R4, Door lining (4 pieces), from vinyl. Color: dark red (bordeaux). Suitable for Renault R4
starting from year of construction 1980
for Renault R4
1986 Articles | Page 28 of 40
R4, door lining (4 fittings) vinyl black. In front + rear. The door linings have vertical quilting
seams. Suitable for Renault R4.
R4, door panels (4 pieces), in imitation leather for special model "Sixties". Suitable for Renault
R4. The model "Sixties" has only been produced 2200x. Very colourful with 2 sunroofs! Made in France
R4, Closing sheet rear (rear side) on the left completely, for the rear cross bar (chassis)
Suitable for Renault R4. The sheet metal is electrolytically galvanized. Made in Europe.
R4, Closing sheet (locking plate) completly at the rear right, for the box sill (chassis). Suitable
for Renault R4. The sheet metal is electrolytically galvanized. Made in Europe.
R4, Reinforcing plate on the left at a-post (behind the side wall sheet metal, between A-post +
fender). Suitable for Renault R4. Or. No. 0353863300
R4, Reinforcing plate on the right at a-post (behind the side wall sheet metal, between A-post +
fender). Suitable for Renault R4. Or. No. 0353863400
R4, Reinforcement cross beam at the floor pan (at the chassis). Suitable for Renault R4. The sheet
metal is electrolytically galvanized. Made in Europe.
R4, front axle mounting plate, front on the left. Suitable for Renault R4, starting from year of
construction 1969. Or. No. 7700525702
R4, front axle mounting plate, front on the right. Suitable for Renault R4, starting from year of
construction 1969. Or. No. 7700525703
R4, front axle rubber set, for one side. Suitable for Renault R4. Contents: 3x bonded-rubber
bushing, stabilizer bearing + bearing flange for thrust strut under the wishbone.
R4, tool for adjusting the torsion bar suspension. Exact reproduction of the tool, which was only
available for official Renault distributors. Suitable for Renault R4.
R4, Windshield clearly. Suitable for Renault R4 + F4. Dimension about: 1100 x 405mm. Extra shipping
cost starting from 59 Euro!
R4, Windshield clearly. Suitable for Renault R4 F6 (station car). Dimension about: 1195 x 420mm
Extra shipping cost starting from 59 Euro!
R4, Windshield seal for chrome sealing trims from synthetic. Suitable for Renault R4. The seal is
mounted with a chrome sealing trim from synthetic.
R4, Windshield seal. Suitable for Renault R4. The seal is mounted without strip or sealing trim
Original suppliers by Renault. Made in France
R4, Trim for the box sill, chromium-plates. Triangular profile. Suitable for Renault R4. Per piece
Suitable clip = 89507! Wide one: 14,0mm. Length: ca. 168cm.
R4, Trim in black (from synthetic), for the rainwater gutter at the roof. Suitable for Renault R4
F6 station car. The trim is only clamped. Length: 750cm.
R4, Trim black (from synthetic), for the rainwater gutter at the roof. Suitable for Renault R4
sedan. The trim is only clamped. Length: 550cm.
R4, Trim chromium-plates (from synthetic), for the rainwater gutter at the roof. Suitable for
Renault R4 F4 + R4 F6 station car. The trim is only clamped. Length: 750cm.
R4, Trim chromium-plates (from synthetic), for the rainwater gutter at the roof. Suitable for
Renault R4 sedan. The trim is only clamped. Length: 550cm.
R4, trim, from polished high-grade steel. Fender in front, on the left + on the right fitting. For
Renault R4. It is the long version, up to the front fender end (with curvature, about 1015mm long).
R4, Cylinder head gasket set. Engine: 680, 839-06, 800, B1B (747cc, 782cc, 845cc). Bore 54,5mm
55,8mm, 58mm. Suitable for Renault R4, of year of construction 1961 to 1982.
R4-F4/ R4-F6, shock absorber rear (2 fittings). Suitable for Renault R4 F4 + F6, of year of
construction 10/1962 to 1992 (station car).
R4/4CV/Dauphine/R5, crankshaft thrust washer (axial clearance), 1 oversize 0,10mm. Dimension: Inner
diameter 44mm, outer diameter 55,6mm, 2mm thick. Suitable for Renault engine: 662, 680 702, 690, 839 706, 670, 800,B1B, 800 70. Capacity 603cc, 748cc, 782cc, 845cc. Suitable for Renault R4, 4CV, Dauphine, Dauphinoise, Juvaquatre, R5 (782cm³), Floride
R4/4CV/Dauphine/R5, crankshaft thrust washer (axial clearance), standard dimension. Dimension
Inner diameter 44mm, outer diameter 55,6mm, 1,9mm thick. Suitable for Renault engine: 662, 680 702, 690, 839 706, 670, 800,B1B, 800 70. Capacity 603cc, 748cc, 782cc, 845cc. Suitable for Renault R4, 4CV, Dauphine, Dauphinoise, Juvaquatre, R5 (782cm³), Floride
R4/4CV/Dauphine/R5, crankshaft bearing set (3 bearing, B = Billancourt). 1 oversize (+0,25). Wide
one: 1x 27,10mm, 1x 30,10mm, 1x 32,84mm. Crankshaft: 39,975 to 39,990mm. Suitable for Renault engine: 662, 680 702, 690, 839 706, 670, 800, B1B, 800 70. Engine capacity 603cc, 748cc, 782cc, 845cc. Suitable for Renault R4, 4CV, Dauphine, Dauphinoise, Juvaquatre, R5 (782cm³), Floride
R4/4CV/Dauphine/R5, crankshaft bearing set (3 bearing, B = Billancourt). 2 oversize (+0,50). Wide
one: 1x 27,10mm, 1x 30,10mm, 1x 32,84mm. Crankshaft: 39,975 to 39,990mm. Suitable for Renault engine: 662, 680 702, 690, 839 706, 670, 800, B1B, 800 70. Engine capacity 603cc, 748cc, 782cc, 845cc. Suitable for Renault R4, 4CV, Dauphine, Dauphinoise, Juvaquatre, R5 (782cm³), Floride
R4/4CV/Dauphine/R5, crankshaft bearing set (3 bearing, B = Billancourt). Standard dimension. Wide
one: 1x 27,10mm, 1x 30,10mm, 1x 32,84mm. Crankshaft: 39,975 to 39,990mm. Suitable for Renault engine: 662, 680 702, 690, 839 706, 670, 800, B1B, 800 70. Engine capacity 603cc, 748cc, 782cc, 845cc. Suitable for Renault R4, 4CV, Dauphine, Dauphinoise, Juvaquatre, R5 (782cm³), Floride
R4/4CV/Dauphine, connecting rod bearing (complete set). Dimension: Standard dimension. (41.128 to
41,138mm). Wide one: 21,16mm. Suitable for Renault engines: 662, 690, 680 702, 839 706, 670, 800 710, B1B. (603cc, 748cc, 782cc, 845cc). Installed from year of construction 1951 to 12/1985. Suitable for Renault R4, 4CV, Dauphine, Dauphinoise, Juvaquatre, R5 (782cm³), Floride, Estafette (747cm³). For piston rod pins: 38,00mm.
R4/4CV/Dauphine/R5, connecting rod bearing set. Wide 21,16mm. 1 oversize (+0,25). Suitable for
Renault engines: 662, 690, 680,702, 839 706, 670, 800 710. (603cc, 748cc, 782cc, 845cc). Installed from year of construction 1951 to 12/1985. For piston rod pins: 37,75mm. Suitable fpr R4, R5, 4CV, Dauphine, Dauphinoise, Juvaquatre, R5 (782cm³), Floride, Estafette (747cm³)
R4/4CV/Dauphine, connecting rod bearing set. Wide 21,16mm. 2 oversize (+0,50). Suitable for Renault
engines: 662, 690, 680,702, 839 706, 670, 800 710. (603cc, 748cc, 782cc, 845cc). Installed from year of construction 1951 to 12/1985. For piston rod pins: 37,50mm.
R4/5, cylinder head gasket set completely, inclusive cylinder head gasket (original REINZ)
Suitable for Renault R4, with 747cc, 782cc + 845cc. Of year of construction 1962 to 1989. Renault R5 (845cc), of year of construction 10/1972 to 12/1984. R6 from 10/1969 to 04/1980. Manufacturer original REINZ!
R4/8/R10/R12, wheel brake cylinder sealing set, rear. for piston diameters: 22,2mm. Brake system
Bendix. Suitable for Renault R4. R8 starting from year of construction 1970. R10, R12, R14, R18.
R4/Dauphine, indicator support in front, for round indicator. Suitable for Renault R4, 1 series +
Renault Dauphine. Outside diameter: 62mm. Or. No. 0854573400
1986 Articles | Page 28 of 40
Select your Citroen 
Please select your Peugeot 
Please select your Citroen Renault 
