for Renault R5-R6

Water pump, suitable for Renault R5 ((R1221, 1391, 1220, engine: 800.7.02, 800.7.100, 0.845L), of

year of construction 1972 to 08/1984. Or. no. 7701457451, 7701461174, 7701508975, 7701509721

• Suitable for this article
• 
  End cap rubber. 10mm inside diameter. E.G., for plugging water pumps or heater
  1,17 €
• 
  Hose clamp 13-20mm, especially for radiator hose. Vintage look. Embossed band
  3,62 €

Water pump seal, on the engine side. Suitable for Renault R5 (1,1L + 1,4L), R5 Alpine + R5 Alpine

Turbo. Or. No. 7700522340. Made in Germany

R5, Windshield seal. Suitable for Renault R5, from year of construction 1972 to 1984. The seal does

not need a trim! Original supplier by Renault. Made in France!

R5, Windshield seal. Suitable for Renault R5, of year of construction 1972 to 1984. For mounting

with flat trim! Original suppliers by Renault, Made in France!

R5. Steering gear manuel. Suitable for Renault R5, starting from year of construction 1979. Or. No

7700667301.

R5/Clio, exhaust fixture (rubber). Suitable for Renault R5 + Clio.

R5/Estafette/R12/R15, engine gasket set completely, inclusive cylinder head gasket. Suitable for

Renault R5, Estafette 1.3, to engine number 212538. Renault R12 + R15 1,3. Used in engines: 810 01, 810 02, 810 2/97, 810 6, 810 10, 810 5.

R5/Estafette/R12/R17, engine gasket set completely, inclusive cylinder head gasket. Suitable for

Renault T5, Estafette 1.3, starting from engine number 212539. Renault R12 + R15 1,3. Used in engines: 810 01, 810 02, 810 2/97, 810 6, 810 10, 810 5.

R5/R10/R12/R15, piston + liner (4 item). Renault engine 810 (1289cc). Suitable for Renault R5LS

TS, GTL. R5 Alpine. R10-1300. R12TS, LN, TR. R15TL, GTL. Bore: 73mm. Piston pin: 20 x 62. Piston rings: 1,75 + 2 + 4,0mm. Compression: 9,5:1. Outside diameter down: 78,41mm. Outside diameter above: 87,78mm. Height totally: 134,0mm.

• Suitable for this article
• 
  piston ring presenting pliers for diameter 40-100.
  22,71 €
• 
  Piston ring compressor, 60 to 90mm clamping range. Hobby version (not for daily
  16,76 €

R5/R12/R15 brake caliper front left. System Bendix. Piston diameter: 48mm. New part. Suitable for

Renault R5, from 01/1972 to 03/1985. R12 from 08/1973 to 08/1980. R15 + R17, from 03/1972 to 10/1980. Or. No. 7701006628

R5/R12/R15/R17/R18, master brake cylinder. Brake system: Bendix. Piston diameter: 19,05mm. Suitable

for Renault R5, R12, R15, R17, R18. Brake line connector: 3 x M10. Made in Europe.

R5/R12/R16/R17/Alpine A310, Sealing set brake caliper in front, for Renault R5 starting from

01/1975, R12 all models, R15 all models, R16 all models, R17 Gordini, A310 of 6 liners of year of construction 1976 to 1980. 48mm piston, system Bendix. 2 different dust caps are attached. Mount the correct dust cap. The other cap, please dispose it.

• Suitable for this article
• 
  R16, piston for brake caliper in front. Brake system Bendix. Diameter: 48mm
  16,76 €

R5/R12/R30, brake caliper sealing set, rear. For piston diameters: 36mm. Suitable for Renault R5

Alpine Turbo, R12 Gordini, R18 Turbo, R30.

R5/R16, indicator in front completely (2 item). Suitable for Renault R5 turbo 1 Venturi + R16 TX

Reproduction

R5/R16, seal for the shift rod (shift lever) on 385 gearboxes. Suitable for Renault R5-Alpine, R16

Or. No. 7700552718

Gearbox suspension for 5 gear gearbox. Suitable for Renault R16 TX. Renault R5, R12, R15, R16. Or

No. 7700557330

R5/R17, brake pads mounting set. Brake system: Bendix. Suitable for Renault R5 + R17.

R5/Rodeo, engine gasket set completely, inclusive cylinder head gasket. Suitable for Renault R5 +

Rodeo. Engine: 1289cc. 42 to 64HP. Used in engines: 810-719, 810-725, 810-726, 810-25, 810-26. Original by Glaser!

R6, drive shaft. Suitable for Renault R6 (fits left + right). Length: 633 mm. Number of teeth on

wheel side: 23. Number of teeth on gearbox side: 23. New part.

R6, indicator front on the left. Suitable for Renault R6, starting from year of construction

06/1973. Or. No. 7701016851

R6, indicator front on the right. Suitable for Renault R6, starting from year of construction

06/1973. Or. No. 7701016853

R6, turn signal cap angularly. Suitable for Renault R6.

R6, turn signal cap front on the left. Suitable for Renault R6.

R6, turn signal cap front on the right. Suitable for Renault R6.

R6, wishbone front axle, lower on the left. Suitable for Renault R6.

R6, taillight cap on the left. Suitable for Renault R6, starting from year of construction 06/1973

Or. No. 7701016861

R6, taillight cap on the right. Suitable for Renault R6, starting from year of construction 06/1973

R6, deadlamp front on the right, version double-filament bulb. Suitable for Renault R6. Original

CIBIE.

R6, headlamp fixture on the left. Suitable for Renault R6.

R6, headlamp fixture on the right. Suitable for Renault R6.

R6, Bumper in front, chromium-plates. Suitable for Renault R6, to year of construction 1973.

R6, Carpet set of loop pile anthracite. Suitable for Renault R6.

R6, Carpet set Velour cream (beige). Suitable for Renault R6.

Wheel Stud Restorer Kit. For repairing damaged wheel stud threads using a reverse action to ensure

the alignment of the thread. Includes adaptor sizes: M12 x 1.25mm. M12 x 1.5mm. M14 x 1.5mm.

Wheel bolt, suitable for many Renault (R5, R5 Alpine, R12, R16). Overall length: 38mm. Thread

M12x1,25. The wheel bolt head has a diameter of 18mm and is 5mm heavily. Or. No. 0554732800

Wheel brake cylinder at the rear left. Brake system Bendix. Piston diameter: 22,22mm. Brake line

connector: M10x1. Note: The distance of the fixing holes (threads) is only 25mm! Mounting board bore: 32mm. Suitable for Peugeot 309. Renault Fuego, R5, Super 5, R9, R11, R18, R21. Made in Europe.

• Suitable for this article
• 
  Brake cylinder paste. Manufacturer: FÖRCH. 5g brake cylinder paste for
  5,31 €

Radio console for Renault R5L/TL/TS, first version. Original Renault accessory. This beautiful

console was produced particularly for R5. It is installed a loudspeaker.

Wheel bearing rear, inside. Suitable for Renault R4, R12, Fuego, R15, R16, R17, R20, R30, R5, R6

R7. Outside diameter: 52mm. Inside diameter: 25mm. Wide one: 16,25mm. Made in Spain

Wheel bearing in front. Suitable for Renault R4, R5, R6. Dimension: 62 x 30 x 16. Made in Spain

Wheel bearing. Suitable for Renault R4, R5, R12, R16. Dimension. 25 x 47 x 15mm. Made in Spain

Wheel bearing. Suitable for Renault R4, R5, R8, R10. Peugeot 104. Citroen LNA. Dimension:: 40 x 17

x 13,25mm. Made in Spain

Rear wheel bearing set (original equipment quality). Suitable for Renault R4. R5, R6, R8, Dauphine

e, R16 all models from year of construction 11/1976 to 1980. R12 from year of construction 1977 to 1980. Dimension bearing 1: 47x25x15 mm. Bearing 2: 42x20x15 mm. Or. No. 7701460642.

Rear wheel bearing set (replica). Suitable for Renault R4. R5, R6, R8, Dauphine, R16 all models

from year of construction 11/1976 to 1980. R12 from year of construction 1977 to 1980. Dimension bearing 1: Outside diameter: 47,0mm. Inner diameter: 25,0mm. Overall height: 15,0mm. Bearing 2: Outside diameter: 42,0mm. Inner diameter: 20,0mm. Overall height: 15,0mm. Or. No. 7701460642

Wheel bearing set of rear axle, suitable for Renault R4, R5, R16, R17. Bearing 1: Outside diameter

47mm, inside 20,0mm, wide one 15,25mm. Bearing 2: Outside diameter 52mm, inside 25mm, wide one 16,25mm. Dimension shaft seal: Outside diameter 58mm, inside 48mm, height of 4mm. Made in Spain

Wheel bearing set of rear axle. Suitable for Renault R4, R6, R16. Dimension bearing 1: Outside

diameter: 47mm. Inside diameter: 19,80mm. Wide 12,00mm. Dimension bearing 2: Outside diameter 52mm. Inside diameter: 25mm. Wide 13,00mm.

Wheel bearing set rear. Suitable for Renault R4, R5, R6, R8, Dauphine. Dimension bearing 1: 40 x 17

x 13,25mm. Bearing 2: 47 x 22 x 20,75mm. Shaft seal. Made in Spain

Rear wheel bearing set. Suitable for Renault R4, from 09/1962 to 06/1986. R5 from 01/1972 to

06/1984. R6 from 10/1968 to 04/1980. Renault Dauphine, R8, R10, Alpine A110. Dimension bearing 1: 40 x 17 x 13,25mm. Bearing 2: 47 x 22 x 20,75mm.

Wheel bearing set front. Suitable for Renault R4, R5, R6. Dimension bearing 1: 62 x 30 x 16

Bearing 2: 62 x 30 x 16mm. Original equipment quality.

• Suitable for this article
• 
  R4/R5, thrust washer - brass sealing disc. This disc is mounted on the drive
  8,33 €

Wheel bearing set for the front axle, suitable for Renault R4, R5, R6. Consisting of 2 wheel

bearings. Dimension bearing 1: Outside diameter 62,0mm. Inside diameter 30,0mm. Wide 16,0mm. Dimension bearing 2: Outside diameter 62,0mm. Inside diameter 30,0mm. Wide 16,0mm. Note: These bearings do not have an O-ring!

Wheel bearing set for the front axle, suitable for Renault R4, R5, R6. Consisting of 2 wheel

bearings. Dimension bearing 1: Outside diameter 62mm. Inside diameter 30mm. Wide 16mm. Dimension bearing 2 with O-ring: Outside diameter 62mm. Inside diameter 30mm. Wide 16mm. Made in Spain