Washer reservoir with integrated, electrical water pump. 12 V. Capacity: 1.2 L. width: 122mm
overall height totally: 185mm. Building depth altogether: 100mm. The reservoir is supplied with fixture. The fixture is from the rear at the reservoir.
for Renault R5-R6
1442 Articles | Page 24 of 29
Windscreen washer reservoir with integrated electric water pump. 12 volt. Suitable for Renault R4
R5, R6, R7, R12. Corresponds to original number: 7700628056
Wiper nozzle synthetic grey. Universal fitting. 4mm hose connection. The wiper nozzle is locked
with a nut from rear. 1 water jet. Low body height. Mounting diameter: 8,0mm.
Windscreen washer nozzle black. Universal fitting. 4mm hose connection. The washer nozzle is
screwed with a nut from behind. 2x water jet. Flat design.. Mounting diameter: 8,0mm.
Washer pump electrical. 12 V. Very stable version with galvanized metal fixture. 2x flat plug
connection from above! Made in the European Union. The picture indicates the correct mounting position. The pump section is down, the electric motor above!
Foot-operated pump set for windschield wiper fluid. Consisting of foot pump, 2 return flow
stoppers, 1x T-valve, 3 meters hose. Assembly: Starting from the foot pump with the T-valve, 1x to the reservoir (place the valve in such a way that the water from the reservoir can pass through) and 1x to the windshield washer nozzle (valve lets the water pass in the direction of the nozzle). The flow directions are marked with an arrow on the valve. Assembly instruction online in the shop.
PDF FILE Windscreen washing water hand pump. Reproduction, completely with sheet metal holder for a later
mounting! Suitable for Citroen 2CV. In addition, the pump can be universal installed.
Headlamp mounting bolt (stud bolt with ball). Dimension: 5 x 36mm. Thread: M5. Universal suitable
for many French vehicles.
Universal protective rubber (e.g. for protecting electric cables, brake lines, brake hoses
handbrake cables, speedometer cables, petrol hose... External dimensions: 23x30mm. Inner diameter: 8mm. The rubber is slit on one long side, and can therefore be easily placed over the cable to be protected!
Universal protective rubber (e.g. for protecting electric cables, handbrake cables, petrol hose
External dimension: 42mm. Length: 31mm. Inner diameter: 12mm. The rubber is not slit (but of course this can be done afterwards if it makes assembly easier)
Tube bending sleeve. Suitable for hose outer diameter of 12,5 > 13,4mm. Length: 60mm. With this you
can easily produce bent water hoses. Simple and ingenious!
Tube bending sleeve. Suitable for hose outer diameter of 14,6 > 16,4mm. Length: 65mm. With this you
can easily produce bent water hoses. Simple and ingenious!
Tube bending sleeve. Suitable for hose outer diameter of 16,5 > 18,4mm. Length: 70mm. With this you
can easily produce bent water hoses. Simple and ingenious!
Tube bending sleeve. Suitable for hose outer diameter of 18,8 > 21mm. Length: 75mm. With this you
can easily produce bent water hoses. Simple and ingenious!
Tube bending sleeve. Suitable for hose outer diameter of 21,8 > 24mm. Length: 90mm. With this you
can easily produce bent water hoses. Simple and ingenious!
Hose clamp 11-17mm, especially for radiator hose. Vintage look. Embossed band with raised edges
This prevents the hose from being damaged. Small screw housing with 7mm hexagon head screw (with slot). Normal, modern hose clamps squeeze the hose. This is completely avoided with these clamps. And they even look better.
Hose clamp 13-20mm, especially for radiator hose. Vintage look. Embossed band with raised edges
This prevents the hose from being damaged. Small screw housing with 7mm hexagon head screw (with slot). Normal, modern hose clamps squeeze the hose. This is completely avoided with these clamps. And they even look better.
Hose clamp 15-24mm, especially for radiator hose. Vintage look. Embossed band with raised edges
This prevents the hose from being damaged. Small screw housing with 7mm hexagon head screw (with slot). Normal, modern hose clamps squeeze the hose. This is completely avoided with these clamps. And they even look better.
Hose clamp 19-28mm, especially for radiator hose. Vintage look. Embossed band with raised edges
This prevents the hose from being damaged. Small screw housing with 7mm hexagon head screw (with slot). Normal, modern hose clamps squeeze the hose. This is completely avoided with these clamps. And they even look better.
Hose clamp 22-32mm, especially for radiator hose. Vintage look. Embossed band with raised edges
This prevents the hose from being damaged. Small screw housing with 7mm hexagon head screw (with slot). Normal, modern hose clamps squeeze the hose. This is completely avoided with these clamps. And they even look better.
Hose clamp 26-38mm, especially for radiator hose. Vintage look. Embossed band with raised edges
This prevents the hose from being damaged. Small screw housing with 7mm hexagon head screw (with slot). Normal, modern hose clamps squeeze the hose. This is completely avoided with these clamps. And they even look better.
Hose clamp 32-44mm, especially for radiator hose. Vintage look. Embossed band with raised edges
This prevents the hose from being damaged. Small screw housing with 7mm hexagon head screw (with slot). Normal, modern hose clamps squeeze the hose. This is completely avoided with these clamps. And they even look better.
Hose clamp 38-50mm, especially for radiator hose. Vintage look. Embossed band with raised edges
This prevents the hose from being damaged. Small screw housing with 7mm hexagon head screw (with slot). Normal, modern hose clamps squeeze the hose. This is completely avoided with these clamps. And they even look better.
Hose clamp 40-56mm, especially for radiator hose. Vintage look. Embossed band with raised edges
This prevents the hose from being damaged. Small screw housing with 7mm hexagon head screw (with slot). Normal, modern hose clamps squeeze the hose. This is completely avoided with these clamps. And they even look better.
Hose clamp 50-65mm, especially for radiator hose. Vintage look. Embossed band with raised edges
This prevents the hose from being damaged. Small screw housing with 7mm hexagon head screw (with slot). Normal, modern hose clamps squeeze the hose. This is completely avoided with these clamps. And they even look better.
Hose clamp 57-75mm, especially for radiator hose. Vintage look. Embossed band with raised edges
This prevents the hose from being damaged. Small screw housing with 7mm hexagon head screw (with slot). Normal, modern hose clamps squeeze the hose. This is completely avoided with these clamps. And they even look better.
Blank key for door lock. Suitable for Renault R12, from 1969 to 1971. R15 from 1971 to 1979. R16
from 1965 to 1980. R17 from 1971 to 1979. R5 from 1972 to 1979. R6 from 1968 to 1980. For lock manufacturers: RONIS. Please observe the cross section of the key bit. Shaft length: 19,8mm. Shaft wide: 7,0mm.
Blank key for starter lock. Suitable for Renault R5, of year of construction 1972 to 1979. R14 from
1976 to 1977. R15 + R17, from 1971 to 1979. R6 from 1968 to 1980. For lock manufacturers: NEIMAN. Please observe the cross section of the key bit. Shaft length: 22,4mm. Shaft wide: 7,0mm.
Screw set M5-M8 galvanizes. Consisting of: 20x M5x20, 15x M5x30, 25x M6x16, 20x M6x20, 12x M6x25
8x M6x30, 10x M7x20, 8x M7x30, 15x M8x20, 10x M8x30, 8x M8x40. Altogether 151 screws in a clear synthetic box.
Screw-safety-paint, yellow, 20ml bottle including brush. This paint to be fit as sealing and
marking paint and can be directly brought onto the spot which has to be marked.Standart product in the 60´s for marking on gearboxes, engines, hydraulic parts and chassis parts
Heat shrink tubing (kit from 100). These handy sheaths form a protective water resistant insulation
over exposed wiring and electrical connections. Designed for automotive use. Supplied in a plastic organiser.
Flywheel bolt (per piece). Suitable for Renault R4, R5, R6, R7, R8, R10... Original Renault! M
9x1,0 x 25mm, Or. No. old: 0706307900. Or. No. new: 7700854191
SEV, condenser. Suitable for Citroen DS (with SEV contact cartridge, starting from year of
construction 01/1969), GSA, HY. Peugeot 404, 504 etc.. Renault R4, R5, Fuego etc.. Length: 35,5mm. Diameter: 17,0mm. Brand manufacturer! Made in France.
SEV, ignition contact (large sickle type). Version SEV S403. This contact fits nearly for all
French cars, from the fifties + sixties, which have a SEV distributor. E.G. for Citroen ID-DS (year of construction 7/1954 to 8/1967). Citroen 11CV + HY. Peugeot 403 + 404 (of year of construction 1960 to 1975). Renault Dauphine, Floride, Caravelle, R6, Estafette. Talbot all models, with SEV distributor. Made in France.
1442 Articles | Page 24 of 29
Select your Citroen 
Please select your Peugeot 
Please select your Citroen Renault 
