for Renault Sonstige-Renault

H7 bulb clearly, 12 Volt.

Hook set, 135 mm long. 4 pieces, ideal for removing O-rings, seals, Citro

Fixture for the rod of the locking mechanism. Suitable for various Renault.

Fixture for angular switches (for mounting under the dashboard). Suitable for switch with 36x18mm

installation hole.

Retaining clip for the seal from the luggage compartment lid. Suitable for Citroen 11CV/15CV

Citroen DS. Dimension: 10 x 14mm. Also suitable for other French vehicles. Or. No. 802698, DM453-120C

Handhold for lacquer aerosol spray. Facilitates exactly and controlled alloting of the spray. A

real alleviation.

szction pump (hand pump) for eG fuel, hydraulic liquid

Hand washing cream, 500ml

Flexible disk for the steering column. Suitable for Renault R4, R5, R8, R16, R18, Dauphine. Outside

diameter: 76mm. Inside diameter: 24mm. Pitch center diameter: about 50mm.

Master brake cylinder, 1 inch (25,4mm) piston. Suitable for Citroen 11CV + 15CV. Citroen HY

Renault Fregate, Juva 4. Simca Vedette, Regence, Versailles to year of construction 7/1955. Made in Europe.

• Suitable for this article
• 
  Brake fluid reservoir with locking cap, for the brake system DOT. Suitable for
  19,73 €
• 
  Collar for the master brake cylinder (for 1 inch (25,4mm) master brake
  4,86 €

Master brake cylinder. Brake system Bendix. Piston diameter: 19,05mm. Suitable for Renault R5, R16

R5, R17, R12, Fuego. Brake line connector: 3x M10x1 + 1x M12x1. Made in Europe.

Heater valve. Suitable for Renault R12, R20. Renault Alpine A310. Or. No. 7701348153

Heli coil application M7. Length: 10,5mm (Thread repair)

Heli coil application M7. Length: 7,0mm (Thread repair)

Heli coil application M7. Length: 14,0mm (Thread repair)

Thread Repair Kit M7x1, for repairing damaged threads. For plating threads in materials with low

shearing strength 1 twist drill, 1 tap, 1 installation tool, 1 tang breaker, 25 x M7x1 coil.

Helicoil repair set for M7. Consisting of: Twist drill (to M12), hand taps from HSS, mounting

spindle, insertion pin breaker (to M12). In each case, 10 theaded inserts M7 in the lengths: 7,0mm, 10,5mm, 14,0mm. Original Helicoil, no reproduction.

Inside roof lining adhesive from Teroson. Contents: 680g. Light, transparent adhesive material for

the roof and door linings.

Roll Pin Assortment, 450 pcs. Diameter from 2 > 10mm, lenght 5>50mm.

Cavity preservation on wax basis, for cavity pistol, 1 litre.

• Suitable for this article
• 
  Underbody coating nozzle (gun) + cavity preservation nozzle (gun), for 1 liter
  26,68 €

Body cavity protection spray, 500 ml. Inclusive hollow space probe

• Suitable for this article

Cavity probe (60cm) for fluid film spray can (21127)

Hone segment 100x10mm (3 fittings) for engine cylinder hone 20918.

Hone segment 30x4mm (2 fittings) for brake cylinder hone 20916.

Horn (12 V), completely with air compressor + 2 x compressed air horn, relay and air hoses. 750 +

800Hz (2 different tones). 115dB (A). Length of the air horns: 210 + 165mm. Length of the air compressor: about 105mm.

Horn (trumpet) 12 V, high tone. 480Hz, 108dB (A). Very high quality horn, made in the European

Union. The horn is made of metal, with a red cover (trumpet) from plastic! Universal fitting. Diameter: about 110mm. ECE checked.

Horn (trumpet) 12 V, deep tone. 420Hz, 108dB (A). Very high-quality horn, made in the European

Union. The horn is made of metal, with a red cover (trumpet) from red synthetic! Universal fitting. Diameter: about 110mm. ECE checked.

Horn, 12V. Universal fitting.

Horn 12 V, high tone. 430Hz, 114dB (A). Very high quality horn, made in the European Union. The

horn is from the front in red painted! Universal fitting. Diameter: about 91mm. Metal housing. ECE checked.

Horn 12 V, deep tone. 340Hz, 114dB (A). Very high quality horn, made in the European Union. The

horn is from the front in red painted! Universal fitting. Diameter: about 91mm. Metal housing. ECE checked.

Horn 6 V. Universal suitable. Diameter: About 100mm. Completely made from metal.

Horn, 12Volt. Universal fitting. Diameter 100mm! The horn is chromium-plated.

Horn set (2 pieces) chrom-plated, from Bosch. Frequencies: 325 and 400 Hertz. Volume: 118 db(A)

operating voltage: 12 V, power consumption: 48 W each, diameter: 156 mm, depth: 91 mm, EMV protection: included. Universal fitting.

Hydraulic + brake pipe handle made of metal. The fixture has a rubber lining and is to attach

Suitable for 4,5mm line.

Hydraulic + brake pipe handle made of metal. The fixture has a rubber lining and is to attach

Suitable for 6,35mm line.

Hydraulic + brake pipe handle made of metal. The fixture has a rubber lining and is to attach

Suitable for 8,0mm line.

Hydraulic + brake pipe handle to attach, from synthetic. Suitable for 3,75mm line.

Hydraulic + brake pipe handle to attach, from synthetic. Suitable for 4,5mm line.

Hydraulic + brake pipe handle to attach, from synthetic. Suitable for 6,35mm line.

Hydraulic line Brake line flaring tools for use at the vehicle (to use at the car). For all

flanging! For all Citroen lines with 3,5mm, 4,5mm + 6,35mm (1/4 "). For all lines after DIN/CSAE, for flanges of the types CD, E, F, F180 in the usual quantities 4,75mm, 6mm, 8mm, 9mm and 10mm.

• Suitable for this article
• 
  Brake pipe bending pliers! Been suitable for sheet metal, copper, stealing and
  25,29 €

Interior insulation mat (approx 10mm thick), self adhesive, optically as from the years 60s to

approx. end of the 70s. Dimensions: approx. 115 x 55cm (about 600g/m

Interior insulation mat (approx 15mm thick), self adhesive, optically as from the years 60s to

approx. end of the 70s. Dimensions: approx. 115 x 55cm (about 900g/m

Interior insulation mat (approx 20mm thick), self adhesive, optically as from the years 60s to

approx. end of the 70s. Dimensions: approx. 115 x 55cm (about 1200g/m

Interior insulation mat for the floor (approx 15mm thick), optically as from the years 60s to

approx. end of the 70s. Dimensions: approx. 105 x 55cm (approx. 3200g/m

Interior insulation mat for the floor (approx 20mm thick), optically as from the years 60s to

approx. end of the 70s. Dimensions: approx. 105 x 55cm (approx. 3500g/m

Interior insulation mat for the floor (10mm thick), optically as from the years 60s to approx. end

of the 70s. Dimensions: approx. 105 x 55cm (approx. 2900g/m

Interior mirror holder (self-adhesive), suitable for Renault R5 from year of manufacture 01/1972 to

06/1985. Renault R14. The mirror base is plugged in (pushed into the holder). The bracket is glued on.

Inside mirror chromium-plates. Dimension about: 125 x 55mm. The mirror does not have a fixture

only a moving threaded bolt with M5 thread.

interior mirror, suitable for renault R4, R5, R16. The mirror base is screwed on.

Instrument fixture (made of metal) for 2 additional instruments with 52mm diameter. Universal

fitting. Made in Germany.