R8/R10/Dauphine, gear knob with emblem. Thread M12x1.75 mm. With adapter for use with 10 mm + 12 mm
shift rod (gear stick). Suitable for Renault R8, R10, Dauphine... Very nice reproduction!
for Renault Sonstige-Renault
1383 Articles | Page 21 of 28
R8/R10/Dauphine, gear knob with Gordini emblem. Thread M12x1.75 mm. With adapter for use with 10 mm
12 mm shift rod (gear stick). Suitable for Renault R8, R10, Dauphine... Very nice reproduction!
R8/R10/Dauphine, gear knob with Renault emblem. Thread M12x1.75 mm. With adapter for use with 10 mm
12 mm shift rod (gear stick). Suitable for Renault R8, R10, Dauphine... Very nice reproduction!
Wheel Stud Restorer Kit. For repairing damaged wheel stud threads using a reverse action to ensure
the alignment of the thread. Includes adaptor sizes: M12 x 1.25mm. M12 x 1.5mm. M14 x 1.5mm.
Wheel bolt, suitable for many Renault (R5, R5 Alpine, R12, R16). Overall length: 38mm. Thread
M12x1,25. The wheel bolt head has a diameter of 18mm and is 5mm heavily. Or. No. 0554732800
Wheel brake cylinder rear (system Bendix), left or on the right suitable. For Citroen C15. Renault
Espace I, Fuego, R12, R18. Piston diameter: 22,2mm. Mounting board bore: 36mm. Brake line connector: 10x1 mm. Length over everything: 70mm.
Wheel brake cylinder at the rear left. Brake system Bendix. Piston diameter: 22,22mm. Brake line
connector: M10x1. Note: The distance of the fixing holes (threads) is only 25mm! Mounting board bore: 32mm. Suitable for Peugeot 309. Renault Fuego, R5, Super 5, R9, R11, R18, R21. Made in Europe.
Radio console for Renault R12. Original Renault accessory. This beautiful console was produced
particularly for the R12. It is installed a loudspeaker.
Radio console for Renault R15. Original Renault accessory. This beautiful console was produced
particularly for the R15. It is installed a loudspeaker.
Wheel cover screw. Suitable for Renault R4 (1120, 1123, 1125, 1126, 2106, 2108). Renault R12 + R16
Thread: M12 x 1,5. Length: 18mm. Tool: 17mm. Or. No. 7701088119 + 0608400900
Wheel cover screw. Suitable for Renault R4 (1123, 1125, 2108). Renault R12 + R16. Thread: M12 x
1,5. Length: 18mm. Tool: 19mm. Or. No. 7700562810
Wheel cover screw. Suitable for Renault R4, 4CV, Dauphine, Floride, Fregate. Thread: M12 x 1,75
Lenght: 22mm. Wrench: 19mm.
Wheel bearing rear, inside. Suitable for Renault R4, R12, Fuego, R15, R16, R17, R20, R30, R5, R6
R7. Outside diameter: 52mm. Inside diameter: 25mm. Wide one: 16,25mm. Made in Spain
Wheel bearing set front axle. Suitable for Renault R16, R12. Bearing 1: Outside diameter: 72mm
Inside diameter: 35mm. Wide one: 21mm. Bearing 2: Outside diameter: 72mm. Inside diameter: 35mm. Wide one: 17mm.
Wheel nut short, galvanizes, for 2CV, Dyane, Mehari, AMI, GS, DS. Peugeot 403, 404, 204, 304, 504
505. Thread: M12x1,25. Lubricate before mounting. Original supplier! Been suitable to torque: 130Nm
Wheel nut, suitably for R16TX, R12, R15, R17, R18, R20, R30 etc. Thread: M12 x 1,25. Overall
height: 32,5mm. Tapered. Wrench: 19,0mm. Or. No. 7700618233
Wheel nut, suitable for Renault R16TX, R12, R15, R17, R18, R20, R30 etc.. Thread: M12 x 1.25
Height: 38.5mm. Tapered collar. Width across flats: 19.0mm. Or. No. 7700532727
The brake-down aid for on the road. SONAX TyreFix restores driveability to flat tyres, without tyre
change. Seals small holes in the tyre and pumps it up. Practical, fast and safe. 400ml
Tire 135/15 with 20mm white wall. Manufacturer Michelin. The white wall is later up-vulcanizes
Delivery time about 2-4 weeks.
Tire 155R400X TT83S (X - profile). Manufacturer Michelin. Suitable for Citroen 2CV Sahara. Citroen
DS on the rear axle (fifties - at the beginning of sixties). Peugeot 203, Renault Juvaquatre
Tire 165R15 86V TL XAS NO. Manufacturer Michelin. Suitable for Citroen DS. Peugeot 403, Peugeot
404. Simca Ariane, Renault Fregate
Tire R135/15 ZX. Manufacturer Michelin. Summer tire. Suitable for Citroen 2CV, AK, AMI, Mehari
Renault Caravelle, Renault 4CV, R8, R10, Dauphine Ondine
Tire valve adapter of TR13 (13mm) on TR15 (15mm). This adapter is required, if you have old rims
with 15mm hole for valves. New valves are always 13mm in the diameter.
Renault emblem, universal. Dimension: 62 x 50mm. Material: Synthetic. Fastening: 2x split pins with
5mm diameter (the pins have a bar, with bar the diameter is 6mm).
Rosette 13/5mm with screw. Contents: 12 pieces + 12x screw 4mm/16mm. This rosette consists only of
a punched-out sheet metal which has been nickel-plated. They are not as sturdy and pretty as our numbers 21143, 21144, 21145, but these rosettes are more like the original rosettes used in early Citroen 2CV, R4, Dauphine etc. Higher-quality vehicles were more likely to have our shiny alternatives (e.g. Citroen DS).
Rosette from rubber synthetic, frame of the trunk lock, suitable for Renault R16, R5, R6, R18. 1
art drinking hook. Inside diameter: about 20mm. Outside diameter: about 32mm. Or.Nr. 556130100
Rosette chrom-plated, under the window crank. Suitable for Citroen 11CV + 15CV. Dimension: 45 x
10mm. Or. No. 132808. Also universal suitable for Peugeot, Citroen, Renault.
Rosette nickel plated. For 4mm screw. Outside diameter: 11mm. Height: 2,4mm. These rosettes were
used for dashboard, door linings. Suitable for Citroen 2CV, DS, HY and in many Peugeot + Renault. Our rosettes are shiny and flanged at the back. This makes them very stable.
Rosette nickel plated. For 4mm screw. Outside diameter: 12,7mm. Height: 2,5mm. These rosettes were
used for dashboard, door linings. Suitable for Citroen 2CV, DS, HY and in many Peugeot + Renault. Our rosettes are shiny and flanged at the back. This makes them very stable.
Rosette nickel plated. For 5mm screw. Outside diameter: 13mm. Height: 3,0mm. These rosettes were
e used for dashboard, door linings. Suitable for Citroen 2CV, DS, HY and in many Peugeot + Renault. Our rosettes are shiny and flanged at the back. This makes them very stable.
Rust eraser pen. Ideal for removing even the smallest rust spots. Indispensable! And, of course
the cleaned rust spot must then be preserved with paint immediately.
Back-up light reproduction (Hella), the housing is made of plastic. Width 120mm, height of 70mm
The headlamp is for a later mounting underneath the bumper! It cannot be used as substitute for the original backup lights from R4! Lampholder for the bulb: Ba15s. Maximum 21Watt. (Our number 14035 + 14045).
Return stop (valve) for fuel or windscreen washer fluid. Connection: 6 mm. This valve is a real
improvement for classic vehicles that use a hand pump without a ball valve to deliver water. This ensures that windscreen washer fluid is always available at the spray nozzles. Please note the direction of flow during installation! It also prevents petrol from flowing back in the fuel line (useful for longer periods of inactivity). Please install this valve close to the petrol pump (between the petrol pump and the tank).
Tail lamp and/or stop light round, original Seima 3054. 3055. (no reproduction, with test symbol
E") 1 thread light, only brake or taillight! With metal base + support! The glass has 68,5mm diameter! Used in HY, AZU, DS - in many Renault + Peugeot models as well!
Reflector square, framed in metal. With fixing straps, dimensions approx. 60x45mm. These reflectors
were used in many French cars!
Reflector with locking collars. Suitable for Citroen AK, AZU, HY. Universal suitable for other
classic cars. Diameter: 56mm.
1383 Articles | Page 21 of 28
Select your Citroen 
Please select your Peugeot 
Please select your Citroen Renault 
