for Renault Sonstige-Renault

R12/R15/R17/R18 TL+TS/R20 >1980, ball and socket joint down. Pin height to area for screwing: 65mm

Thread height: 23mm. Thread measurement: M12 x 1,25. Or. 7701460886

R12/R15/R17/R18 TL+TS/R20 until 1989, ball and socket joint above. Pin height to area for screwing

65mm. Thread height: 25mm. Thread measurement: M12 x 1,25. Or. 7701460885

R12/R15/R17/R18, ball joint lower. Suitable for Renault R12, R15, R17, R18. Pin amount to area for

screwing: 62mm. Thread height: 23mm. Thread measurement: M12 x 1,25.

R12/R16/R17, engine gasket set completely, inclusive cylinder head gasket. Suitable for Renault

R16, R12, R17. Engine: 807 03, 807 04, 807 05, 807 10. Engine capacity: 1565cc. Bore: 77mm.

R15, coverings (2 x front seat, 1x rear seat). Suitable for Renault R15. Material: Vinyl black.

R15, coverings (2 x front seat, 1x rear seat). Suitable for Renault R15. Material: Vinyl wine-red

(Bordeaux).

R16, Drive pinion (per piece) for the drive shaft of the sunroof. Suitable for Renault R16, R17

R20, R30

R16, brake pads front. Brake system: Bendix. Suitable for Renault R16 TX, starting from year of

construction 1974. Renault R12. Wide one: 108,9mm. Amount: 49mm. Heavy one: 16mm. Or. No. 7701200247

R16/Alpine, camshaft with distributer propulsion. For Renault engine 807-841 + 843. Suitable for

Renault R16 TS + R16 TX. R17 + R12 Gordini. Renault Alpine A110. New part.

R16/Estafette/R15, wheel brake cylinder rear, on the left + on the right fitting. Brake system

Bendix. Suitable for Renault R16, Estafette, R15 TS, R12 BREAK, R17TL/TS. Piston diameter: 22mm. Brake line connector: 3/8x24UNF. Mounting board bore: 36mm. Length over everything: 69mm. Made in Europe.

• Suitable for this article
• 
  Brake cylinder paste. Manufacturer: FÖRCH. 5g brake cylinder paste for
  5,56 €

R16/R12, headlamp, without "E" mark (reproduction). Suitable for Renault R16 + R12.

R16/R12, silent beech for the securement of the gear lever. Suitable for Renault R12 + R16. Inside

diameter 10mm, outside diameter 22mm, length 25mm, length over all 30mm.

R16/R12, gear rack eye (tie rod securement) for Renault R12, R16, R15, R17, R20. Thread M12x1. Or

No.7700504987

• Suitable for this article
• 
  Nut M12x1
  0,79 €

R16/R12/Alpine A310, caliper sealing set, front. Brake system: Bendix. Suitable for Renault R16

R12, Alpine A310. For piston diameter: 54mm.

R16/R12/R15, brake hose front (on the left + on the right befitting). Suitable for Renault R16, of

year of construction 1965 to 1976. Renault R12, R15. 1x female thread 3/8 x 24h. 1x male thread: 3/8 x 24h. Or. No. 7701348758

R16/R12/R16, piston ring set (for 1 piston). Suitable for Renault R16, R12, R17. Bore: 77mm

Engine: 821 + 807 (1565cc). Piston ring thickness: 1,75 + 2.0 + 4,0mm.

• Suitable for this article
• 
  piston ring presenting pliers for diameter 40-100.
  22,71 €
• 
  Piston ring compressor, 60 to 90mm clamping range. Hobby version (not for daily
  16,76 €

R16/R12/R17, steering gear - tie rods collar set (2 fittings). Suitable for Renault R16, R12, R17.

R16/R12Gordini/R17/R20. Camshaft drive chains set, consisting of camshaft drive chain duplex - 72

chain links, gear crankshaft of 18 teeth, chain tensioners. Suitable for 1565cc, 1647cc, 1605cc. Original supplier.

R16/R12TS/Alpine 110, master brake cylinder. Brake system: Bendix. Suitable for Renault R16, R12TS

R5 (1,0L to year of construction 11/1977), Alpine A110. Piston diameter: 19,0mm. Brake line connector: 3x 3/8 x 24UNF. Or. No. 700548977. Made in Europe.

R16/R15/R12, brake hose front. Suitable for Renault R16, R12, R15. Length: 345mm. Thread: 1x female

thread 3/8x24. 1x male thread 3/8x24. Made in Europe.

R16/R15/R12/Alpine, safety sheet for the fly wheel. Suitable for Renault, with 1600ccm engine. Or

No. 0608395100

R16/R15/R17, thrust washer (thrust bearing) crankshaft. Standard size. Suitable for Renault R16

R15, R17. Renault Alpine (4 cylinders), Fuego, R20, Trafic. Engines: 697/807/821/843. Reproduction from the EU.

R16/R17, gear wheel (pinion) for the window lifter. Suitable for Renault R16 + R17. Per piece

Diameter: 53mm. Thickness: 6.3mm

R16/R17/R18/R20, piston + liner (4 item). Renault engine 841 01

04/02/05/06/15/16/10/11/99(1647cc). Suitable for Renault R16TX, TA. R17TL. R18TS, GTS. R20TL. Fuego. R12. Bore: 79mm. Piston pin: 21 x 69mm. Piston rings: 1,75 + 2 + 4,0mm. Outside diameter down: 84,0mm. Outside diameter above: 96,0mm. Height totally: 143,50mm.

• Suitable for this article
• 
  piston ring presenting pliers for diameter 40-100.
  22,71 €
• 
  Piston ring compressor, 60 to 90mm clamping range. Hobby version (not for daily
  16,76 €

R16/R18/R20, bottom liner gasket (foot gasket. Suitable for Renault R16 TA (01/1973 to 08/1980) +

R16 TX (06/74 to 09/80. Engine code 843.01). R18 + R20 (engines: 843-05, 843 723/20, 807 727, 841 705/717/725/726). Or. No. 7701348226

R16/R20/R30, sun roof seal rear, for Renault R16, R20, R30. Or.Nr. 7700633963.

R16/R5, master brake cylinder sealing set (dual circuit brake system). For piston diameters

19,05mm. Suitable for Renault R5, R16, R12, Fuego.

• Suitable for this article
• 
  Brake cylinder paste. Manufacturer: FÖRCH. 5g brake cylinder paste for
  5,56 €

R16R15/R17, crankshaft bearing set. 0,25 oversize. Suitable for Renault R16, R15, R17. Renault

Alpine (4 cylinders), Fuego, R20, Trafic. Engines: 697/807/821/843. Reproduction from the EU.

R16R15/R17, crankshaft bearing set. Standard size. Suitable for Renault R16, R15, R17. Renault

Alpine (4 cylinders), Fuego, R20, Trafic. Engines: 697/807/821/843. diameter: 54,8mm, width: 20,50mm. Reproduction from the EU.

R16R15/R17, connecting rod bearing set. 0,25 oversize. Suitable for Renault R16, R15, R17. Renault

Alpine (4 cylinders), Fuego, R20, Trafic. Engines: 697/807/821/843. Reproduction from the EU.

R16R15/R17, connecting rod bearing set. Standard size. Suitable for Renault R16, R15, R17. Renault

Alpine (4 cylinders), Fuego, R20, Trafic. Engines: 697/807/821/843. Reproduction from the EU.

R17, foam material backrest for a front seat (3 parts). Suitable for Renault R17 + Alpine A310

R17, foam material seat face for a front seat (3 parts). Suitable for Renault R17 + Alpine A310

R17, coverings (2 x front seat, 1x rear seat). Suitable for Renault R17 TS. Material: Vinyl black

The coverings are without slots for the adjusting lever. This must be cut. Therefore it can be used for R17 with lateral and adjustment in the backrest.

R18/Feugo, brake power controller. Suitable for Renault 18, FUEGO (1.4+1,6). Brake system: Bosch

Bendix. Connections: 3/8x24 UNF + M12x1.

R20/30, exhaust, exhaust pipe before the final silencer. Suitable for Renault R20 petrol + R30

Diesel. Or. No. 7700683434

R20/R30/Alpine, clutch master cylinder sealing set 19mm. Suitable for Alpine starting from 01/1076

6, R20, R25, R30 all models.

R20/R30/Alpine, clutch taking cylinder sealing set 28,6mm. Suitable for Alpine starting from

01/1076, R20, R25, R30 all models.

R20/R30/R18, brake hose. Length: 401mm length. Thread: 1x female thread M10x1. 1x male thread M10x1.

R4, seal for the cover (shell) of the torsion bar mount, centred under the floor pan. Suitable for

Renault R4, R5, R6, Rodeo. Or. No. 770244008 + 0428245200

Radiator 2 version (original supplier) Renault R4 + R6. Installed of year of construction 1973 to

1986, with engines type Billancourt. The radiator fixed directly before the engine block. Deep 20mm, wide one 360mm, height of 245mm. The radiator is supplied without radiator caps. Please order it (82993)

• Suitable for this article
• 
  R4/R6, radiator hose down (exhaust radiator). Suitable for Renault R4 starting
  13,78 €
• 
  R4, Radiator hose above radiator. Suitable for Renault R4, starting from year
  18,64 €
• 
  Radiator cap with seal. Suitable for Renault R4, R5, R16, R12, rear engine
  6,84 €

R4, Radiator expansion tank for Renault R4. Flatten version

• Suitable for this article
• 
  Radiator hose universal. Inside diameter: 15,0mm. Outside diameter: 22,0mm
  15,38 €
• 
  Radiator cap expansion tank, green, 1,2 bar. Suitable for Renault R4 with
  5,86 €
• 
  Radiator cap expansion tank, brown, 1,4 bar. Suitable for Renault R4 with
  5,86 €

R4, collar steering gear (reproduction). Suitable for Renault R4, starting from year of

construction 06/1979. Renault R5, R6, R14. Mounting diameter: about 34 + 10mm.

Lockcylinder set (4 fittings), doors + luggage compartment. Suitable for Renault 4, 4L, R4, R4F4

R4F6, R6, R12, R15, R17. Reproduction

R4/4CV/Dauphine/R5, crankshaft thrust washer (axial clearance), 1 oversize 0,10mm. Dimension: Inner

diameter 44mm, outer diameter 55,6mm, 2mm thick. Suitable for Renault engine: 662, 680 702, 690, 839 706, 670, 800,B1B, 800 70. Capacity 603cc, 748cc, 782cc, 845cc. Suitable for Renault R4, 4CV, Dauphine, Dauphinoise, Juvaquatre, R5 (782cm³), Floride

R4/4CV/Dauphine/R5, crankshaft thrust washer (axial clearance), standard dimension. Dimension

Inner diameter 44mm, outer diameter 55,6mm, 1,9mm thick. Suitable for Renault engine: 662, 680 702, 690, 839 706, 670, 800,B1B, 800 70. Capacity 603cc, 748cc, 782cc, 845cc. Suitable for Renault R4, 4CV, Dauphine, Dauphinoise, Juvaquatre, R5 (782cm³), Floride

R4/4CV/Dauphine/R5, crankshaft bearing set (3 bearing, B = Billancourt). 1 oversize (+0,25). Wide

one: 1x 27,10mm, 1x 30,10mm, 1x 32,84mm. Crankshaft: 39,975 to 39,990mm. Suitable for Renault engine: 662, 680 702, 690, 839 706, 670, 800, B1B, 800 70. Engine capacity 603cc, 748cc, 782cc, 845cc. Suitable for Renault R4, 4CV, Dauphine, Dauphinoise, Juvaquatre, R5 (782cm³), Floride

R4/4CV/Dauphine/R5, crankshaft bearing set (3 bearing, B = Billancourt). 2 oversize (+0,50). Wide

one: 1x 27,10mm, 1x 30,10mm, 1x 32,84mm. Crankshaft: 39,975 to 39,990mm. Suitable for Renault engine: 662, 680 702, 690, 839 706, 670, 800, B1B, 800 70. Engine capacity 603cc, 748cc, 782cc, 845cc. Suitable for Renault R4, 4CV, Dauphine, Dauphinoise, Juvaquatre, R5 (782cm³), Floride

R4/4CV/Dauphine/R5, crankshaft bearing set (3 bearing, B = Billancourt). Standard dimension. Wide

one: 1x 27,10mm, 1x 30,10mm, 1x 32,84mm. Crankshaft: 39,975 to 39,990mm. Suitable for Renault engine: 662, 680 702, 690, 839 706, 670, 800, B1B, 800 70. Engine capacity 603cc, 748cc, 782cc, 845cc. Suitable for Renault R4, 4CV, Dauphine, Dauphinoise, Juvaquatre, R5 (782cm³), Floride

R4/4CV/Dauphine, connecting rod bearing (complete set). Dimension: Standard dimension. (41.128 to

41,138mm). Wide one: 21,16mm. Suitable for Renault engines: 662, 690, 680 702, 839 706, 670, 800 710, B1B. (603cc, 748cc, 782cc, 845cc). Installed from year of construction 1951 to 12/1985. Suitable for Renault R4, 4CV, Dauphine, Dauphinoise, Juvaquatre, R5 (782cm³), Floride, Estafette (747cm³). For piston rod pins: 38,00mm.