engine block for Sonstige-Citroen 203-403

Frost threaded plug. Diameter: 14,5mm. Suitable for Peugeot Diesel,. Citroen HY Diesel. Or. No

0234.06. This frost plug can be ground to 14,2mm. Then it also fits in Citroen DS, HY petrol, 11CV. Or No. (14,2mm cover) 457.069 + ZC9457069U.

Frost threaded plug. Diameter: 38mm. Suitable for Peugeot Diesel,. Citroen HY Diesel. Or. No

0233.06

Coolant drain plug on the engine block. Suitable for Peugeot 203, 403 + 404. The screw is supplied

with an O-ring. Or. No. 0156.05 + 0157.04

Engine sealing compound grey, to 340°, 85ml, silicone basis. Optimally for oil pans, valve cap

valve timing cover. Very good quality. Made in Germany.

• Suitable for this article
• 
  Scrapers professional version, to remove of labels on disks, engine sealing
  19,34 €
• 
  Scraper spare blades for 20484 (5 St)
  6,84 €

HYLOMAR engine sealing material, permanent elastic engine sealing, indispensable with engine

e overhaul, 80ml. Hylomar M is temperature resistant between -50°C and +250°C and can be applied for sealing sealing surfaces and threaded pieces.

Oil drain screw (engine, Peugeot gearbox, Peugeot rear axle). Thread: M18 x 1,5mm (interior

square). Suitable for Peugeot 203, 403, 404, 504, J7. Suitable for all engines. Renault R4. Citroen HY Diesel + AMI6 with M4 engine, AZAM6. Or. No. 0311.07 + 0311.04

• Suitable for this article
• 
  Special tool for the oil drain screw. Square 8 + 10mm. Suitable for Peugeot +
  10,81 €
• 
  Oil drain screw seal 18 x 24 x 2mm (for M18 thread). Suitable for Peugeot 203
  0,55 €

Oil drain screw magnetic (engine, Peugeot gearbox, Peugeot rear axle). Thread: M18 x 1,5mm

(interior square). Suitable for Peugeot 203, 403, 404, 504, J7. Suitable for all engines. Renault R4. Citroen HY Diesel + AMI6 with M4 engine, AZAM6

• Suitable for this article
• 
  Oil drain screw seal 18 x 24 x 2mm (for M18 thread). Suitable for Peugeot 203
  0,55 €

Oil drain screw magnetic (interior square 8x8). Thread: M16 x 1,5. Suitable for Peugeot 204, 304

404, 504, 604, 505, J5, J7, J9. Renault R5. Citroen CX, BX, ZX, C15. Or. No. 2221.11

• Suitable for this article
• 
  Gasket for oil drain plug for 2CV6, BX, XM, 204, 203, 304, 404, 504. inlet +
  0,48 €
• 
  Oil drain screw with valve. Thread M16 x 1,5. This valve is mounted instead of
  31,14 €
• 
  Hose (25cm) for the oil drain screw with valve (10636). Thread: M22 x 1,5.
  34,61 €
• 
  Special tool for the oil drain screw. Square 8 + 10mm. Suitable for Peugeot +
  10,81 €
• 
  Copper seal type A, (full copper). 16x22x1,5mm.
  0,48 €

Oil drain screw with valve. Thread M16 x 1,5. This valve is mounted instead of the original oil

drain screw. Simply remove protecting cap - tighten hose - then the valve opens. Protecting cap mount - valve closed. Everything without tool. No dirty and burned hands. No oil on the floor. 10637 is a neccesary item. And only 1 time mounting. That preserves the thread in the oil pan (those are often no longer supplyable). Completely manufactured in Germany! The thread M16 x 1.5 was Installed in: Citroen 2CV, DS, HY, 11CV, GS. Nearly all classical Peugeot (403, 404, 504, 304, 204)

• Suitable for this article
• 
  Gasket for oil drain plug for 2CV6, BX, XM, 204, 203, 304, 404, 504. inlet +
  0,48 €
• 
  Hose (25cm) for the oil drain screw with valve (10636). Thread: M22 x 1,5.
  34,61 €

Hose (25cm) for the oil drain screw with valve (10636). Thread: M22 x 1,5.

• Suitable for this article
• 
  Oil drain screw with valve. Thread M16 x 1,5. This valve is mounted instead of
  31,14 €

Oil drain screw without magnet (interior square 8x8). Thread: M16 x 1,5. Suitable for Peugeot 204

304, 404, 504, 604, 505, J5, J7, J9. Renault. Citroen CX, BX, ZX, C15. Or. No. 0163.93

• Suitable for this article
• 
  Gasket for oil drain plug for 2CV6, BX, XM, 204, 203, 304, 404, 504. inlet +
  0,48 €
• 
  Oil drain screw with valve. Thread M16 x 1,5. This valve is mounted instead of
  31,14 €
• 
  Hose (25cm) for the oil drain screw with valve (10636). Thread: M22 x 1,5.
  34,61 €
• 
  Special tool for the oil drain screw. Square 8 + 10mm. Suitable for Peugeot +
  10,81 €
• 
  Copper seal type A, (full copper). 16x22x1,5mm.
  0,48 €

Oil drain screw seal 18 x 24 x 2mm (for M18 thread). Suitable for Peugeot 203, 403, 404, 504, 505

J7 (all engines). Renault R4. Citroen HY. AMI6 with M4 engine. Oil cooler screwed joint 2CV with 16HP!

Gasket for oil drain plug for 2CV6, BX, XM, 204, 203, 304, 404, 504. inlet + exhaust screw

measure: 16,3x22x2mm. Version C, curved with a seal inside. (PTFE)

Oil pressure switch. Thread: M18 x 1,5. Suitable for Peugeot 203 + 403. Peugeot 104, 204, 304, 404

Citroen VISA. Response pressure: 0,6 bar. Or. No. 1131.04 . Due to the design, there is always a drop of oil at the electrical connection. Alternatively, the modern oil pressure switch 70733 can be installed.

• Suitable for this article
• 
  Oil pressure switch Peugeot. Suitable for Peugeot 104. 203, 204, 304, 305, 403
  12,79 €

P 203, camshaft drive chain, 62 chain links (duplex, double chain). Suitable for Peugeot 203. Or

No. 0816.04

P 203/403/404, camshaft drive chain, 64 chain links (duplex, double chain). Suitable for Peugeot

203, 403 + 404. Or. No. 0816.06

P 403, Gasket for the intermediate plate under the timing cover . Suitable for Peugeot 403. Or. No

0321.06

P 403, Gasket for timing cover. Suitable for Peugeot 403. Or. No. 0321.05

P 403, Oil pan gasket. Fits for Peugeot 403. Or. No. 0313.03

Camshaft drive chain tensioner. Suitable for Peugeot 403, 404, 504, 505, 604, J7, J9. Engines: XB2

XB5, U6, U8, XC5, XC7, XM7, XN1, KF5, KF6, XN1, XN2, XNA, XN6, SRI, XM, XM7, XN1P. Or. No. 0849.06

Cam follower (diameter: 23,98mm). Suitable for petrol engines: Peugeot 403, Peugeot 404, Peugeot

504, Peugeot J7. Diesel engines: Peugeot 404, Peugeot 504, Peugeot 505, Peugeot 604, Peugeot J7. Citroen HY. Or. No. 0942,13 + 7910031879. Please compare the dimensions!

Cam follower (diameter: 24,0mm). Length: 48mm. Suitable for petrol engines: Peugeot 203, Peugeot

403, Peugeot 404, Peugeot 504, Peugeot J7. Diesel engines: Peugeot 404, Peugeot 504, Peugeot J7. Citroen HY. Or. No. 0942.05. Please compare the dimensions!

Push rod for inlet + exhaust (6.5 x 242,5mm). Suitable for diesel engines: Peugeot 403D, Peugeot

404D, Peugeot 504D, Peugeot 505D, Peugeot J7D. Citroen HY CD. per piece. Or. No. 0940.08

Push rod inlet (6.75 x 185mm). Suitable for petrol engines: Peugeot 403, Peugeot 404, Peugeot 504

Peugeot 505, Peugeot J7. Or. No. 0939.03