for Sonstige-Citroen 404

P 404, air hose between carburettor + air filter (bent hose 180°, without additional connection)

Suitable for Peugeot 404.

P 404, suspension strut sleeve (bellows on the shock absorber). Suitable for Peugeot 404 (1

assembly, 90mm) up to the year of construction 1964! Or. No. 5254.02

P 404, clutch disk. Suitable for Peugeot 404 Cabrio + Coupe, starting from year of construction

1967. Dimension: 215 x 142 x 3,2mm. Hub profile: 29,4mmx24,5mm. 10 teeth.

engine bonnet Peugeot 404

Bonnet release cable for Peugeot 404, length: 1860mm, not suitable for Cabriolet + Coupe. Or.no

793716

Oil pump for Peugeot 404 1,8L. Or. No. 1001.29

cross member front at the bottom Peugeot 404 only Diesel!

P 404, front lower cross member. Suitable for Peugeot 404 with petrol engine (sedan, convertible

coupe, pick-up). Or. No. 7103.12

P 404, wheel suspension repair set in front (wishbones), per side. Suitable for Peugeot 404

Consisting of: Rubber block squarely with 24mm bore, 1x bush 29x32mm, 2x bush 16mm inside diameter - outside diameter 25 x 30mm - length 17mm, 1x bonded-rubber bushing 16mm inside diameter - outside diameter 34mm - length 41,5mm. The pin has 14mm diameter.

P 404, wheel suspension repair set in front, per side. Suitable for Peugeot 404. Consisting of: 1x

bush inside diameter 12 x 34mm - outside diameter 28 x 32mm. 2x bush inside diameter 16mm - outside diameter 25 x 30mm - length 17mm, 1x bush largely inside diameter 12 x 50mm - outside diameter 32 x 34mm. 2x pin 12mm diameter.

• Suitable for this article

P 404, wheel brake cylinders rear on the left. System Bendix. Piston diameter: 20,64mm. Connecting

thread: 3/8 x 24UNF. Mounting board bore: 35,7mm. Construction length: 70mm. Suitable for Peugeot 404, all models Saloon. Of year of construction 10/1967 to 05/1968. 404 all Thermostable Saloon, from 1966 to 10/1969. 404 models USA, starting from 1966. Or. No. 4402.22, Made in Europe.

• Suitable for this article
• 
  Brake cylinder paste. Manufacturer: FÖRCH. 5g brake cylinder paste for
  5,31 €

wheel brake cylinder rear right P404 original manufacturer 28,57mm piston, 3/8 x 24UNF connection

Made in Spain.

• Suitable for this article
• 
  Brake cylinder paste. Manufacturer: FÖRCH. 5g brake cylinder paste for
  5,31 €

P 404, wheel brake cylinders rear on the right. System Bendix. Piston diameter: 20,64mm. Connecting

thread: 3/8 x 24UNF. Mounting board bore: 35,7mm. Construction length: 70mm. Suitable for Peugeot 404, all models Saloon. Of year of construction 10/1967 to 05/1968. 404 all Thermostable Saloon, from 1966 to 10/1969. 404 models USA, starting from 1966. Or. No. 4402.23, Made in Europe.

• Suitable for this article
• 
  Brake cylinder paste. Manufacturer: FÖRCH. 5g brake cylinder paste for
  5,31 €

P 404, wheel brake cylinders in front (on the left + on the right are identically constructed)

Suitable for Peugeot 404, with Hydrovac brake assembly (thermostable). Piston diameter: 34,92mm. Overall length: 82mm. Brake line connector: 3/8 x 24 UNF. Distance of the fixing bolts: 44mm. With vent screw! Or. No. 4401.30. Made in France

• Suitable for this article
• 
  Brake cylinder paste. Manufacturer: FÖRCH. 5g brake cylinder paste for
  5,31 €

P 404, wheel brake cylinders in front (on the left + on the right are identically constructed)

Suitable for Peugeot 404, with Hydrovac brake assembly (thermostable). Piston diameter: 34,92mm. Overall length: 82mm. Brake line connector: 3/8 x 24 UNF. Distance of the fixing bolts: 44mm. Without vent screw! Made in France

• Suitable for this article
• 
  Brake cylinder paste. Manufacturer: FÖRCH. 5g brake cylinder paste for
  5,31 €

repair set main brake cylinder Peugeot 404 Thermostable 1 circle brake system with 1,25 inch, 31,75

mm piston

• Suitable for this article
• 
  Brake cylinder paste. Manufacturer: FÖRCH. 5g brake cylinder paste for
  5,31 €

P 404, repair set for the steering gear. Suitable for Peugeot 404.

P 404, rear light seal. Suitable for Peugeot 404 saloon. For all years of construction. Or. No

6344.32

P 404, taillight cap red. Suitable for Peugeot 404 Cabriolet + 404 Coupe. Version: Carello.

• Suitable for this article
• 
  P 404, turn signal cap rear. Suitable for Peugeot 404 Cabriolet + 404 Coupe
  42,83 €

P 404, set (13x) spring washers "Belleville" in the steering gear, for the left tie rod. Suitable

for Peugeot 404. Or. No. 3839.02

P 404, shift linkage repair set (at the gearbox). Suitable for Peugrot 404, starting from year of

construction 11/1967.

P 404, shift linkage repair set (for the shift linkage at the steering column). Suitable for

Peugeot 404, starting from year of construction 10/1967.

P 404, shift linkage repair set, for the steering columm gear shift change. Suitable for Peugeot

404, to year of construction 1967.

P 404, foam material (seat face) for seat in front on the left. Suitable for Peugeot 404 sedan +

BREAK.

P 404, foam material (seat face) for seat in front on the right. Suitable for Peugeot 404 sedan +

BREAK.

P 404, striker plate on the right. Suitable for Peugeot 404. High-quality reproduction made of

metal. Or. No. 9165.21

Striker plate door on the left, Peugeot 404. Reproduction

Striker plate door on the right, Peugeot 404. Reproduction

P 404, screw securement drum Peugeot 404. Or.Nr. 690536

P 404, screw front wheel suspension Peugeot 404. M12x89.

P 404, inside box sills on the left. Suitable for Peugeot 404 Cabriolet. Made in European Union.

P 404, inside box sills on the right. Suitable for Peugeot 404 Cabriolet. Made in European Union.

P 404, box sills - reinforcement. The reinforcement fits on the left + on the right. Per piece

Suitable for Peugeot 404 Cabriolet. Made in European Union.

P 404, box sill external sheet metal on the left. Suitable for Peugeot 404 Cabriolet. Made in

European Union.

P 404, box sill external sheet metal on the right. Suitable for Peugeot 404 Cabriolet. Made in

European Union.

P 404, sill panel left (not the panelling of the sill), with all beads and indentations. Suitable

for Peugeot 404 saloon. Good reproduction of the original.

P 404, sill panel right (not the panelling of the sill), with all beads and indentations. Suitable

for Peugeot 404 saloon. Good reproduction of the original.

P 404, bonded-rubber bushing mounting strut arm front axle, Peugeot 404. Measurements: 12 x 25 x 35

x 38. Or. No. 524802

P 404, bonded-rubber bushing A-arm. Suitable for Peugeot 404. Inside diameter: 12mm. Outside

diameter: 32mm. Length inside: 50mm. Length outside: 34mm. Or. No. 3561.04

P 404, bonded-rubber bushing for the wishbone. Suitable for Peugeot 404. Inside diameter: 12mm

Outside diameter: 28mm. Length inside: 38mm. Length outside: 32mm. Or. No. 3523.09

P 404, silent block stabiliser front. Suitable for Peugeot 404. Inner diameter 14mm. Outer diameter

27mm. Or. No.5088.02

P 404, bonded-rubber bushing gear rack end at the steering gear, for the mounting of the tie rod

Peugeot 404. 12x30x30x24mm

P 404, shaft seal differential. Dimension: 25 x 45 x 8mm. Suitable for Peugeot 404.

P 404, coverings (2x seat in front, 1x seat bench rear). Color: Vinyl beige. Suitable for Peugeot

404 sedan.

P 404, coverings (2x seat in front, 1x seat bench rear). Color: Leather light brown (cognac)

Suitable for Peugeot 404 sedan (berline).

P 404, coverings (2x seat in front, 1x seat bench rear). Color: Leather black (noir). Suitable for

Peugeot 404 sedan (berline).

P 404, coverings (2x seat in front, 1x seat bench rear). Color: material red (Velvet). Suitable for

Peugeot 404 sedan.

P 404, Sun visor set (2 pieces) Peugeot 404. 2 coloured. 1 side grey. 1 side black

Sun visor set for Peugeot 404, 2 pieces, beige

Tension belt for Peugeot 404 folding top, made of "Sonnenlandstoff), cushioned, 2 pieces