CX 20/22, radiator hose heating to the vapour bubble separator (ball on the heater). Suitable for
Citroen CX Athena, 20 + 22. inner diameter 18.0mm + 21.0mm. Or. No. 75522000 + 96015787
heating and ventilation for Sonstige-Citroen Alle
51 Articles | Page 1 of 2
CX 20/22, radiator hose from the T-connector to the heating radiator (heat exchanger). Suitable for
Citroen CX 20 + 22. or. no. 75522001
CX, radiator hose for the heat exchanger (heating), on the left on the crossing fitting. Suitable
for Citroen CX, of year of construction 1975 to 1978. Or. No. 5475883.
CX, radiator hose for the heat exchanger, on the left. Suitable for Citroen CX 20 + CX 22, starting
from year of construction 1983. Or. No. 75531418
CX, radiator hose for the heat exchanger (heating). Suitable for Citroen CX, of year of
construction 1975 to 1978. Or. No. 5475945.
CX, Radiator hose H-piece to the heat exchanger. Suitable for Citroen CX up to year of construction
05/1978. Or. No. 5475946
CX, radiator hose above, for the heat exchanger. Suitable for Citroen CX, of year of construction
1975 to 1978. Or. No. 5444910
CX, radiator hose on the right, for the heat exchanger (heating). Suitable for Citroen CX 20 +
CX22, starting from year of construction 1983. Or. No. 75518744
CX, radiator hose down, for the heat exchanger (heating). Suitable for Citroen CX, of year of
construction 1975 to 1978. Or. No. 5444909
CX, radiator hose between T-connector and the heating radiator (heat exchanger). Suitable for
Citroen CX 25IE, CX TD. The hose can also be used for other CX (20/22), but then it must be shortened. Inner diameter 15.0mm + 17.0mm. Or. No. 75518745
Heater valve plastic housing (screwed on the heat exchanger). For the repair of the heating flow
control valve. Suitable for Citroen DS, GS Birotor, Peugeot 204/304
Heater valve, complete with spiral. Suitable for Citroen DS, starting from year of construction
09/1968. GS Birotor. The heater valve is a new part. Or. No. DX642-226A
J5/C25. Heater radiator (heat exchanger) suitable for Peugeot J5 + Citroen C25. Installed from year
of construction 10/1985 to 03/1994. Length: 243mm. Wide one: 177mm. Deep 42mm.
Cable tie made of rubber, for 2CV/DS, like the original. Length: 270mm, breadth:12mm. Made in
Germany. Now manufactured from improved material (NBR/SBR fabric rubber)
Cable tie made of rubber, for 2CV/DS, like the original. Length: 320mm, breadth: 12mm. Made in
Germany. Now manufactured from improved material (NBR/SBR fabric rubber)
Rocker switch for the heater blower (1 speed). 33x5x19.5mm (installation dimension). Suitable for
many Renault and Peugeot models.
Radiator Fin Straightener. Designed for straightening fins and removing debris from vehicles
radiators and air conditioning condensers. One tool with 6 different combs works on any vent or grill. The use of this tool allows the radiator or air conditioning grill to work correctly. Also use on air conditioning grills. Also suitable for oil and water radiators/condensers and evaporators
Collars clip strap with lock (made from metal). Overall length: about 500mm. Width: 5,0mm. These
universal clip straps were in former times Installed at many French car´s. So also at radiator hoses, collar drive shafts etc.
Tube bending sleeve. Suitable for hose outer diameter of 12,5 > 13,4mm. Length: 60mm. With this you
can easily produce bent water hoses. Simple and ingenious!
Tube bending sleeve. Suitable for hose outer diameter of 14,6 > 16,4mm. Length: 65mm. With this you
can easily produce bent water hoses. Simple and ingenious!
Tube bending sleeve. Suitable for hose outer diameter of 16,5 > 18,4mm. Length: 70mm. With this you
can easily produce bent water hoses. Simple and ingenious!
Tube bending sleeve. Suitable for hose outer diameter of 18,8 > 21mm. Length: 75mm. With this you
can easily produce bent water hoses. Simple and ingenious!
Tube bending sleeve. Suitable for hose outer diameter of 21,8 > 24mm. Length: 90mm. With this you
can easily produce bent water hoses. Simple and ingenious!
Hose clamp 11-17mm, especially for radiator hose. Vintage look. Embossed band with raised edges
This prevents the hose from being damaged. Small screw housing with 7mm hexagon head screw (with slot). Normal, modern hose clamps squeeze the hose. This is completely avoided with these clamps. And they even look better.
Hose clamp 13-20mm, especially for radiator hose. Vintage look. Embossed band with raised edges
This prevents the hose from being damaged. Small screw housing with 7mm hexagon head screw (with slot). Normal, modern hose clamps squeeze the hose. This is completely avoided with these clamps. And they even look better.
Hose clamp 15-24mm, especially for radiator hose. Vintage look. Embossed band with raised edges
This prevents the hose from being damaged. Small screw housing with 7mm hexagon head screw (with slot). Normal, modern hose clamps squeeze the hose. This is completely avoided with these clamps. And they even look better.
Hose clamp 19-28mm, especially for radiator hose. Vintage look. Embossed band with raised edges
This prevents the hose from being damaged. Small screw housing with 7mm hexagon head screw (with slot). Normal, modern hose clamps squeeze the hose. This is completely avoided with these clamps. And they even look better.
Hose clamp 22-32mm, especially for radiator hose. Vintage look. Embossed band with raised edges
This prevents the hose from being damaged. Small screw housing with 7mm hexagon head screw (with slot). Normal, modern hose clamps squeeze the hose. This is completely avoided with these clamps. And they even look better.
Hose clamp 26-38mm, especially for radiator hose. Vintage look. Embossed band with raised edges
This prevents the hose from being damaged. Small screw housing with 7mm hexagon head screw (with slot). Normal, modern hose clamps squeeze the hose. This is completely avoided with these clamps. And they even look better.
Hose clamp 32-44mm, especially for radiator hose. Vintage look. Embossed band with raised edges
This prevents the hose from being damaged. Small screw housing with 7mm hexagon head screw (with slot). Normal, modern hose clamps squeeze the hose. This is completely avoided with these clamps. And they even look better.
Hose clamp 38-50mm, especially for radiator hose. Vintage look. Embossed band with raised edges
This prevents the hose from being damaged. Small screw housing with 7mm hexagon head screw (with slot). Normal, modern hose clamps squeeze the hose. This is completely avoided with these clamps. And they even look better.
Hose clamp 40-56mm, especially for radiator hose. Vintage look. Embossed band with raised edges
This prevents the hose from being damaged. Small screw housing with 7mm hexagon head screw (with slot). Normal, modern hose clamps squeeze the hose. This is completely avoided with these clamps. And they even look better.
Hose clamp 50-65mm, especially for radiator hose. Vintage look. Embossed band with raised edges
This prevents the hose from being damaged. Small screw housing with 7mm hexagon head screw (with slot). Normal, modern hose clamps squeeze the hose. This is completely avoided with these clamps. And they even look better.
Hose clamp 57-75mm, especially for radiator hose. Vintage look. Embossed band with raised edges
This prevents the hose from being damaged. Small screw housing with 7mm hexagon head screw (with slot). Normal, modern hose clamps squeeze the hose. This is completely avoided with these clamps. And they even look better.
51 Articles | Page 1 of 2
Select your Citroen 
Please select your Peugeot 
Please select your Citroen Renault 
