for Sonstige-Citroen BX

door contact switch Citroën CX, GS, XM, BX VISA, DS, Peugeot 504

Transfer pump metal version, inclusive 2 hoses for drawing in and running off, 500ccm. Applicable

e for: Diesel, fuel oil, coolant, brake fluid.

Sealing paper set with and without metallic carrier! to produce own seals ! Size DINA4. Original

REINZ".

• Suitable for this article
• 
  Engine sealing compound grey, to 340°, 85ml, silicone basis. Optimally for oil
  5,15 €
• 
  Scrapers professional version, to remove of labels on disks, engine sealing
  19,34 €
• 
  Universal Thread Gauge - 4pc. For individual gauges measuring pith and thread
  17,76 €
• 
  Scraper spare blades for 20484 (5 St)
  6,84 €
• 
  Drilling tool set in the wood stand. Equipped with ever drilling tools a 2mm
  54,44 €

Universal spray WD40, rust remover corrosion protection, with water resistant characteristics

contact spray. 400ml.

Underbody coating nozzle (gun) + cavity preservation nozzle (gun), for 1 liter of doses, very high

quality.

• Suitable for this article
• 
  Cavity preservation on wax basis, for cavity pistol, 1 litre.
  20,73 €
• 
  Underbody coating + stone guard to squirt, for underbody protection pistol
  10,81 €
• 
  stone guard MOTIP, colour grey for spray gun, 1000ml
  16,76 €

Underbody coating + stone guard to squirt, for underbody protection pistol. 1000ml

• Suitable for this article
• 
  Underbody coating nozzle (gun) + cavity preservation nozzle (gun), for 1 liter
  26,68 €

Underbody coating to paint with brush, 1000ml

USB A+C adapter (12 volt) for cigarette lighter. The adapter has 2 connections. 1x USB-A (the large

wide plug) and 1x UBB-C (the new small plugs).

Valve (rubber valve) for rim. Suitable for Citroen 2CV, DS, CX, HY, GS. Renault R4, R5, R6, R8

R10, rear engine. Peugeot 203, 403, 404, 504, 604, 204, 304, J7. For valve hole: 11,3mm. Length: 42,5mm.

Valve long (rubber valve) for rim. To uses this long valve, if the rim has a large wheel cover

(with cutout for the valve). Suitable for Citroen DS, CX, HY, GS. Renault R4, R5, R6, R8, R10, rear engine. Peugeot 203, 403, 404, 504, 604, 204, 304, J7. For valve hole: 11,3mm. Length: 61,5mm.

Valve extractor + lifter (tire valve)

Valve cover gasket Diesel. For engine XUD7. Suitable for Citroen VISA, BX, ZX, Xantia, C25. Peugeot

205 D, 305II D, 405 D, etc. Or. No. 0249.46

Valve grinder suction cup. 1x 16+21mm

Valve grinder suction cup. 1x 28+34mm

Valve grinding-in paste (engine valves in the cylinder head), 100ml box. The double box contains

pre-grinding paste (rough) and regrinding paste (fine).

• Suitable for this article

Valve clearance gauge. 0,05 > 1,00mm. Precision - feeler gage with conical lamellas

universal valve spring cpmpressor, for the development of the valves + valve springs.

Valve caps for the tire. With Citroen Logo. Set = 4 fittings!

First aid kit Compact, according to DIN 13164. Length: 215mm. Wide one: 55mm. Amount: 130mm

Original LEINA!

Carburettor jet cleaning tool. Essential for carburettor maintenance and cleaning in your classic

car. The scope of delivery includes five stainless steel nylon brushes with diameters of 2, 3, 4, 5 and 7 mm and a brush length of 30 mm. Ten stainless steel cleaning needles with diameters of 0.7, 0.9, 1.1, 1.3 and 1.4 mm. A 4 mm Allen key and twelve round carbon steel files with diameters of 0.4, 0.5, 0.6, 0.7, 0.8, 0.9, 1.0, 1.1, 1.2, 1.3, 1.4 and 1.6 mm. A flat file is also included.

End cap rubber. 10mm inside diameter. E.G., for plugging water pumps or heater radiator connections.

End cap rubber. 12mm inside diameter. E.G., for plugging water pumps or heater radiator connections.

• Suitable for this article
• 
  hose clamp for 15-20mm.
  0,93 €

End cap rubber. 14mm inside diameter. E.G., for plugging water pumps or heater radiator connections.

• Suitable for this article
• 
  hose clamp for 15-20mm.
  0,93 €

End cap rubber. 16mm inside diameter. E.G., for plugging water pumps or heater radiator connections.

End cap rubber. 18mm inside diameter. E.G., for plugging water pumps or heater radiator connections.

End cap rubber. 21mm inside diameter. E.G., for plugging water pumps or heater radiator connections.

End cap rubber. 23mm inside diameter. E.G., for plugging water pumps or heater radiator connections.

End cap rubber. 26mm inside diameter. E.G., for plugging water pumps or heater radiator connections.

End cap rubber. 8mm inside diameter. E.G., for plugging water pumps or heater radiator connections.

Hazard warning lights switch 12 Volt! Manufacturer Bosch! The hazard flasher system uses the

existing flasher relay and is relatively easy to install. Attention: a suitable bulb must be ordered separately. Our article number 14425.

• Suitable for this article

Water hose screen wiping water, PVC clear. Inside diameter: 3mm, outside diameter: 5mm. Operating

g pressure maximum 7.5 bar. By meters. Custom cut, return not possible!

• Suitable for this article
• 
  T-connector fuel pipe, 3mm, also suitable for the screen wash.
  2,13 €

Water hose screen wiping water, PVC clear. Inside diameter: 4mm, outside diameter: 6mm. Operating

g pressure maximum 6,0 bar. By meters. Custom cut, return not possible!

• Suitable for this article
• 
  T-connector fuel pipe, 4mm, also suitable for screen wash.
  2,18 €
• 
  Wiper nozzle synthetic grey. Universal fitting. 4mm hose connection. The wiper
  9,82 €
• 
  Windscreen washer nozzle black. Universal fitting. 4mm hose connection. The
  4,86 €

Water hose screen wiping water, PVC clear. Inside diameter: 5mm, outside diameter: 7mm. Operating

pressure maximaum 7.0 bar. By meters. Custom cut, return not possible!

• Suitable for this article
• 
  T-connector for fuel pipe, 5mm, also suitable for the screen wash.
  2,18 €

Self-adhesive trim. Width: 12mm. Length: 10 metres.

Zinc primer, 400ml.

Flexible Spark Plug Remover/Installer. This specially designed tool allows access to spark plugs

where they are deep seated or require off-line access. The tool is also designed to grip the spark plug securely allowing the removal with ease.

Tap drill M14x1,25. (Spark plug threads).

• Suitable for this article

Heli coil spark plug thread repair set. For all M14 spark plugs. Contents: 1 bore + cutting tool

installation spindle. 10x heli coil insert M14x1,25x17,5. (Spark plugs with long threads). 10x heli coil insert M14x1,25x12,7. (Spark plugs with short threads, 2CV, R4).

Spark plug thread Helicoil insert. M14x1,25x12,7 (spark plugs with short thread 2CV, R4). Refill

package (10 pieces)!

Spark plug wrench (tube wrench), for 20.8 mm spark plugs. 300mm long! Particularly for Citroen DS

Peugeot 203, 403, 404, 504. Workshop quality!

Spark plugs plug 90° bent.

Ignition module of 3+2 connections. Used with Citroen BX, AX, C15, ZX. Peugeot 205, 305, 309, 505

605

Ignition module 7 pin. Used with BX, AX, CX, VISA, C15, ZX, C25. Peugeot 104, 205, 305, 309, 504

505, J5.

Spark Indicator. This non-contact spark tester will test for the presence of power in spark plugs

coils and distributors. Simply place the grooved end over the spark plug wire with the engine running and the high intensy bulb will flash indicating spark. Note: Depending upon screen of the ignition cables, it can be possible, that you see the flashing by daylight, very bad!

Brake cylinder hone. For use with a cordless drill to clean brake cylinders during service

22-69mm. For honing out brake cylinders. For use with a standard drill.

• Suitable for this article
• 
  Hone segment 30x4mm (2 fittings) for brake cylinder hone 20916.
  9,27 €

Engine cylinder hone. Enables the inside surface of the cylinders to be cleaned of carbon deposits

etc. Suitable for all cylinders with a bore diameter of 50

• Suitable for this article
• 
  Hone segment 100x10mm (3 fittings) for engine cylinder hone 20918.
  20,81 €

Cylinder head screw. Thread: M11 x 1,5. Length: 175mm. Suitable for Peugeot 205, 504, 505. Citroen

C25 + BX. Or. No. 0204.57