for Sonstige-Citroen CX

Rubber cap for the connection to the starter motor. (Protecting cap). This cap should never be

missing. Universal fitting! For max. cable diameters: 17,8mm. Inside diameter 22mm.

Rubber cap for the connection at the generator. (Protecting cap). This cap should never be missing

Universal fitting! For max. cable diameters: 7,62mm. Inside diameter 12,7mm.

Elastic strap with 2 hook loops, length 112 mm (measured from hook to hook). Length including

hooks: 160 mm. This elastic strap is suitable for a wide range of uses. We've been looking for something like this for ages. For example, for securing radiator expansion tanks, air filters, jacks, securing items in the boot, and so on.

H7 bulb clearly, 12 Volt.

Hook set, 135 mm long. 4 pieces, ideal for removing O-rings, seals, Citroën brake line seals, etc

Contents: 1x straight tip, 1x 90° tip, 1x hook tip, 1x piercing tool.

Retaining clip emblems for Citroen, Renault, Peugeot, old models. 2.5mm inner diameter (i.e. for

2.5mm pins on the emblems). Length: 7.5mm. Per piece

Fixture for angular switches (for mounting under the dashboard). Suitable for switch with 36x18mm

installation hole.

Retaining clip for the seal from the luggage compartment lid. Suitable for Citroen 11CV/15CV

Citroen DS. Dimension: 10 x 14mm. Also suitable for other French vehicles. Or. No. 802698, DM453-120C

handbrake, brake pads Citroën CX, all models, >,74

Handbrake cable CX 74-80 left,1190mm 5490304

4

Handbrake cable CX 74-80 right1385mm 5490303

3

Handbrake cable CX 80> left 1200mm95492972

2

Handbrake cable, CX 80> right,1400mm 95492971

71

Handhold for lacquer aerosol spray. Facilitates exactly and controlled alloting of the spray. A

real alleviation.

szction pump (hand pump) for eG fuel, hydraulic liquid

Hand washing cream, 500ml

Hardener AK 210, 1 litre, for lacquers. Weight ratio 2 parts lacquer, 1 part hardener. Not for

metallic lacquers!!!!

hardener for filler, tube 25g.

Heater cooler Citroen CX all models, measure: 172x194x42mm

m

Heli coil application M7. Length: 10,5mm (Thread repair)

Heli coil application M7. Length: 14,0mm (Thread repair)

Heli coil application M7. Length: 7,0mm (Thread repair)

Thread Repair Kit M7x1, for repairing damaged threads. For plating threads in materials with low

shearing strength 1 twist drill, 1 tap, 1 installation tool, 1 tang breaker, 25 x M7x1 coil.

Helicoil repair set for M7. Consisting of: Twist drill (to M12), hand taps from HSS, mounting

spindle, insertion pin breaker (to M12). In each case, 10 theaded inserts M7 in the lengths: 7,0mm, 10,5mm, 14,0mm. Original Helicoil, no reproduction.

Inside roof lining adhesive from Teroson. Contents: 680g. Light, transparent adhesive material for

the roof and door linings.

Roll Pin Assortment, 450 pcs. Diameter from 2 > 10mm, lenght 5>50mm.

Cavity preservation on wax basis, for cavity pistol, 1 litre.

• Suitable for this article
• 
  Underbody coating nozzle (gun) + cavity preservation nozzle (gun), for 1 liter
  26,68 €

Body cavity protection spray, 500 ml. Inclusive hollow space probe

• Suitable for this article

Cavity probe (60cm) for fluid film spray can (21127)

Hone segment 100x10mm (3 fittings) for engine cylinder hone 20918.

Hone segment 30x4mm (2 fittings) for brake cylinder hone 20916.

Horn (12 V), completely with air compressor + 2 x compressed air horn, relay and air hoses. 750 +

800Hz (2 different tones). 115dB (A). Length of the air horns: 210 + 165mm. Length of the air compressor: about 105mm.

Horn (trumpet) 12 V, high tone. 480Hz, 108dB (A). Very high quality horn, made in the European

Union. The horn is made of metal, with a red cover (trumpet) from plastic! Universal fitting. Diameter: about 110mm. ECE checked.

Horn (trumpet) 12 V, deep tone. 420Hz, 108dB (A). Very high-quality horn, made in the European

Union. The horn is made of metal, with a red cover (trumpet) from red synthetic! Universal fitting. Diameter: about 110mm. ECE checked.

Horn, 12V. Universal fitting.

Horn 12 V, high tone. 430Hz, 114dB (A). Very high quality horn, made in the European Union. The

horn is from the front in red painted! Universal fitting. Diameter: about 91mm. Metal housing. ECE checked.

Horn 12 V, deep tone. 340Hz, 114dB (A). Very high quality horn, made in the European Union. The

horn is from the front in red painted! Universal fitting. Diameter: about 91mm. Metal housing. ECE checked.

Horn, 12Volt. Universal fitting. Diameter 100mm! The horn is chromium-plated.

Horn set (2 pieces) chrom-plated, from Bosch. Frequencies: 325 and 400 Hertz. Volume: 118 db(A)

operating voltage: 12 V, power consumption: 48 W each, diameter: 156 mm, depth: 91 mm, EMV protection: included. Universal fitting.

Hydraulic + brake pipe handle made of metal. The fixture has a rubber lining and is to attach

Suitable for 4,5mm line.

Hydraulic + brake pipe handle made of metal. The fixture has a rubber lining and is to attach

Suitable for 6,35mm line.

Hydraulic + brake pipe handle made of metal. The fixture has a rubber lining and is to attach

Suitable for 8,0mm line.

Hydraulic + brake pipe handle to attach, from synthetic. Suitable for 3,75mm line.

Hydraulic + brake pipe handle to attach, from synthetic. Suitable for 4,5mm line.

Hydraulic + brake pipe handle to attach, from synthetic. Suitable for 6,35mm line.

Hydraulic pressure regulator fixing stud bolt. Suitable for Citroen DS with manual gearbox +

Citroen CX with manual gearbox: Dimension stud bolt: M7 thread. Total length: 90mm. Thread length 1x 65mm + 1x 15mm. Or. No. 5420597

Hydraulic fluid return pipe (leakage oil line). Material: Rilsan. Dimension: 2x4mm. Suitable for

Citroen DS. By meters. Customer cut - return not possible!

• Suitable for this article
• 
  3 path link (connector), for pressure-free return (the return hoses are only
  4,37 €
• 
  Hydraulic fluid return pipe (leakage oil line). Material: Rilsan. Dimension
  4,37 €
• 
  Hydraulic fluid return pipe, 90° bow. Connection diameter: 7,0mm + 15,0mm
  17,76 €
• 
  Return pipe 4 way connector, from plastic (for hydraulic fluid). Suitable for
  19,73 €

Brake hose seal + hydraulic line seal (socket) green. For LHM (hydraulic fluid green), 4,5mm line

(connector 9mm). Suitable for Citroen DS, HY with hydraulics, GS, CX etc.

Hydraulic line + brake hose seal (socket) green. For LHM (green hydraulic fluid), 4,5mm line

(connector 9mm). Very good reproduction. Suitable for Citroen DS, HY with hydraulic, GS, CX etc.

Hydraulic lines for CX Break, Prestige,09.76-90, stainless steel, 5 lines in to