for Sonstige-Citroen DS
Repair manual, for Citroen ID 19. Edition 1968. For vehicles starting from year of construction
1966. 274 sides. Reproduction. Language: German.
Spare wheel - front cross member: Cover (2 small rectangles) against vibration! These small
l insulating pieces are glued to the cross member. The spare wheel is supported on them. Colour: dark grey. Suitable for Citroen DS, from year of construction 1967.
Spare wheel - front cross member: Cover (2 small rectangles) against vibration! These small
insulating pieces are glued to the cross member. The spare wheel is supported on them. Colour: light grey. Suitable for Citroen DS, up to year of construction 1967.
Spare wheel fixture strap from cotton (830mm + 500mm). Suitable for Citroen DS, starting from year
of construction 1967 (new front). For 180/185 tire.
Spare wheel fixture strap (830mm + 550mm) from cotton. Suitable for Citroen DS, to year of
construction 1965 (tyre 165/400)
Spare wheel fixture - crossbeam in front, between the fenders. Suitable for Citroen DS, new front
(starting from year of construction 1969). Or. No. DX622-97A. Made in Germany.
Spare wheel fixture - crossbeam in front, between the fenders. Suitable for Citroen DS, of year of
construction 1962 to 1967. Or. No. DX622-97.
Belt pulley in front, suitable for Citroen DS, starting from year of construction 1965. It is a
used belt pulley, which is sandblast and painted. It is again balanced. Internal teeth are not painted. Or.Nr. 2D5414407A
Ring seal under that bearing block from the inlet rocker arm shaft. Suitable for Citroen DS +
Citroen HY. Dimension: Measurements: 8.9 x 14.3 x 2,7mm. Made in Germany.
Roller bearing in front, for the gear shaft. 4/5 gear. Suitable for Citroen DS, with 5 gear
gearbox. Dimension: 41x80x18mm. Or. No. ZC9620335U
Rosette 13/5mm with screw. Contents: 12 pieces + 12x screw 4mm/16mm. This rosette consists only of
a punched-out sheet metal which has been nickel-plated. They are not as sturdy and pretty as our numbers 21143, 21144, 21145, but these rosettes are more like the original rosettes used in early Citroen 2CV, R4, Dauphine etc. Higher-quality vehicles were more likely to have our shiny alternatives (e.g. Citroen DS).
Rosette nickel plated. For 4mm screw. Outside diameter: 11mm. Height: 2,4mm. These rosettes were
used for dashboard, door linings. Suitable for Citroen 2CV, DS, HY and in many Peugeot + Renault. Our rosettes are shiny and flanged at the back. This makes them very stable.
Rosette nickel plated. For 4mm screw. Outside diameter: 12,7mm. Height: 2,5mm. These rosettes were
used for dashboard, door linings. Suitable for Citroen 2CV, DS, HY and in many Peugeot + Renault. Our rosettes are shiny and flanged at the back. This makes them very stable.
Rosette nickel plated. For 5mm screw. Outside diameter: 13mm. Height: 3,0mm. These rosettes were
e used for dashboard, door linings. Suitable for Citroen 2CV, DS, HY and in many Peugeot + Renault. Our rosettes are shiny and flanged at the back. This makes them very stable.
Rust eraser pen. Ideal for removing even the smallest rust spots. Indispensable! And, of course
the cleaned rust spot must then be preserved with paint immediately.
Reversing lamp "Gelbon". Suitable for Citroen DS, starting from year of construction 1973. Per
piece. Without fixture.
Back-up light reproduction (Hella), the housing is made of plastic. Width 120mm, height of 70mm
The headlamp is for a later mounting underneath the bumper! It cannot be used as substitute for the original backup lights from R4! Lampholder for the bulb: Ba15s. Maximum 21Watt. (Our number 14035 + 14045).
Reversing lamp, version Cibie. Suitable for Citroen DS. Case: Synthetic grey. Without metal
fixture. Dimension: about 60 x 120mm. Per piece.
Return pipe (connecting tube) from the right front suspension cylinder, to the hose connector (in
the middle of the car). Suitable for Citroen DS. Or. No. DS391-178A
Return pipe for hydraulic fluid LHM. Inside diameter: 5mm. Outside diameter: 11mm. By meters
Suitable for Citroen DS, starting from year of construction 1965. Or. No. DVN394-71
Return pipe for hydraulic fluid LHM. Inside diameter: 7,0mm. Outside diameter: 14,0mm. By meters
Suitable for Citroen DS. Or. No. DXN394-146
Return line curved, front. Connection to the pressure regulator. Suitable for Citroen DS with
carburettor engine + manual gearbox (bvm). Connections: 9.0 + 10.0mm. Length: 285mm. Or. No. 3D 5417 668W
Return pipe curved, in front. Connection to the pressure controller. Suitable for Citroen DS with
carburetor engine and manual gearbox (no injection engine, no semi-automatic transmission). Connections: 8,0 + 10,0mm. Length: 285mm. Or. No. 5D5417662F
Return hose for LHM + LHS hydraulic fluid. Dimension: 11 x 18mm. Or. No. DXN394-72. Made in Germany
by Continental, tested and approved by Der Franzose. Tailored to customer's needs - thus, return not possible!
Return hose LHM, 3x8mm (for hydraulic fluid). Suitable for Citroen DS. Or. No. DXN394-157. By
meters. Customer cut - return not possible!
Return hose LHS, 3x8mm (for hydraulic fluid). Suitable for Citroen DS. Or. No. DM453-107. By
meters. Customer cut - return not possible!
Return hose LHS, 5x11mm (for hydraulic fluid). Suitable for Citroen DS. Or. No. DS453-163. By
meters. Customer cut - return not possible!
Return hose LHS, 7x14mm (for hydraulic fluid). Suitable for Citroen DS. Or. No. DS391-112. By
meters. Customer cut - return not possible!
Return stop (valve) for fuel or windscreen washer fluid. Connection: 6 mm. This valve is a real
improvement for classic vehicles that use a hand pump without a ball valve to deliver water. This ensures that windscreen washer fluid is always available at the spray nozzles. Please note the direction of flow during installation! It also prevents petrol from flowing back in the fuel line (useful for longer periods of inactivity). Please install this valve close to the petrol pump (between the petrol pump and the tank).
Tail lamp and/or stop light round, original Seima 3054. 3055. (no reproduction, with test symbol
E") 1 thread light, only brake or taillight! With metal base + support! The glass has 68,5mm diameter! Used in HY, AZU, DS - in many Renault + Peugeot models as well!
