for Sonstige-Citroen DS

Tie rod inside, tie rod adjusting sleeve (connection from the tie rod to the tie rod end). Suitable

for Citroen DS.

Left track rod. Suitable for Citroen DS, starting from year of construction 1965. Or. No. 9D5409796F

Right track rod. Suitable for Citroen DS, starting from year of construction 1965. Or. No. 9D5409797

Tie rod bonded-rubber bushing, inside. Suitable for Citroen DS. Per piece. Dimension: 10 x 22 x

33mm.

Tie rods + tie rod end separator. Suitable for Citroen 2CV, DS, 11CV, 15CV. Renault R4, R5. Peugeot

404 etc. clamping range 16-18mm. Opening 19mm!

Tie rods adjusting sleeves special! Suitable for Citroen 2CV + DS. It is an improved version with a

hexagonal. Scope of delivery: 2x adjusting sleeve + 4x counter nut! Note: Note: The adjusting sleeves have 1x left-hand thread + 1x right-hand thread, also the counter nuts! Thread: M14x1,25

Tie rods connection fork. This connection fork joins the internal tie rods. Suitable for Citroen

DS, starting from year of construction 1965. Or. No. DX443-73

Tie rod end sealing sleeve down (for tie rods with lubricating nipple). Suitable for Citroen DS

Dimension: 13 x 40mm.

Tie rod end on the right, for the internal tie rod. Suitable for Citroen DS, starting from year of

construction 1965. Or. No. DX443-04A

Steering rod separating fork, workshop quality

Tie rod end, with 22,0mm pin. Suitable for Citroen DS, to year of construction 1965. Or. No. DS4134A

Anti roll bar bearing shells (4 fittings). Suitable for Citroen DS front axle. Or. No. DX435111A

Anti roll bar rod spring. It is mounted in the fixture for the redirecting. Suitable for Citroen

DS. Or. No. DS435-147 + 1D5410216W

Starting pilot, 200ml. Brings tired engines to running, e.g. after long holding time.

Dust cap for aluminum brake valve. Suitable for Citroen DS, to year of construction 1971. Or. No

DM453-36

Dust cap for the steel brake valve. Suitable for Citroen DS, starting from year of construction

1971. Or. No. 5420552

Plug socket, metall, seven poles, at trailer towing coupling

• Suitable for this article
• 
  Metal plug, seven poles, for the trailer
  10,81 €

Vertical wall on the left + right, B-post. Suitable for Citroen DS Cabrio. (Mounting for the

striker plate. Cover to the rear fender).

• Suitable for this article

Stud bolt for the drive shaft. Dimension: M12x1,25 x 51. Suitable for Citroen DS + Citroen HY. Or

No. 1D5423871

Stud bolt M7 on M8. 45mm lengths. Special production!

• Suitable for this article
• 
  copper nut M7 for exhaust system ! For exhaust system and outlet manifold
  1,46 €

M7, stud bolt M7x28. (e.g. screening plate on manifold Citroen DS). Or. No. ZC9616135W

• Suitable for this article
• 
  copper nut M7 for exhaust system ! For exhaust system and outlet manifold
  1,46 €

Stud bolt M7x43mm (thread M7x1). This stud bolt are installed, for example, at the exhaust elbow

with Citroen 15CV. Elbow pipe Citroen DS, etc. Universally fitting!

• Suitable for this article
• 
  copper nut M7 for exhaust system ! For exhaust system and outlet manifold
  1,46 €

Stud bolt M8 on M10. 38mm lengths. Special production!

• Suitable for this article
• 
  M8, copper nut, for 12mm open end wrench. For exhausts + exhaust manifolds.
  0,94 €
• 
  M8, copper nut M8, for 13mm tool. Universal suitable e.g. for exhausts +
  0,88 €

stud bolt M8x35

• Suitable for this article
• 
  M8, copper nut, for 12mm open end wrench. For exhausts + exhaust manifolds.
  0,94 €

Stud bolt M8x45, e.g. elbow securement Citroen DS.

• Suitable for this article
• 
  M8, copper nut, for 12mm open end wrench. For exhausts + exhaust manifolds.
  0,94 €

Stud bolt M8x50, cylinder head exhaust elbow. Suitable for Citroen DS + HY. Original Citroen!

• Suitable for this article
• 
  M8, copper nut M8, for 13mm tool. Universal suitable e.g. for exhausts +
  0,88 €

stud bolt M8x55

• Suitable for this article
• 
  M8, copper nut, for 12mm open end wrench. For exhausts + exhaust manifolds.
  0,94 €

stud bolt M8x62

out turner for studs for 7mm bolts, profi quality of Facom

out turner of studs for 9mm bolts, profi quality of Facom

stone guard MOTIP, colour grey for spray gun, 1000ml

Stone guard corner (1 pair) for the rear fender. Suitable for Citroen DS convertible.

Camshaft drive chain duplex, 66 chain links. Suitable for Citroen 11CV, 15CV, ID19, DS19, HY

1911ccm to year of construction 1966. Original quality!

Camshaft drive chain duplex, 70 chain links, suitable for Citroen DS, starting from year of

construction 1966, also suitable for Citroen CX. Reproduction!

• Suitable for this article
• 
  Camshaft drive chain tensioner, suitable for Citroen DS, starting from year of
  49,48 €
• 
  Camshaft drive chains sliding rail. Suitable for Citroen DS, starting from year
  49,48 €

Camshaft drive chain duplex, 70 chain links, suitable for Citroen DS, starting from year of

construction 1966, also suitable for Citroen CX. Original supplier!

• Suitable for this article
• 
  Camshaft drive chain tensioner, suitable for Citroen DS, starting from year of
  49,48 €
• 
  Camshaft drive chains sliding rail. Suitable for Citroen DS, starting from year
  49,48 €

Camshaft drive chains sliding rail. Suitable for Citroen DS, starting from year of construction

1965. Length: 140mm. Or. No. 5411911 + 1D5411911V

• Suitable for this article
• 
  Screw M7x40, galvanized, to fix the gearbox holder on front axle
  0,58 €
• 
  Camshaft drive chain duplex, 70 chain links, suitable for Citroen DS, starting
  32,63 €
• 
  Camshaft drive chain tensioner, suitable for Citroen DS, starting from year of
  49,48 €

Camshaft drive chain tensioner, suitable for Citroen DS, starting from year of construction 1965

Brand manufacturer!

• Suitable for this article
• 
  Engine sealing compound grey, to 340°, 85ml, silicone basis. Optimally for oil
  5,15 €
• 
  Autoskop, for the search for abnomal vibrations or liquid leakage. Delivery
  11,81 €
• 
  Camshaft drive chain duplex, 70 chain links, suitable for Citroen DS, starting
  32,63 €
• 
  Camshaft drive chains sliding rail. Suitable for Citroen DS, starting from year
  49,48 €

Timing chain tensioner, suitable for Citroën ID19. Citroën 11CV + 15CV. Citroën HY. Dimensions

114x29mm. Or. No. 461256S. But beware: think carefully before installing the chain tensioner. Because the chain will inevitably rub against the chain tensioner (metal on metal = abrasion). We would rather drive without a chain tensioner and replace the timing chain more often.

Spur gear largely. 38 teeth. 27,6mm. Suitable for Citroen 11CV D, starting from year of

construction 10/1954. Citroen ID 19 + HY. Or. No. 457347

• Suitable for this article
• 
  Engine sealing compound grey, to 340°, 85ml, silicone basis. Optimally for oil
  5,15 €
• 
  Valve timing cover - seal (material: Paper). Suitable for Citroen 11CV
  6,24 €

Spur gear small. 19 teeth. Suitable for Citroen 11CV, all years of construction. Citroen ID 19 +

HY. Or. No. 461178

• Suitable for this article
• 
  Engine sealing compound grey, to 340°, 85ml, silicone basis. Optimally for oil
  5,15 €
• 
  Crankshaft nut (spur gears nut) 36x150. Suitable for Citroen 11CV. Wrench 46mm
  6,84 €
• 
  Valve timing cover - seal (material: Paper). Suitable for Citroen 11CV
  6,24 €

Spur gear set, suitable for Citroen 11D, ID19, DS19, HY. 38 teeth. Or. No. 457347 + 461178

• Suitable for this article
• 
  Engine sealing compound grey, to 340°, 85ml, silicone basis. Optimally for oil
  5,15 €
• 
  Crankshaft nut (spur gears nut) 36x150. Suitable for Citroen 11CV. Wrench 46mm
  6,84 €
• 
  Valve timing cover - seal (material: Paper). Suitable for Citroen 11CV
  6,24 €

Valve timing cover - seal (material: Paper). Suitable for Citroen 11CV (D-Engine). Citroen ID19

Citroen HY. Or. No. 451762. Made in Germany.

• Suitable for this article
• 
  Engine sealing compound grey, to 340°, 85ml, silicone basis. Optimally for oil
  5,15 €

Valve timing cover - seal, suitable for Citroen DS, starting from year of construction 1965

Original manufacturers!

• Suitable for this article
• 
  Screw M7x16 galvanized
  0,48 €
• 
  Washer, M7
  0,18 €

Valve timing cover - seal. Suitable for Citroen DS, to year of construction 1965. Or. No. 451374

Made in Germany.

Shaft seal in valve timing cover, suitable for DS + HY. Measurements: 48 x 65 x 10mm.

Front wall (fire wall) sealing rubber. This rubber is mounted above on the front wall, and seals to

the bonnet. Suitable for Citroen DS, starting from year of construction 10/1966. Or. No. DX852-68

Front wall (fire wall) sealing rubber. This rubber is mounted above on the front wall, and seals to

the bonnet. Suitable for Citroen DS, to year of construction 09/1966. Or. No. D852-124

Cam follower, suitable for Citroen DS + HY, from year of construction 6/1956 to 1966. Dimension: 26

x 50 x 14mm. Or. No. DS124-1

Cam follower, suitable for Citroen DS, starting from year of construction 1966. Dimension: 24x45mm

Or.Nr. DD124-1

Push rod for the exhaust valve. Suitable for Citroen DS. Length: 213mm. Or. No. DD124-5A