Vacuum hose (1030mm), before the throttle valve (connection from the rear) and 3 path connector for
auxiliary air slide valve. Suitable for Citroen DS IE. Inside diameter: 11,0mm. Length: 1030mm. Or. No. 2D5411135K
for Sonstige-Citroen DS
3329 Articles | Page 63 of 67
Vacuum hose, behind the throttle valve (Connection laterally) and 3 way connector for auxiliary air
slide valve. Suitable for Citroen DS IE. Inside diameter: 11,0mm. Length: 608mm. Or. No. DX144-218A
Vacuum hose for the full load switch. Suitable for Citroen DS IE (injection engine). Outside
diameter: 10mm. Inside diameter short side: about 4mm. Inside diameter long side: about 5,5mm. Or. No. DX144243A
Vacuum hose, between throttle valve case and pressure sensor. Suitable for Citroen DS IE. Inside
diameter: 7,0mm. Or. No. DX144-226A
Lower cover sheet on the left, for the hydraulic lines (horizontal mounting). For the wheel housing
in front on the left. Suitable Citroen DS. Or. No. DX434-106.
Lower cover sheet on the left, for the hydraulic lines (horizontal mounting). For the wheel housing
in front on the left. Suitable Citroen DS. Or. No. DX434-106. Orignal Citroen, no reproduction. Inclusive Seal and rubber plug.
Lower cover sheet on the right, for the hydraulic lines (horizontal mounting). For the wheel
housing in front on the right. Suitable Citroen DS. Or. No. DX434-107.
Lower cover sheet metal on the right, for the hydraulic lines (horizontal mounting). For the wheel
housing in front on the left. Suitable Citroen DS. Or. No. DX434-107. Orignal Citroen, no reproduction. Inclusive seal and rubber plug.
USB A+C adapter (12 volt) for cigarette lighter. The adapter has 2 connections. 1x USB-A (the large
wide plug) and 1x UBB-C (the new small plugs).
Valve (rubber valve) for rim. Suitable for Citroen 2CV, DS, CX, HY, GS. Renault R4, R5, R6, R8
R10, rear engine. Peugeot 203, 403, 404, 504, 604, 204, 304, J7. For valve hole: 11,3mm. Length: 42,5mm.
Valve long (rubber valve) for rim. To uses this long valve, if the rim has a large wheel cover
(with cutout for the valve). Suitable for Citroen DS, CX, HY, GS. Renault R4, R5, R6, R8, R10, rear engine. Peugeot 203, 403, 404, 504, 604, 204, 304, J7. For valve hole: 11,3mm. Length: 61,5mm.
Valve cover gasket, suitable for Citroen DS, starting from year of construction 1965. Citroen HY
petrol, starting from year of construction 1969 (final version). Citroen CX (first version).
Valve cover gasket. Suitable for Citroen DS, of year of construction 7/1961 to 1966. Citroen HY
The seal is flat and has a circulating edge! Or. No. DS132-4A
Valve grinding-in paste (engine valves in the cylinder head), 100ml box. The double box contains
pre-grinding paste (rough) and regrinding paste (fine).
- Suitable for this article
Valve guide inlet, suitable for Citroen DS, starting from year of construction 1965. Dimension
8x13x60,2mm. Or.Nr 1D5412002J
Valve spring cotter for the inlet valve (per piece). Suitable for Citroen DS + DS21 (engine DX), of
year of construction 1965 to 05/1967. Or. No. A124-18
Valve spring cotter, befitting for Citroen DS, starting from year of construction 1968. The valve
stem has 3 grooves. Suitable for inlet + exhaust valve. You need 2 pieces per ventil. Or. No. 1A 5 412 011 G
Valve stem for the exhaust. Suitable for Citroen DS19, DS20, DS21, DS23, CX petrol engines. (1
piece). For valve stem diameter 7.8 - 8.0 mm. Inner diameter at bottom: 10.0 mm.
Valve stem seals (8 fittings). Suitable for Citroen DS 20/21/23, starting from year of construction
1965. Inlet: Valve stem 8mm. Exhaust: Valve stem 9mm.
Valve stem seals (rubber rings). Suitable for Citroen 11CV (PERFO + D-Engine). Citroen DS, early
years of construction. Set 8 fittings. Dimension: 7 x 11 x 2,5mm. Or. No. 456998
Valve stem seals for the intake. Suitable for Citroen DS19, DS20, DS21, DS23, CX petrol engines. (4
pieces). For valve stem diameters 7.5 - 8.00 mm. Inner diameter at bottom: 10.5 mm
Valve stem seals. Suitable for Citroen DS 20/21/23, from year of construction 1965. Citroen HY
Inlet: valve stem 7.8 - 8.0 mm. Inner diameter at bottom: 10 mm. Exhaust: valve stem 7.5 - 8.0 mm. Inner diameter at bottom: 10.5 mm.
Valve adjusting screw (valve clearance). Suitable for Citroen DS + Citroen HY. Thread: M7. Length
26mm. Or. No. 1D5412567A
Connection rubber for the intake manifold. Suitable for DS IE (injection engine). Outside diameter
59mm. Height: 45mm. Per piece. Or. No. DX141117A
Connection rubber, between the heater case and the air inlet nozzle on the left. Suitable for
Citroen DS. Or. No. DS64352
Connection bellow, for the air hose on the right side to the vehicle interior. Suitable for Citroen
DS. The collar is silver colored, and isolate with foam material. Or. No. DX643-6
Tie bar (wire rope in front + rear) for the headlight vertical adjustment. Suitable for Citroen DS
starting from year of construction 1967. Or. No. DX541-74A.
Tie bar for the guidable auxiliary headlights (4mm diameter, 96mm long). Mounted on the right side
between the tension spring and the long tie bar. Suitable for Citroen DS, starting from year of construction 1967. Or. No. DX541-164.
Hood latch on the left + right (2-piece). Suitable for Citroen DS Cabrio. Or. No. DS971-39.
- Suitable for this article
Carburetor sealing set, for Solex PBICA. Suitable for Citroen 2CV, DS, 11CV, HY. Peugeot 403, 404
504 L, J7. Renault Dauphine + Floride. The diaphragm has a diameter of 20mm.
Carburetor, Solex 34 PBIC. Reproduction. Suitable for Citroen ID + DS, Installed of year of
construction 1965 to 1968.
Carburetor sealing set small, Solex PBICA. Suitable for Peugeot 203, 403, 404. Citroen 11CV, HY, DS
(early years of construction).
Carburetor sealing set, for Solex carburetor 28/36 SFIF. Suitable for Citroen ID19, DS20, DS21. The
carburetor sealing set are supplied inclusive diaphragm + float needle valve.
Carburetor sealing set, for Solex carburetor 32SDID. Suitable for Citroen ID19. The carburetor
sealing set are supplied inclusive. Diaphragm + float needle valve.
3329 Articles | Page 63 of 67
Select your Citroen 
Please select your Peugeot 
Please select your Citroen Renault 
