crankshaft-camshaft-piston-flywheel for Sonstige-Citroen Estafette

Bushing in the flywheel (primary shaft mount). Dimension: 12x16x20mm. Or. No. 6045759 + 7700553174

This self-lubricating brass bushing is used in many Renault R4 (large + small engine), R5, Estafette, 4CV, Dauphine, Caravelle, R8, R10....

Liners sealing rings down, made of copper. Diameter: 62,5x70x1mm. Suitable for the following

Renault liners. Our. No. 80059 (Renault + Dauphine). 80060 (R4, Estafette, Dauphine, Floride). Per piece.

R4/4CV/Dauphine/R5, crankshaft thrust washer (axial clearance), 1 oversize 0,10mm. Dimension: Inner

diameter 44mm, outer diameter 55,6mm, 2mm thick. Suitable for Renault engine: 662, 680 702, 690, 839 706, 670, 800,B1B, 800 70. Capacity 603cc, 748cc, 782cc, 845cc. Suitable for Renault R4, 4CV, Dauphine, Dauphinoise, Juvaquatre, R5 (782cm³), Floride

R4/4CV/Dauphine, connecting rod bearing (complete set). Dimension: Standard dimension. (41.128 to

41,138mm). Wide one: 21,16mm. Suitable for Renault engines: 662, 690, 680 702, 839 706, 670, 800 710, B1B. (603cc, 748cc, 782cc, 845cc). Installed from year of construction 1951 to 12/1985. Suitable for Renault R4, 4CV, Dauphine, Dauphinoise, Juvaquatre, R5 (782cm³), Floride, Estafette (747cm³). For piston rod pins: 38,00mm.

R4/4CV/Dauphine/R5, connecting rod bearing set. Wide 21,16mm. 1 oversize (+0,25). Suitable for

Renault engines: 662, 690, 680,702, 839 706, 670, 800 710. (603cc, 748cc, 782cc, 845cc). Installed from year of construction 1951 to 12/1985. For piston rod pins: 37,75mm. Suitable fpr R4, R5, 4CV, Dauphine, Dauphinoise, Juvaquatre, R5 (782cm³), Floride, Estafette (747cm³)

R4/4CV/Dauphine, connecting rod bearing set. Wide 21,16mm. 2 oversize (+0,50). Suitable for Renault

engines: 662, 690, 680,702, 839 706, 670, 800 710. (603cc, 748cc, 782cc, 845cc). Installed from year of construction 1951 to 12/1985. For piston rod pins: 37,50mm.

R4/Estafette/Caravelle, connecting rod bearing set, 3 oversize (+0,75). Wide one: 20,75mm. Suitable

for Renault engines (5 crankshaft bearings, Cleon) 688 172,688,1 + 688.01 to year of construction 1975 (1108cc). All other engines 689 710 / C1C 700 (956cc) + 688 711 + 713. C1E 700, 754, 715, 720, 750 (1108cc). 813-02 (852cc).

R4/Estafette/Dauphine/Floride, piston + liner (4 pieces). Engine: Ventoux 670, 670-1, 670-5

800-02. Engine capacity: 845ccm. Suitable for Renault R4 (5CV), Estafette (R1090, 1091, 1092, 1092, 1095, 2101 2130, 2131), Dauphine + Ondine + Gordini, Floride, Fourgonette, R6 (R1180 09/1968 to 04/1969). Bore: 58,0mm. Piston pin: 14 x 48mm. Piston rings: 1,75 + 2 + 3,5mm. Outside diameter down: 62,50mm. Outside diameter above: 73,0mm. Height totally: 126,0mm. Attention: It is importand that the liners are mounted with copper rings at the bottom. Our article number 80182

• Suitable for this article
• 
  piston ring presenting pliers for diameter 40-100.
  22,71 €
• 
  Piston ring compressor, 60 to 90mm clamping range. Hobby version (not for daily
  16,76 €
• 
  Liners sealing rings down, made of copper. Diameter: 62,5x70x1mm. Suitable for
  9,82 €

R4/R5/Estafette/Caravelle, thrust washer for the crankshaft, from 1975 onwards. Engines Renault

688.02/10/11,688, C1E (1108ccm). Standard dimension

R4/R5/R6/Caravelle, piston rings (engine 1108cc), for 1 piston. Bore: 70mm. Suitable for Renault

R4, R5, R6, Caravelle. Piston rings: 2,0 + 2.0 + 3,5mm.

• Suitable for this article
• 
  piston ring presenting pliers for diameter 40-100.
  22,71 €
• 
  Piston ring compressor, 60 to 90mm clamping range. Hobby version (not for daily
  16,76 €

R4/R5/R6/R8/R10, piston + liner (4 item). Suitable for Renault engine with engine capacity: 1108cc

(34 to 53 HP). Engine: 688/C1E. Bore: 70,0mm. Compression: 9,5: 1. Shank measurement: 85,8mm (engine mount bore). Piston pin: 18 x 62mm. Piston rings: 1,75 - 2.0 - 3,5mm. Suitable for Renault R4 GTL, R4 F6, R5 TL + GTL, R6 tl, R8 Major/S, R10, Estafette. Outside diameter down: 75,44mm. Outside diameter above: 85,80mm. Height totally: 135,0mm.

• Suitable for this article
• 
  piston ring presenting pliers for diameter 40-100.
  22,71 €
• 
  Piston ring compressor, 60 to 90mm clamping range. Hobby version (not for daily
  16,76 €
• 
  Liners gasket bottom (12 pcs.. white = 0.06mm / grey = 0,07mm / red = 0,09mm)
  14,78 €

R4/R5/R8/R10/Caravelle/Estafette, crankshaft bearing. Wide one: 2x 24,47mm + 3x 19,48mm. 1 oversize

(+0,25). Suitable for Renault engines: 689 710 + C1C 700 (956cc). 688 711 + 713, 688 1 (1108cc).

R4/R5/R8/R10/Caravelle/Estafette, crankshaft bearing. Wide one: 2x 24,47mm + 3x 19,48mm. 2 oversize

(+0,50). Suitable for Renault engines: 689 710 + C1C 700 (956cc). 688 711 + 713, 688 1 (1108cc).

R4/R5/R8/R10/Caravelle/Estafette, crankshaft bearing. Wide one: 2x 24,47mm + 3x 19,48mm. Standard

dimension. For crankshaft from 45,989 to 45,999mm. Suitable for Renault engines: 689 710 + C1C 700 (956cc). 688 711 + 713, 688 1 (1108cc).

R4/R5/R8/R10/Estafette, crankshaft bearing (5 bearings, C = Cleon). For crankshafts with 44mm

diameter. 0,25 oversize. Suitable for Renault engines: 688, 689, 804, 810, 812. For engines until 1974! From 1975 on crankshafts with 54,8mm diameter were used.

R4/R5/R8/R10/Estafette, crankshaft bearing (5 bearings, C = Cleon). For crankshafts with 44mm

diameter. Standard size. Suitable for Renault engines: 688, 689, 804, 810, 812. For engines until 1974! From 1975 on crankshafts with 54,8mm diameter were used.

R4/R5/R8/R10/Estafette, crankshaft bearing (5 bearings, C = Cleon). For crankshafts with 54.8mm

diameter. 0,25 oversize. Width: 5x 19,47mm. Suitable for Renault engines: 688 1, C1E700, C1E754, C1E715, C1E720, C1E750. cubic capacity: 1108cc. For engines from 1975 onwards! Crankshafts with 44mm diameter were used until 1974.

R4/R5/R8/R10/Estafette, crankshaft bearing (5 bearings, C = Cleon). For crankshafts with 54.8mm

diameter. 0,50 oversize. Width: 5x 19,47mm. Suitable for Renault engines: 688 1, C1E700, C1E754, C1E715, C1E720, C1E750. cubic capacity: 1108cc. For engines from 1975 onwards! Crankshafts with 44mm diameter were used until 1974.

R4/R5/R8/R10/Estafette, crankshaft bearing (5 bearings, C = Cleon). For crankshafts with 54.8mm

diameter. Standard size. Width: 5x 19,47mm. Suitable for Renault engines: 688 1, C1E700, C1E754, C1E715, C1E720, C1E750. cubic capacity: 1108cc. For engines from 1975 onwards! Crankshafts with 44mm diameter were used until 1974.

R4/Estafette/Caravelle, connecting rod bearing set, 1 oversize (+0,25). Wide one: 20,75mm. Suitable

for Renault engines (5 crankshaft bearings, Cleon) 688 172,688,1 + 688.01 to year of construction 1975 (1108cc). All other engines 689 710 / C1C 700 (956cc) + 688 711 + 713. C1E 700, 754, 715, 720, 750 (1108cc). 813-02 (852cc). These engines were used in Renault R4, R4F4, R4F6, etc.

R4/Estafette/Caravelle, connecting rod bearing set, standard dimension. (43.965 - 43,980mm). Width

20,75mm. Suitable for Renault engines (5 crankshaft bearings, Cleon) 688 192 + 688 1 (1108cc) starting from year of construction 1975. Engine 810 01 to 810 29 (1289cc). 810 96 + 810 97 (1289cc). C1G + C1J (1397cc). These engines were used in Renault R4, R4F4, R4F6, etc.

R4/R5/R8/R10/Estafette/Caravelle, connecting rod bearing set. Width: 17.70mm. 0,25 oversize. Fits

Renault engines (5 crankshaft bearings, Cleon) with 54.8mm + 44mm diameter. Engines: 688 192 + 688.1 (1108cc). Engine 810.01 to 810.29 (1289ccm). 810.96 + 810.97 (1289ccm). 810 725, 810 726, 840 730, C2J 713, 8347 725.... C1G + C1J (1397ccm). Renault R4 (rarely used). Renault R5, R10, Estafette, R16 (all),....

R4/R5/R8/R10/Estafette/Caravelle, connecting rod bearing set. Width: 17.70mm. 0,50 oversize. Fits

Renault engines (5 crankshaft bearings, Cleon) with 54.8mm + 44mm diameter. Engines: 688 192 + 688.1 (1108cc). Engine 810.01 to 810.29 (1289ccm). 810.96 + 810.97 (1289ccm). 810 725, 810 726, 840 730, C2J 713, 8347 725.... C1G + C1J (1397ccm). Renault R4 (rarely used). Renault R5, R10, Estafette. R16 (all),.....

R4/R5/R8/R10/Estafette/Caravelle, connecting rod bearing set. Width: 17.70mm. Standard size. Fits

Renault engines (5 crankshaft bearings, Cleon) with 54.8mm + 44mm diameter. Engines: 688 192 + 688.1 (1108cc). Engine 810.01 to 810.29 (1289ccm). 810.96 + 810.97 (1289ccm). 810 725, 810 726, 840 730, C2J 713, 8347 725.... C1G + C1J (1397ccm). Renault R4 (rarely used). Renault R5, R10, Estafette, R16 (all),......

Shaft seal crankshaft 35 x 50 x 8. Suitable for Renault R4, Estafette, R5, R9, R11, R12, R15, R17

R19, R21, Nevada, Twingo, Clio, Rapid. Or. No. 7700859691

Shaft seal crankshaft rear. Dimension: 70 x 90 x 10mm. Suitable for Renault R4 (852cc). R5, R6, R8

R10, R12, R15.

Shaft seal crankshaft rear. Dimension: 80 x 100 x 13mm. Suitable for R4 (955, 956, 1108cc), R5

Estafette, R12, Fuego, R11, R20, R30, R25, R16, R15. Peugeot 504 V6, 604 V6, Citroen XM V6. Made in Germany.

Shaft seal crankshaft rear. Dimension: 80 x 100 x 13mm. Improved version from silicone. Suitable

for Renault R4 (955, 956, 1108cc). R5, Estafette, R12, Fuego, R11, R20, R30, R25, R16, R15.Peugeot 504 V6, 604 V6, Citroen XM V6.

Shaft seal crankshaft rear. Suitable for nearly all Renault engines. Also for V6 engines by Peugeot

504, 604. Renault R30, Alpine A310. Dimension: 80x100x8mm. Or. No. 7700859692

Shaft seal crankshaft in front (35 x 50 x 10). Suitable for many Renault (R4, R5, R8, R10 R9, R12

R16, Fuego etc.). Or. No.7703087097

Timing chain set, old version. Suitable for Renault R4 (854cc³). R5, R10, R12, Estafette, Twingo

Engine: 800, 840, 847, C1J. Consisting of: Or. No. 7701460489, 7700722758, 7700655335, 7700564398. Made in Spain. Attention: Different gears are included (but have the same number of teeth). Please install the version you find in your engine!

Camshaft drive chain tensioner, old version. Suitable for Renault R4 (854cc ³). R5, R10, R12

Estafette, Twingo. Engine: Motor: 800, 840, 847, C1J. Or. No. 7701460489, 7700860495, 6000547142