Tube bending sleeve. Suitable for hose outer diameter of 21,8 > 24mm. Length: 90mm. With this you
can easily produce bent water hoses. Simple and ingenious!
for Sonstige-Citroen GS
772 Articles | Page 13 of 16
Hose clamp 11-17mm, especially for radiator hose. Vintage look. Embossed band with raised edges
This prevents the hose from being damaged. Small screw housing with 7mm hexagon head screw (with slot). Normal, modern hose clamps squeeze the hose. This is completely avoided with these clamps. And they even look better.
Hose clamp 13-20mm, especially for radiator hose. Vintage look. Embossed band with raised edges
This prevents the hose from being damaged. Small screw housing with 7mm hexagon head screw (with slot). Normal, modern hose clamps squeeze the hose. This is completely avoided with these clamps. And they even look better.
Hose clamp 15-24mm, especially for radiator hose. Vintage look. Embossed band with raised edges
This prevents the hose from being damaged. Small screw housing with 7mm hexagon head screw (with slot). Normal, modern hose clamps squeeze the hose. This is completely avoided with these clamps. And they even look better.
Hose clamp 19-28mm, especially for radiator hose. Vintage look. Embossed band with raised edges
This prevents the hose from being damaged. Small screw housing with 7mm hexagon head screw (with slot). Normal, modern hose clamps squeeze the hose. This is completely avoided with these clamps. And they even look better.
Hose clamp 22-32mm, especially for radiator hose. Vintage look. Embossed band with raised edges
This prevents the hose from being damaged. Small screw housing with 7mm hexagon head screw (with slot). Normal, modern hose clamps squeeze the hose. This is completely avoided with these clamps. And they even look better.
Hose clamp 26-38mm, especially for radiator hose. Vintage look. Embossed band with raised edges
This prevents the hose from being damaged. Small screw housing with 7mm hexagon head screw (with slot). Normal, modern hose clamps squeeze the hose. This is completely avoided with these clamps. And they even look better.
Hose clamp 32-44mm, especially for radiator hose. Vintage look. Embossed band with raised edges
This prevents the hose from being damaged. Small screw housing with 7mm hexagon head screw (with slot). Normal, modern hose clamps squeeze the hose. This is completely avoided with these clamps. And they even look better.
Hose clamp 38-50mm, especially for radiator hose. Vintage look. Embossed band with raised edges
This prevents the hose from being damaged. Small screw housing with 7mm hexagon head screw (with slot). Normal, modern hose clamps squeeze the hose. This is completely avoided with these clamps. And they even look better.
Hose clamp 40-56mm, especially for radiator hose. Vintage look. Embossed band with raised edges
This prevents the hose from being damaged. Small screw housing with 7mm hexagon head screw (with slot). Normal, modern hose clamps squeeze the hose. This is completely avoided with these clamps. And they even look better.
Hose clamp 50-65mm, especially for radiator hose. Vintage look. Embossed band with raised edges
This prevents the hose from being damaged. Small screw housing with 7mm hexagon head screw (with slot). Normal, modern hose clamps squeeze the hose. This is completely avoided with these clamps. And they even look better.
Hose clamp 57-75mm, especially for radiator hose. Vintage look. Embossed band with raised edges
This prevents the hose from being damaged. Small screw housing with 7mm hexagon head screw (with slot). Normal, modern hose clamps squeeze the hose. This is completely avoided with these clamps. And they even look better.
Blank key door lock. Suitable for Citroen DS, up to year of construction 1974. Citroen AMI6 + AMI8
Citroen SM, CX 2000, GS, VISAS. Peugeot J9. Maserati Bora, Indy 4900 America, Merak. For lock manufacturers: RONIS. Shaft length: 17,3mm. Shaft width: 7,0mm. Please observe the cross section of the key bit.
Blank key door lock. Suitable for Citroen DS, up to year of construction 1974. Citroen AMI6 + AMI8
Citroen SM, CX 2000, GS, VISA. Peugeot J9. Maserati Bora, Indy 4900 America, Merak. For lock manufacturers: RONIS. Shaft length: 17,3mm. Shaft width: 7,0mm. Please observe the cross section of the key bit.
Blank key door lock. Suitable for Citroen DS, up to year of construction 1974. Citroen AMI6 + AMI8
Citroen SM, CX 2000, GS, VISAS. Peugeot J9. Maserati Bora, Indy 4900 America, Merak. For lock manufacturers: RONIS. Shaft length: 20,0mm. Shaft width: 7,0mm. Please observe the cross section of the key bit.
Blank key door lock. Suitable for Citroen DS, up to year of construction 1974. Citroen AMI6 + AMI8
Citroen SM, CX 2000, GS, VISA. Peugeot J9. Maserati Bora, Indy 4900 America, Merak. For lock manufacturers: RONIS. Shaft length: 20,0mm. Shaft width: 7,0mm. Please observe the cross section of the key bit.
Rear mud flaps (left + right) with Citroen logo. These mud flaps can be universally installed
(Citroen 2CV, Dyane, Mehari, DS, AMI, etc.). Dimensions approx.: 22 cm wide, 25 cm high. The mud flaps have different mounting holes. This allows the mounting height to be adjusted. The mud flaps are of good quality. The brackets for mounting must be made yourself! (There's always something).
Screw set M5-M8 galvanizes. Consisting of: 20x M5x20, 15x M5x30, 25x M6x16, 20x M6x20, 12x M6x25
8x M6x30, 10x M7x20, 8x M7x30, 15x M8x20, 10x M8x30, 8x M8x40. Altogether 151 screws in a clear synthetic box.
Screw-safety-paint, yellow, 20ml bottle including brush. This paint to be fit as sealing and
marking paint and can be directly brought onto the spot which has to be marked.Standart product in the 60´s for marking on gearboxes, engines, hydraulic parts and chassis parts
Heat shrink tubing (kit from 100). These handy sheaths form a protective water resistant insulation
over exposed wiring and electrical connections. Designed for automotive use. Supplied in a plastic organiser.
SEV, condenser. Suitable for Citroen DS (with SEV contact cartridge, starting from year of
construction 01/1969), GSA, HY. Peugeot 404, 504 etc.. Renault R4, R5, Fuego etc.. Length: 35,5mm. Diameter: 17,0mm. Brand manufacturer! Made in France.
SEV, distributor rotor SEV. Type S4510. For distributors with contact cassette. Suitable for
Citroen DS + HY. Peugeot 504 GR, SR (from year of construction 1979). Renault R4 GTL (R1128, 2370 2430), R8, R10, R12, Renault R16, R18, Fuego. Matra Bagheera. Or. No. Peugeot: 5937.27 + 5937.07. Renault: 7701020056
PDF FILE 
SEV, distributor rotor. Suitable for Renault R4, R5 1.3 (1224, 1394) + R5 Alpine (1223). Citroen
AMI Super, CX1 2000, GS Birotor, GS 1.0 + 1.2. Or. No. GX0615101A + 7701007678. Length overall: 50mm. Height overall: 25mm. Inner diameter: 16mm
SEV, distributor cap system SEV. Lateral, in the height shifted, ignition cable inlets. Suitable
e for Citroen DS, starting from year of construction 3/1972. Citroen GS, Simca, Peugeot 404 XC5. Diameter distributor: 65mm. Or. No. ID5422678C
16 ampere fuse with screw-connections, optimal to protect additional loads (devices). The housing
can be equipped with other fuse strengths (ratings) .
Fuse set (glass fuse).Contents: 1x 5A, 10A , 15A, 20A, 30A (amps) each. Dimension: 6,3 x 32mm
Complete in an outer packaging (ideal for the 2CV, DS, HY... travel kit!).
Fuse box with cap. Color: black. Holds 4 glass fuses. Replica. Connection: flat plug! Compatible
with Citroën 2CV, DS, and HY. Of course, this fuse box can also be used as a universal part!
Fuse box with cap. Color: white. Holds 4 glass fuses. Replica. Connection: flat plug! Compatible
with Citroën 2CV, DS, and HY. Of course, this fuse box can also be used as a universal part!
Sikaflex 221, 300ml, cartouche. Adhesion-strong sealing compound, for sealing sheet metal overlaps
(sheet metal grooves). Color: black. Overpaintable.
Rubber mount - silent rubber "Fluidbloc" lower wishbone on front axle. Suitable for Citroen GS from
1973 onwards. Citroen GSA all years of construction. Or. No. 95495152
Silicone spray, 400ml. Manufacturer: SONAX. Silicone Spray is colourless. It displaces water and
offers very good lubricating properties. It can be used for metal, rubber, plastic and even wood. It is ideal for creaking dashboards, for example. Lubricate sunroof guides, door side window guides, etc.
Sodium carbonate ( Soda) blast gun. Washing soda is an effectiv procedure to remove paint and
surface rust without harming the support material. It don`t cause any damage of rubber , glas or plastic, so a complicated covering is not neccessary. In opposite to sandblast, Soda protects the cleaned material against rust at once. Enviroment friendly and gently removal from different coatings on boats, wooden furniture, glas and window frames is possible. This blast gun is not suitable for sandblast usage. Operating pressure is 87-174 lbs. Minimum air consumption is 180 liter/minute at 120 lbs.
772 Articles | Page 13 of 16
Select your Citroen 
Please select your Peugeot 
Please select your Citroen Renault 
