Cylinder head for Alle R4

Label with 3 devil. Suitable for Renault R3 (R3 with 3CV). This label was mounted on the valve cap.

Exhaust valve. Diameter: 29,0mm. Shank: 7,0mm. Construction length: 89,0mm. Suitable for Renault R4

(1.0 + 1,1L). Renault R5 + R8. Or. No. 770068247

• Suitable for this article
• 
  Inlet valve. Diameter: 33,5mm. Shank: 7,0mm. Construction length: 89,8mm
  9,32 €
• 
  Valve stem seal, suitable for inlet and exhaust (8 fittings). For engine
  13,78 €

Exhaust valve. Suitable for Renault R4, Dauphine, Floride. Engines: B1A + B1B, 845cc. Diameter

25,0mm. Overall height: 73,8mm. Valve stem: 7,0mm.

• Suitable for this article
• 
  Inlet valve. Suitable for Renault R4, Dauphine, Floride. Engines: B1A + B1B
  9,21 €
• 
  Valve stem seal, suitable for inlet and exhaust (8 fittings). For engine
  13,78 €

Inlet valve. Diameter: 33,5mm. Shank: 7,0mm. Construction length: 89,8mm. Suitable for Renault R4

(1.0 + 1,1L). Renault R5 + Twingo. Or. No. 7701458180

• Suitable for this article
• 
  Exhaust valve. Diameter: 29,0mm. Shank: 7,0mm. Construction length: 89,0mm
  10,81 €
• 
  Valve stem seal, suitable for inlet and exhaust (8 fittings). For engine
  13,78 €

Inlet valve. Suitable for Renault R4, Dauphine, Floride. Engines: B1A + B1B, 845cc. Diameter

28,2mm. Overall height: 73mm. Valve stem: 7,0mm. Suitable valve spring cotter = 81064

• Suitable for this article
• 
  Exhaust valve. Suitable for Renault R4, Dauphine, Floride. Engines: B1A + B1B
  10,81 €
• 
  Valve stem seal, suitable for inlet and exhaust (8 fittings). For engine
  13,78 €
• 
  Valve spring cotter inlet valve (1 slot). Suitable for Renault R4.
  2,36 €

Fiber washer seal for the connector of the valve cap. Suitable for Renault R4, Renault with rear

engine, Estafette, R5, R16. M8x12x1,0mm.

M7, stud bolt for 2CV, DS, R4. Measurement: 38mm. (e.g. elbow spider on cylinder head 2CV).

• Suitable for this article
• 
  copper nut M7 for exhaust system ! For exhaust system and outlet manifold
  1,46 €

Stud bolt M7 on M8. 45mm lengths. Special production!

• Suitable for this article
• 
  copper nut M7 for exhaust system ! For exhaust system and outlet manifold
  1,46 €

Stud bolt M8 on M10. 38mm lengths. Special production!

• Suitable for this article
• 
  M8, copper nut, for 12mm open end wrench. For exhausts + exhaust manifolds.
  0,94 €
• 
  M8, copper nut M8, for 13mm tool. Universal suitable e.g. for exhausts +
  0,88 €

Valve cover gasket, suitable for Renault R4, R5. For engines with 747 + 782 + 845cc. Dimension

About 345 x 93mm.

• Suitable for this article
• 
  Fiber washer seal for the connector of the valve cap. Suitable for Renault R4
  0,40 €

Valve cover gasket. For engines with 852cc, 955cc, 956cc, 1108cc. Suitable for Renault R4, R5, R6

R8, R10, R12, Estafette. Material: rubber. Attention: Please take the seal out of the bag and unfold it (it seems as if the bag contains the wrong seal!)

• Suitable for this article
• 
  Fiber washer seal for the connector of the valve cap. Suitable for Renault R4
  0,40 €

Valve clearance gauge. 0,05 > 1,00mm. Precision - feeler gage with conical lamellas

Valve spring set (8 item). Suitable for Renault 4CV, Dauphine, R4 small engine (to 845ccm)

Diameter: 22mm. Length: 38mm

Valve guide inlet + exhaust. Suitable for Renault with rear engine (Dauphine, Floride). Renault R4

Inside diameter: 7,00mm. Outside diameter: 11,12mm. Length: 35mm.

Valve guide inlet + exhaust. Suitable for Renault R4, R5, R6, R8, R10. Inside diameter: 7,0mm

Outside diameter: 11,15mm. Length: 41,4mm.

Valve guide for inlet + exhaust. Suitable for Renault R4, Dauphine, Floride. Engine: 782 + 845cc

Length: 34,0mm. Inside diameter: 7,0mm.

Valve spring cotter inlet valve (1 slot). Suitable for Renault R4.

Valve stem seal (rubber ring). Suitable for Renault 4CV, Foride, Estafette 1 version, Juva, R4

(first version). Or. No. 6039905. Per piece

Valve stem seal, suitable for inlet and exhaust (8 fittings). For engine: 852ccm, 955ccm, 956ccm

1108ccm. Suitable for Renault R4, R5, R8, Estafette. Outside diameter: 13,2mm. Amount: 10mm. Inside diameter: 7,0/10,0mm.

Valve stem seal, suitable for inlet and exhaust (per piece). For engine: 747ccm, 782ccm, 845ccm

Suitable for Renault R4, R5, Dauphine. Outside diameter: 14,2mm. Amount: 10mm. Inside diameter: 8,0mm.

Spark plug thread M14 thread inserts. Suitable for our repair kit 21176. Length of thread inserts

9.7 mm + 11.0 mm + 13.0 mm + 19.1 mm.

• Suitable for this article
• 
  Spark plug thread M14 repair kit (for repairing defective spark plug threads)
  22,71 €

Spark plug thread M14 cleaner, with a cutter for the spark plug sealing ring. This combination tool

can clean your contaminated thread and make it usable again. In addition, the sealing surface around the thread is nicely planed again. But be careful: if the spark plug thread is already badly damaged, you will need to insert a new thread (item 21176).

Spark plug thread M14 repair kit (for repairing defective spark plug threads). Hobby quality. For

all M14 spark plugs. The repair kit comes with an HSS thread cutter (drive wrench size 17 mm) and 4 thread inserts. Length of thread inserts: 9.7 mm + 11.0 mm + 13.0 mm + 19.1 mm.

• Suitable for this article
• 
  Spark plug thread M14 thread inserts. Suitable for our repair kit 21176. Length
  10,81 €

Cylinder head screw set (10 fittings). Thread: M10 x 100. Suitable for Renault R4 (1,0+1,1L). R5

Estafette (1,3L), Twingo.