intake and exhaust manifold for Alle R4

Manifold seal, inlet + exhaust. Suitable for Renault 4 Super (956cc).

Manifold seal, inlet + exhaust. Suitable for Renault R4, R5, Estafette, R12. For engines with

engine capacity: 852cc, 955cc, 1108cc, 1289cc.

Manifold seal, for inlet + exhaust. Suitable for Renault 4 + Renault with rear engine. Engine

capacity: 747 to 845cc. You need 2 pieces!

Crankcase ventilation (engine ventilation) Y-connector. Suitable for Renault R4 with engine: 800

(Billancourt). This connector is mounted between the hose from the valve cover and the connections to the carburettor and the intake manifold. Diameter of connections: 10,5mm/14mm + 6,5/10mm + 5,0/8,0mm. Or. No. 7700621597

copper nut M7 for exhaust system ! For exhaust system and outlet manifold. Please use only copper

nuts: no rust, no sticking!

M7, stud bolt for 2CV, DS, R4. Measurement: 38mm. (e.g. elbow spider on cylinder head 2CV).

• Suitable for this article
• 
  copper nut M7 for exhaust system ! For exhaust system and outlet manifold
  1,46 €

M8, copper nut M8, for 13mm tool. Universal suitable e.g. for exhausts + exhaust manifolds.

M8, copper nut, for 12mm open end wrench. For exhausts + exhaust manifolds.

M8, nut for 12mm wrenche. (Metal) (e.g. carburetor on intake manifold 2CV).

Stud bolt M7 on M8. 45mm lengths. Special production!

• Suitable for this article
• 
  copper nut M7 for exhaust system ! For exhaust system and outlet manifold
  1,46 €

M7, stud bolt M7x28. (e.g. screening plate on manifold Citroen DS). Or. No. ZC9616135W

• Suitable for this article
• 
  copper nut M7 for exhaust system ! For exhaust system and outlet manifold
  1,46 €

Stud bolt M7x43mm (thread M7x1). This stud bolt are installed, for example, at the exhaust elbow

with Citroen 15CV. Elbow pipe Citroen DS, etc. Universally fitting!

• Suitable for this article
• 
  copper nut M7 for exhaust system ! For exhaust system and outlet manifold
  1,46 €

Stud bolt M8 on M10. 38mm lengths. Special production!

• Suitable for this article
• 
  M8, copper nut, for 12mm open end wrench. For exhausts + exhaust manifolds.
  0,94 €
• 
  M8, copper nut M8, for 13mm tool. Universal suitable e.g. for exhausts +
  0,88 €

stud bolt M8x35

• Suitable for this article
• 
  M8, copper nut, for 12mm open end wrench. For exhausts + exhaust manifolds.
  0,94 €

Stud bolt M8x45, e.g. elbow securement Citroen DS.

• Suitable for this article
• 
  M8, copper nut, for 12mm open end wrench. For exhausts + exhaust manifolds.
  0,94 €

stud bolt M8x55

• Suitable for this article
• 
  M8, copper nut, for 12mm open end wrench. For exhausts + exhaust manifolds.
  0,94 €

stud bolt M8x62

Seal under carburetor (insulating plate between carburetor and intake manifold). Suitable for

Renault R4, R5, R8, R12. Inside diameter: 32mm.