for Citroën 2CV 204-304
Ballistol oil 200ml bottle. The universal oil, long-proven and unequalled. Optimally for rust
t protection, maintenance of precision mechanics, in addition, leather, wood etc. (Ballistol is also well- known as weapon oil) Ballistol gumming also after year not. To show for rust protection very easily with brush lubricator.
Battery holding hook, 215mm long. M5 thread. Suitable for Citroen DS, HY. 2CV etc. also suitable
for many Peugeot + Renault vehicles. Reproduction like original!
Battery charger - trickle charger for winter storage (OptiMate 1). Switchable between 6 volts and
12 volts. This small continuous charger is ideal for permanently connecting to a battery during the winter break. State-of-the-art technology protects against reverse polarity of the connections. It is suitable for normal lead batteries (those with acid). The maximum charging current is 0.6 amps. Please note: You cannot use this charger to quickly charge or reactivate empty batteries! It is therefore designed to keep the battery fresh and, if necessary, charge it very slowly. The scope of delivery also includes a charging cable that can be permanently connected to the battery. Simply route the plug connection to the outside and the charger can be connected without opening the bonnet.
Battery charger for 12 volts (OptiMate 6 Ampmatic). Charging capacity: 6 amps. The 'Swiss Army
knife' among battery chargers. You can connect all types of batteries (STD, AGM, EFB, GEL batteries). Almost all sizes can also be connected (3AH > 144Ah). This charger can even reactivate deeply discharged batteries (down to a discharge of 0.5 volts)! Its smart electronics make it possible. You can also test batteries. It has a safety circuit in case it is connected incorrectly. It controls the charging current according to the ambient temperature and has many other options. Whether it's a lawnmower, boat, car, motorhome, motorbike or tractor, this charger automatically adjusts to everything. And let's be honest, who knows what kind of battery is installed in modern vehicles these days? With this, it doesn't matter! Only modern electric vehicles cannot be charged with it! Of course, it can also be used as a normal battery maintenance charger. Our tip if you have several vehicles that are stored over the winter: get one of these chargers and equip the other vehicles with our maintenance chargers. The scope of delivery also includes a charging cable that can be permanently connected to the battery. Simply route the plug connection to the outside and the charger can be connected without opening the bonnet. Regular desulphation is important for a long service life of lead-acid batteries. And this is what these modern chargers can do.
Battery charger for 6 volts + 12 volts (OptiMate 5 6V/12V). Charging capacity: 3 amps at 12 volts
4 amps at 6 volts. This battery charger and trickle charger only charges lead-acid batteries (i.e. the batteries in classic cars). It can be used for both 6 volt and 12 volt batteries. This charger can also reactivate deeply discharged batteries (up to a discharge of 0.5 volts)! The clever electronics make it possible. You can also test batteries. It has a fuse circuit in case it is connected incorrectly. It controls the charging current according to the ambient temperature and has many other options. Regular desulphation is important for a long battery service life. And this is what these modern chargers can do.
Battery pole switch bent (space-saving). Just release knurled head bolt to stop current circuit.It
can be very easily used when you do not use your car for long time(winter)! This switch replaces battery negative pole lead!
Battery pole switch. Just release knurled head bolt to stop current circuit.It can be very easily
used when you do not use your car for long time(winter)! This switch replaces battery negative pole lead!
Coloured battery terminals. Red for positive. Black for negative. Suitable for all types. The risk
of mixing up the terminals when connecting the battery is now minimised. These coloured battery terminal connectors are suitable for cables with a maximum diameter of 12 mm (cable cross-section up to 113 mm²). They fit terminal sizes of 16-19 mm. They are suitable for 6 V and 12 V batteries. And they look great too! Made in Germany
Battery pole protecting cap from rubber. Color: red. Length: 52mm. Width: 35mm. Long side on the
right - cable inlet down.
Battery pole protecting cap from rubber. Color: black. Length: 52mm. Width: 35mm. Long side on the
right - cable inlet down.
Battery terminals cleaning + milling cross. Indispensable for vintage cars! Trim once, and the
electrical contact is back in order.
Control knob (black plastic ball), for heating, air conditioning, seats, etc.. Or. No. 6476.07
Suitable for Peugeot 104, 204, 304, 404, 504. NOS Peugeot
Clamp made of metal, for up to 10mm lines. (Cable harness, gasoline line, water hose etc.). The
clip can be inserted on each sheet metal seam up to the maximum strength by 2mm.
Fixing clamp for screwing on (for max. 9mm cables). Fixing hole in the clamp: 4.8mm. (e.g. for fuel
hoses, hydraulic hoses, wiring harness...)
Gasoline filter made of metal chromium-plates. The filter has a inspection window. Gasoline line
connection 5-6mm. Universal fitting.
Gasoline filter with check valve (membrane)preventing gasoline from flowing back again, universal
model. Better start after long immobilisation time. The membrane of the fuel pump does not run dry quickly. Indispensable for vintage cars. For fuel hose with 5,5 - 7,5 mm internal diameter. Diameter 34mm. Construction length totally 100mm.
Fuel pipe from cupro-nickel alloy. Outside diameter 7,95mm, length 5000mm. Suitable for Renault R4
R5 and many further vehicles.
Gasoline pump, completely made of metal. Suitable for Peugeot 204, 304, 305. Peugeot 403/8, to year
of construction 02/1961. Peugeot 404/U, starting from year of construction 12/1969. Or. No. 1450.75
Gasoline pumps repair set, only for SEV gasoline pumps. Diaphragm diameter: 75mm. Suitable for many
Renault (4CV, Dauphine, Floride, R4) + Peugeot (203,403,404). Citroen 11CV, HY, ID19.
Fuel pump seal for the connection at the engine block. Suitable for Citroen 2CV, Citroen DS after
1968, Renault, Peugeot. This seal replaces the paper gasket and is made of "KLINGERSIL". 0,5mm thick. Klingersil is an extremely resistant material, against oils, petrol, alcohol etc.
Fuel hose fabric-encases. Inside diameter: 6,0mm. Outside diameter: 11,0mm. By meters. Customer
cut, return not-possible!
Fuel hose fabric-encases. Inside diameter: 9,0mm. Outside diameter: 15,0mm. By meters. Customer
cut, return not-possible!
Fuel hose metal-encases. (2CV6) Inside diameter: 5,5mm, outside diameter: 10,5mm. By meters
Customer cut, return not-possible!
Fuel hose black fabric coated, for Citroen 2CV. (between gasoline pump + carburetors. By meters
Diameter: 5,5mm. Fasten please the hose with a hose clamp. Customer cut, return not possible!
Fuel hose, only from rubber (not fabic encases). Inside diameter: 6,0mm. The hose is almost optical
identical, to the early time used hoses. Customer cut, a return is not possible!
Fuel stabiliser - fuel additive - octane booster from ELF/Total, for winter storage and storage of
all 2 and 4-stroke engines. Ideal for our classic cars. Prevents corrosion in the tank and in the entire fuel system. Antioxidants prevent the fuel from ageing (the petrol remains ignitable). Binds and neutralises condensation in the tank. Eliminates starting difficulties when the vehicle has not been used for a long time. And as a special feature, the petrol additive has an octane booster. It therefore increases the ignitability of the petrol (knock resistance). Particularly interesting for regions in this beautiful world where there is no super petrol with at least 98 octane, or if you are involved in motor sports! Packaged in a high-quality aluminium can. Contents: 150ml. Application: 150ml is sufficient for 20 litres of petrol. Fill the tank completely. Fill in the fuel additive. Run the engine for 10 minutes. Done!
Gasoline stabilizer 250ml. Preserves and protects the fuel from ageing and oxidation. Prevents
corrosion in the entire fuel system. Ensures problem-free immobilization of vintage cars, convertibles, motorcycles, scooters, quads, lawnmowers, chainsaws, and other petrol-driven 2-stroke and 4-stroke engines. Increases operational safety. With long-term effect. 25 ml from the dosing device preserve 5 l fuel. Before decommissioning, add the appropriate quantity to the tank and allow the engine to run for approx. 10 minutes.
Fuel pre-filter. For fuel pumps with round cover. Almost all available fuel pumps of our catalog
are our own reproductions with removable cover. (round cover with 6 mm screw in the middle). Diameter about 41,4mm, bore 10,3mm.
Brake pipe bending pliers! Been suitable for sheet metal, copper, stealing and aluminum lines
Bends up to 90°. Suitable for pipe Ø: 3/16 " (4,75mm), 1/4 " (6,35mm), 5/16 " (7,93mm), 3/8 (9.52mm).
Blind plug - body plug conical, 8mm. For sealing or closing holes (cavity preservation). Good
resistance against corrosion, weathering, ageing, ozone, oils, petrol splashes and solvents. Contains no silicone (important for possible painting work). Super easy to use, no fiddling.
