Citroen-2CV / Alpine / crankshaft-camshaft-piston-flywheel

Alpine A110, piston + liner (4 item). Suitable for Alpine A110. Engine capacity: 1596cc. Bore: 77,8mm. Piston pin: 21 x 66,50mm. Piston rings: 1,75 +2 + 4,0mm. Outside diameter down: 82,50mm. Outside diameter above: 96,0mm. Height totally: 143,50mm.

Quality: 3

• Suitable for this article
• piston ring presenting pliers for diameter 40-100.
  20,73 €
• Piston ring compressor, 60 to 90mm clamping range. Hobby version (not for daily work).
  16,76 €

Connecting rod bearing set, 1 oversize (0,25). Suitable for Alpine A110 (1100cc).

Quality: 3

Connecting rod bearing set, 1 oversize (0,25). Suitable for Alpine A110 1300 (1255cc).

Quality: 3

Connecting rod bearing set, standard dimension. Suitable for Alpine A110 (1100cc).

Quality: 3

Connecting rod bearing set, standard dimension. Suitable for Alpine A110 1300 (1255cc).

Quality: 3

Connecting rod bearing set, standard dimension. Suitable for Alpine A110 1300 (1289cc).

Quality: 3

Alpine110, R12 Gordini, R17TS, piston + liner (4 pieces). Suitable for Renault alpine one 110, R12 Gordini, R17TS (R1313, R1323). Engine: 807 12/20. Engine capacity: 1564cc. Bore: 77mm. Piston pin: 21 x 65mm. Piston rings: 1,75 + 2 + 4,0mm. Outside diameter down: 82,50mm. Outside diameter above: 96,0mm. Height totally: 143,50mm.

Quality: 3

• Suitable for this article
• piston ring presenting pliers for diameter 40-100.
  20,73 €
• Piston ring compressor, 60 to 90mm clamping range. Hobby version (not for daily work).
  16,76 €

A310, piston (per piece). Suitable for Renault Alpine A310 V6. Engine: 112.7.30. Bore: 88,0mm. Piston pin: 23.5 x 72,0mm. Piston rings: 1,5 + 2.0 + 4,0mm.

Quality: 3

• Suitable for this article
• piston ring presenting pliers for diameter 40-100.
  20,73 €
• Piston ring compressor, 60 to 90mm clamping range. Hobby version (not for daily work).
  16,76 €
• A310, liner (per piece) Renault Alpine A310 V6. Engine: 112.7.30. Bore: 88mm.
  67,46 €

Alpine A310, piston + liner (4 item). Suitable for alpine A310 (4 liners). Engine capacity: 1605cc. Bore: 78,0mm. Piston pin: 22 x 66,25mm. Piston rings: 1,7 5+ 2 + 4,0mm. Outside diameter down: 82,50mm. Outside diameter above: 96,0mm. Height totally: 143,50mm.

Quality: 3 360°

• Suitable for this article
• piston ring presenting pliers for diameter 40-100.
  20,73 €
• Piston ring compressor, 60 to 90mm clamping range. Hobby version (not for daily work).
  16,76 €

Connecting rod bearing set, standard dimension. Suitable for Alpine A310 (1600cc).

Quality: 3

A310, liner (per piece) Renault Alpine A310 V6. Engine: 112.7.30. Bore: 88mm.

Quality: 3

• Suitable for this article
• piston ring presenting pliers for diameter 40-100.
  20,73 €
• Piston ring compressor, 60 to 90mm clamping range. Hobby version (not for daily work).
  16,76 €
• A310, piston (per piece). Suitable for Renault Alpine A310 V6. Engine: 112.7.30. Bore: 88,0mm.
  217,18 €

Liners sealing rings down, made of copper. Diameter: 62,5x70x1mm. Suitable for the following Renault liners. Our. No. 80059 (Renault + Dauphine). 80060 (R4, Estafette, Dauphine, Floride). Per piece.

Quality: 3

Piston ring set, per piston. Suitable for Renault engine: 841-843-C7-D7 (1647ccm). Bore: 79mm. Piston rings: 1,75mm + 2,0mm + 4,0mm. Renault R16, R18, Alpine A310.

Quality: 2

• Suitable for this article
• piston ring presenting pliers for diameter 40-100.
  20,73 €
• Piston ring compressor, 60 to 90mm clamping range. Hobby version (not for daily work).
  16,76 €

Liner gasket bottom (1 set). For V6 Euro engine (PRV) with 2664cc. Suitable for Peugeot 504 V6, 604 V6. Renault R30, R25 V6, Alpine A310.

Quality: 2

Liner gasket bottom (1 set). For V6 Euro engine (PRV) with 2849cc. Suitable for Peugeot 604 V6. Renault R30, R25 V6, Alpine A310.

Quality: 2

P 504V6, chain for the oil pump. Suitable for Peugeot 504 V6. Renault R30, Alpine V6. Wide one: 1 chain link, length: 44 chain links.

Quality: 2

P 504 V6, piston ring set (for 1 piston), for 6 liners. Engine: ZNJK. Engine capacity: 2849cc. Bore: 91mm. Piston rings: 1,5mm + 2,0mm + 4,0mm. Suitable for Peugeot 505 V6, 604 V6. Renault 30, Alpine V6.

Quality: 2

• Suitable for this article
• piston ring presenting pliers for diameter 40-100.
  20,73 €
• Piston ring compressor, 60 to 90mm clamping range. Hobby version (not for daily work).
  16,76 €

Piston rings for V6 engine. 2,7L. 88mm bore. Suitable for Peugeot 504 V6 Cabrio + Coupe. Peugeot 604 V6. Renault R30 + Alpine A310 V6. Complete set for 6 pistons! Dimension of piston rings: 1,5mm + 2,0mm + 4,0mm.

Quality: 2

• Suitable for this article
• piston ring presenting pliers for diameter 40-100.
  20,73 €
• Piston ring compressor, 60 to 90mm clamping range. Hobby version (not for daily work).
  16,76 €

P 504 V6/604 V6/R30/Alpinen 310 V6, connecting rod bearing set (bimetal), standard measurement of 60 mm, with stroke offset. Engines 2,7L + 2,85L.

Quality: 2

P 504 V6/604/Alpine A310 V6/R30, connecting rod bearing kit small (trimetal). 0,30 oversize. For 52mm crankshaft. Suitable for Peugeot 504 V6, 604 V6. Renault Alpine A310 V6, Renault R30.

Quality: 3

P 504 V6/604/Alpine A310 V6/R30, connecting rod bearing set small (trimetal). Standard dimensions. For 52mm diameter. Suitable for Peugeot 504 V6, 604 V6. Renault Alpine A310 V6, Renault R30.

Quality: 3 360°

P 504 V6/604/Alpine A310 V6/R30, crankshaft bearing set (V6 BRV). 0,30 oversize. Suitable for Peugeot 504 V6, 604 V6. Renault Alpine A310 V6, Renault R30. Made in France

Quality: 3

P 504 V6/604/Alpine A310 V6/R30, crankshaft bearing set (V6 BRV). Standard dimensions. Suitable for Peugeot 504 V6, 604 V6. Renault Alpine A310 V6, Renault R30. Made in France

Quality: 3

P 504V6/R30, camshafts shaft seal (left-hand rotation). Suitable for Peugeot 504 V6, 604 V6. Renault R30 V6, Citroen XM. Dimension: 32 x 45 x 8mm.

Quality: 2

R16/Alpine, camshaft with distributer propulsion. For Renault engine 807-841 + 843. Suitable for Renault R16 TS + R16 TX. R17 + R12 Gordini. Renault Alpine A110. New part.

Quality: 3

R16/R15/R12/Alpine, safety sheet for the fly wheel. Suitable for Renault, with 1600ccm engine. Or. No. 0608395100

Quality: 0

R16/R15/R17, thrust washer (thrust bearing) crankshaft. Standard size. Suitable for Renault R16, R15, R17. Renault Alpine (4 cylinders), Fuego, R20, Trafic. Engines: 697/807/821/843. Reproduction from the EU.

Quality: 3

R16R15/R17, crankshaft bearing set. 0,25 oversize. Suitable for Renault R16, R15, R17. Renault Alpine (4 cylinders), Fuego, R20, Trafic. Engines: 697/807/821/843. Reproduction from the EU.

Quality: 3

R16R15/R17, crankshaft bearing set. Standard size. Suitable for Renault R16, R15, R17. Renault Alpine (4 cylinders), Fuego, R20, Trafic. Engines: 697/807/821/843. diameter: 54,8mm, width: 20,50mm. Reproduction from the EU.

Quality: 3

R16R15/R17, connecting rod bearing set. 0,25 oversize. Suitable for Renault R16, R15, R17. Renault Alpine (4 cylinders), Fuego, R20, Trafic. Engines: 697/807/821/843. Reproduction from the EU.

Quality: 3

R16R15/R17, connecting rod bearing set. Standard size. Suitable for Renault R16, R15, R17. Renault Alpine (4 cylinders), Fuego, R20, Trafic. Engines: 697/807/821/843. Reproduction from the EU.

Quality: 3

R4/R5/R6/R8/R12, camshaft drive chain, 58 chain links, for Renault R4 R5/R6 R8/R12/TWINGO. Engines: C, C1C, C1E, 680, 688, 810, 813, 839, 899, 810-02, C3G700. Wide one: 1 chain link. (Simplex)

Quality: 2

• Suitable for this article
• Camshaft drive chain tensioner. For camshaft drive chain, with 58 links. Engine: C, C1C, C1E, 6
  34,61 €

R4/R5/R8/R10/Estafette, crankshaft bearing (5 bearings, C = Cleon). For crankshafts with 44mm diameter. 0,25 oversize. Suitable for Renault engines: 688, 689, 804, 810, 812. For engines until 1974! From 1975 on crankshafts with 54,8mm diameter were used.

Quality: 2

R4/R5/R8/R10/Estafette, crankshaft bearing (5 bearings, C = Cleon). For crankshafts with 44mm diameter. Standard size. Suitable for Renault engines: 688, 689, 804, 810, 812. For engines until 1974! From 1975 on crankshafts with 54,8mm diameter were used.

Quality: 2

R4/Estafette/Caravelle, connecting rod bearing set, 1 oversize (+0,25). Wide one: 20,75mm. Suitable for Renault engines (5 crankshaft bearings, Cleon) 688 172,688,1 + 688.01 to year of construction 1975 (1108cc). All other engines 689 710 / C1C 700 (956cc) + 688 711 + 713. C1E 700, 754, 715, 720, 750 (1108cc). 813-02 (852cc). These engines were used in Renault R4, R4F4, R4F6, etc.

Quality: 2

R4/Estafette/Caravelle, connecting rod bearing set, 2 oversize (+0,50). Wide one: 20,75mm. Suitable for Renault engines (5 crankshaft bearings, Cleon) 688 172,688,1 + 688.01 to year of construction 1975 (1108cc). All other engines 689 710 / C1C 700 (956cc) + 688 711 + 713. C1E 700, 754, 715, 720, 750 (1108cc). 813-02 (852cc). These engines were used in Renault R4, R4F4, R4F6, etc.

Quality: 2

R4/Estafette/Caravelle, connecting rod bearing set, standard dimension. (43.965 - 43,980mm). Width: 20,75mm. Suitable for Renault engines (5 crankshaft bearings, Cleon) 688 192 + 688 1 (1108cc) starting from year of construction 1975. Engine 810 01 to 810 29 (1289cc). 810 96 + 810 97 (1289cc). C1G + C1J (1397cc). These engines were used in Renault R4, R4F4, R4F6, etc.

Quality: 2

R4/R5/R8/R10/Estafette/Caravelle, connecting rod bearing set. Width: 17.70mm. 0,25 oversize. Fits Renault engines (5 crankshaft bearings, Cleon) with 54.8mm + 44mm diameter. Engines: 688 192 + 688.1 (1108cc). Engine 810.01 to 810.29 (1289ccm). 810.96 + 810.97 (1289ccm). 810 725, 810 726, 840 730, C2J 713, 8347 725.... C1G + C1J (1397ccm). Renault R4 (rarely used). Renault R5, R10, Estafette, R16 (all),....

Quality: 2

R4/R5/R8/R10/Estafette/Caravelle, connecting rod bearing set. Width: 17.70mm. 0,50 oversize. Fits Renault engines (5 crankshaft bearings, Cleon) with 54.8mm + 44mm diameter. Engines: 688 192 + 688.1 (1108cc). Engine 810.01 to 810.29 (1289ccm). 810.96 + 810.97 (1289ccm). 810 725, 810 726, 840 730, C2J 713, 8347 725.... C1G + C1J (1397ccm). Renault R4 (rarely used). Renault R5, R10, Estafette. R16 (all),.....

Quality: 2

R4/R5/R8/R10/Estafette/Caravelle, connecting rod bearing set. Width: 17.70mm. Standard size. Fits Renault engines (5 crankshaft bearings, Cleon) with 54.8mm + 44mm diameter. Engines: 688 192 + 688.1 (1108cc). Engine 810.01 to 810.29 (1289ccm). 810.96 + 810.97 (1289ccm). 810 725, 810 726, 840 730, C2J 713, 8347 725.... C1G + C1J (1397ccm). Renault R4 (rarely used). Renault R5, R10, Estafette, R16 (all),......

Quality: 2

R4, R8, Alpine, camshaft drive chain set, 58 chain links (simple - simplex chain), suitable for Renault R4, R8, Alpine 1300. Consisting of: Camshaft drive chain, chain pinion for crankshaft + camshaft, gear seal cap.

Quality: 3

• Suitable for this article
• Camshaft drive chain tensioner. For camshaft drive chain, with 58 links. Engine: C, C1C, C1E, 6
  34,61 €

R5 Alpine Turbo, piston + liner (4 item). Suitable for Renault R5 Alpine Turbo. Engine: 840.26. Engine capacity: 1397cc. Bore: 76mm. Piston pin: 20 x 62mm. Piston rings: 1,75 + 2 + 4,0mm. Outside diameter down: 80,60mm. Outside diameter above: 90,10mm. Height totally: 134mm.

Quality: 3

• Suitable for this article
• piston ring presenting pliers for diameter 40-100.
  20,73 €
• Piston ring compressor, 60 to 90mm clamping range. Hobby version (not for daily work).
  16,76 €

R5 Alpine Turbo, piston + liner (4 fittings). Suitable for Renault R5 Alpine Turbo. Engine: CI J 782/760. Engine capacity: 1397cc. Bore: 76mm. Piston pin: 20 x 63,50mm. Piston rings 1.75 + 2 + 4,0mm.

Quality: 3

• Suitable for this article
• piston ring presenting pliers for diameter 40-100.
  20,73 €
• Piston ring compressor, 60 to 90mm clamping range. Hobby version (not for daily work).
  16,76 €

R5 Alpine, piston + liner (4 item). Suitable for Renault R5 Alpine 1400 (R1223). Engine: 840. Bore: 76mm. Piston pin: 20 x 65mm. Piston rings: 1,75 + 2 + 4,0mm. Outside diameter down: 80,60mm. Outside diameter above: 90,10mm. Height totally: 134,0mm.

Quality: 3

• Suitable for this article
• piston ring presenting pliers for diameter 40-100.
  20,73 €
• Piston ring compressor, 60 to 90mm clamping range. Hobby version (not for daily work).
  16,76 €

Connecting rod bearing set. Suitable for Renault R5 Turbo (midengined). Diameter: 43,98mm. Wide one: 17,70mm.

Quality: 3

R5/R10/R12/R15, piston + liner (4 item). Renault engine 810 (1289cc). Suitable for Renault R5LS, TS, GTL. R5 Alpine. R10-1300. R12TS, LN, TR. R15TL, GTL. Bore: 73mm. Piston pin: 20 x 62. Piston rings: 1,75 + 2 + 4,0mm. Compression: 9,5:1. Outside diameter down: 78,41mm. Outside diameter above: 87,78mm. Height totally: 134,0mm.

Quality: 3

• Suitable for this article
• piston ring presenting pliers for diameter 40-100.
  20,73 €
• Piston ring compressor, 60 to 90mm clamping range. Hobby version (not for daily work).
  16,76 €

Shaft seal crankshaft 35 x 50 x 8. Suitable for Renault R4, Estafette, R5, R9, R11, R12, R15, R17, R19, R21, Nevada, Twingo, Clio, Rapid. Or. No. 7700859691

Quality: 3

Shaft seal crankshaft rear. Suitable for nearly all Renault engines. Also for V6 engines by Peugeot 504, 604. Renault R30, Alpine A310. Dimension: 80x100x8mm. Or. No. 7700859692

Quality: 3

Shaft seal crankshaft in front (35 x 50 x 10). Suitable for many Renault (R4, R5, R8, R10 R9, R12, R16, Fuego etc.). Or. No.7703087097

Quality: 2

Shaft seal crankshaft in front. Suitable for V6 Euroengine (PRV). Peugeot 504 V6. Peugeot 604 V6. Renault Alpine A310 V6, R30 V6. Dimension: 42 x 62 x 10mm.

Quality: 2