rear bumper for Citroën 2CV Dyane

Autosol chrome polish. 75 ml tube. (Premium chrome shine care). Autosol chrome polish has been

around for ages and has often been copied! Made in Germany.

M7, chassis nut (securement of the body). Suitable for Citroen 2CV (old version, with welded M7 nut)

M7, chassis nut (securement of the body). Suitable for Citroen 2CV (newer version with in-punched

thread)

Nut, high-grade steel, M7

Bumper rear wide, suitable for Citroen 2CV + Dyane. Reproduction from high-grade steel, without

adhesive strips! Our bumper 16514 is high polish! Made in Europe.

• Suitable for this article
• 
  Bumper mounting bracket rear from high-grade steel, for Citroen 2CV6 + 4. The
  38,58 €
• 
  Bumper corner rear, for Citroen 2CV6 (Plastic corner rear). Colour black. The
  9,82 €
• 
  Bumper mounting kit (screws) in the rear. Suitable for Citroen 2CV6, starting
  35,61 €

Bumper rear for Citroen 2CV (Dyane), out polished high-grade steel. Particularly for 2CV

manufactured. (High version). The bumper is manufactured into complex manual work and is polished then about 3 hours!

• Suitable for this article
• 
  Bumper mounting bracket rear from high-grade steel, for Citroen 2CV6 + 4. The
  38,58 €
• 
  Bumper corner rear, for Citroen 2CV6 (Plastic corner rear). Colour black. The
  9,82 €
• 
  Bumper mounting kit (screws) in the rear. Suitable for Citroen 2CV6, starting
  35,61 €

Bumper adhesive strip wide (black). Bumper rear, for 11cm high bumpers. Suitable for Citroen 2CV

V, Installed of year of construction 09/1974 to 07/1990. Made in Germany

Bumpers rubber grey rear, for Citroen 2CV. This rubber was mounted starting from 1963 to about 1975

instead of black adhesive strips and fits only on the low (7,6cm) high bumper.

• Suitable for this article
• 
  Rosette nickel plated. For 4mm screw. Outside diameter: 11mm. Height: 2,4mm
  0,75 €
• 
  M5x25, screw with countersunk head. E.g. suitable for the end pieces of the
  0,33 €

Bumpers rubber black rear, for Citroen 2CV. This rubber was mounted starting from 1963 to about

1975 instead of black adhesive strips and fits only on the low (7,6cm) high bumper.

• Suitable for this article
• 
  Rosette nickel plated. For 4mm screw. Outside diameter: 11mm. Height: 2,4mm
  0,75 €
• 
  M5x25, screw with countersunk head. E.g. suitable for the end pieces of the
  0,33 €

Bumper mounting bracket rear from high-grade steel, for Citroen 2CV6 + 4. The bracket is for the

high bumper. Installed from 09/1974 to 07/1990. Made in Germany.

• Suitable for this article
• 
  Bumper mounting kit (screws) in the rear. Suitable for Citroen 2CV6, starting
  35,61 €
• 
  Stainless steel bumper bolt (4x), suitable for Citroen 2CV. The bolts are
  8,19 €

Bumper mounting bracket rear for Citroen 2CV6 + 4. The bracket is for the high bumper. Installed

from 09/1974 to 07/1990. Electrolytically galvanized! Made in Europe.

• Suitable for this article
• 
  Bumper mounting kit (screws) in the rear. Suitable for Citroen 2CV6, starting
  35,61 €
• 
  Stainless steel bumper bolt (4x), suitable for Citroen 2CV. The bolts are
  8,19 €

Bumper mounting bracket rear, for Citroen 2CV6 + 4. The bracket is for the low (9cm) bumper

Installed from 1963 to 09/1974. Made in Europe.

• Suitable for this article
• 
  Bumper rear for Citroen 2CV. Low version. Installed from year of construction
  53,46 €
• 
  Bumper mounting kit (screws) in the rear. Suitable for Citroen 2CV6, starting
  35,61 €
• 
  Stainless steel bumper bolt (4x), suitable for Citroen 2CV. The bolts are
  8,19 €

Stainless steel bumper bolt (1x), suitable for Citroen 2CV. The bolt is supplied with M7 nut and

washer (Strie) (reproduction as original). Suitable for the front (2x) and rear (4x) bumpers. Per piece! The screw is also installed in the Citroen AMI6. It is located on the side of the front fender and is screwed to the front mask.

Stainless steel bumper bolt (1x), suitable for Citroen 2CV. The bolt is supplied without nut and

washer (reproduction). Suitable for the front (2x) and rear (4x) bumpers. M7 thread, cross recess! Per piece.

• Suitable for this article
• 
  Nut, high-grade steel, M7
  0,51 €