12 Volt assembly socket to conversion (suitable for a cigarette lighter)
Assembly orifice: 29mm. Depth: 48mm.
Citroen-2CV / Mehari /
1612 Articles | Page 1 of 33
2CV old/Mehari/HY, door lock, lockcylinder set for old 2CV + Mehari, HY
2x door lock (round pin) + 1x starter lock (angular pin)! With vehicles with starter button!
2CV, 602ccm, engine gasket set without shaft seals
Installed from year of construction 1961 to 1969. Suitable for Citroen 3CV, Dyane, Ami6. Engine M28/1.
2CV, Window handle outside on the left, for the door in front.
Mounting for the flap window). Reproduction.
2CV, Luggage compartment hood. Emblem "CITROEN" swung
from 3mm high-grade steel. Made in Germany by Franzose. The signature is about 180mm long, and 65mm highly. The emblems are fastened with 2x M3 nuts (our article number 20166).
2CV, Fender in front, retaining rubber fork, fender in front
For the securement of the fender on the chassis.
VIDEO
2CV, Fender in front, nut for the securement! With integrated rotatable washer
like in the first years of production. The lacquer will not be damaged if you tighten up the nut.
2CV, mirror glass with synthetic frame
Suitable for the original Citroen mirror. Fits on the left and on the right. Note: The mirror and the synthetic frame come from the original manufacturer. The mirror has the original thickness (there are reproductions, which break very easy)! The synthetic frame has the original holding pins. The change takes only 1-2 minutes. The problem of the mirrors is usually only that the glass become milky and the synthetic limit tears up.
2CV, mirror frame made of Sarlink
softer modern plastic from automobile production). Flexible, elastic-soft, high chemical resistance, durable. Suitable for left and right side. The colour corresponds to the light grey of the original mirrors (not like replicas, which are darker). Fitting is very easy and the mirror glass is held perfectly. A real small improvement.
2CV, mirror frame made of Sarlink, incl. mirror glass
softer modern plastic from automobile production. Flexible, elastic-soft, high chemical resistance, resistant). Suitable for left and right. The colour corresponds to the light grey of the original mirrors (not like replicas, which are darker). Mounting is very easy and the mirror glass is held perfectly. A real small improvement.
2CV, plate for the valve spring. Suitable for Citroen 2CV. Diameter: 30mm
Height over everything: 7,50mm. Or. No. AM124-11C
2CV, spring in the door lock, (fixed from rear in the door lock, door side)
In front + rear fitting.
2CV, Door lock, key blank
for Citroen 2CV starting from year of construction 9/1974, for vehicles without starter button! Shank lengthens: 17,3mm. Shank-wide: 7,0mm.
2CV, floorpan plate centrically for the original chassis of Citroen 2CV, Dyane
(semicircular recess). Made in Europe.
2CV6, 602ccm, engine gasket set inclusive. Shaft seals and ventil stem sealing
Suitable for Citroen 2CV6 starting from year of construction 1970 to 1990. Label quality
2CV6, 602ccm. Engine gasket set without shaft seals. For Citroen 2CV6
to production end) and 2CV4 with 435ccm engine. Label manufactor.
2CV, screening plate at the exhaust (simple reproduction)
for the protection the hand brake cable. Suitable for Citroen 2CV6 + 4. this sheet metal is mounted original at the 49mm clip at the front muffler. Made in Germany.
Screening plate at the exhaust, for the protection for the parking brake cable
Suitable for Citroen 2CV. This sheet metal is mounted original at the 49mm clip at the front muffler. The sreening plate have long holes, so it can be mounted the different versions of the 49mm clip.
2CV6, exhaust clip 47mm
for the securement front muffler down to the elbow pipe (S-pipe). Suitable for Citroen 2CV6 + 2CV4. Or.Nr.: AM1826B
2CV6, exhaust clip 47mm. The clip is extremely stable and from cast iron
The clip seizes completely around the cone of the exhaust and seals so much better. Suitable for Citroen 2CV6 + 2CV4.
2CV6, exhaust clip 49mm
for transition manifold to heat exchanger and transition heat exchanger to the front muffler. Suitable for Citroen 2CV6 + 2CV4.
2CV6, exhaust clip 49mm. The clip is extremely stable and from cast iron
The clip seizes completely around the cone of the exhaust and seals so much better. Suitable for Citroen 2CV6 + 2CV4.
2CV6, exhaust clip rear muffler. Specially strong U-shaped bracket clip
maximum diameter of the exhaust pipe: 36mm. Suitable for Citroen 2CV6.
2CV6, tail pipe securement rubber short
This rubber is for the centric securement. Hole spacing about 60mm. Suitable for Citroen 2CV6. Made in Germany.
Metal sleeve for the rubber strips, with which the exhaust pipes are fastened
Suitable for Citroem 2CV6 + 2CV4.
Regulated catalyst for 2CV6, with expert opinion, EU-Standard Euro 1G-Kat
Just for 2CV with disc brake.
2CV6, elbow pipe (S-Rohr), reproduction. Without mounting material
With welded cone! Suitable for Citroen 2CV6.
2CV6, elbow pipe (S-pipe). Good reproduction. Brand manufacturer from Europe
Without fixing material! Suitable for Citroen 2CV6 + 2CV4, Dyane, AMI and Mehari.
2CV6, rear muffler locking collar, from high-grade steel
Suitable for Citroen 2CV. (the bracket locates the rubber to the silencer). Or.Nr.: AM18388. Made in Germany.
2CV6, rear muffler locking collar, made of metal. Suitable for Citroen 2CV.
the bracket locates the rubber to the silencer). Or.Nr.: AM18388. Made in Germany.
2CV6, rear silencer (long silencer). Good reproduction
Brand manufacturer from Europe. Without mounting material! Suitable for Citroen 2CV6 + 2CV4, Dyane, AMI and Mehari.
2CV6, rear muffler. Optically as in the seventies Installed
Without mounting material! Suitable for Citroen 2CV6 + 2CV4. All connection diameters are the same.
2CV6, rear muffler rubber band
For the securement of the silencer at the floor pan on the Citroen 2CV6 + 2CV4.
2CV6, valve spring outside (large spring)
for inlet + exhaust valve Citroen 2CV6. Outside diameter: 31,5mm. Height: 47,5mm. Or. No. AM124-25A
1612 Articles | Page 1 of 33
Select your Citroen 
Please select your Peugeot 
Please select your Citroen Renault 
