for Citroën 2CV Mehari
Oil filler neck seal down. (Connector on the engine block). Suitable for Citroen 2CV4+6. center
hole diameter about 28,5mm. Connector center to center, about 49mm
Oil filler neck, suitable for Citroën 2CV6, Dyane 6, Mehari. (includes crankcase ventilation)
Made by 'Franzose/CiPeRe' in Europe. Good quality. The oil filler neck is a very important component. It regulates the pressure in the engine housing. Correct pressure in the engine housing prevents oil leakage from the engine and ensures reliable lubrication. Unfortunately, the rubber flaps (which regulate the internal pressure) inside the oil filler neck harden over the years (or due to synthetic oils). The only solution is to replace the oil filler neck.
Oil filter for Citroen 2CV. Original or brand supplier (Valeo or Mecafilter-Purflux). (No replica)
Suitable for Citroen 2CV + Visa 652, from model year 09/1971 on
Oil filter adapter screw for Citroen 2CV. For replacement to use of a larger oil filter in the
summer and a small oil filter in the winter. Scope of delivery: 1x adapter screw, 1x oil filter largely, 1x oil filter small.
Oil cooler line seal, from rubber. Per piece! The rubber seals the oil cooler line in the connector
in the engine block. Suitable for Citroen 2CV6 + 2CV4. Measurement: 10,5x13,6x12,5mm
Oil cooler tool (to loosen the union nut of the oil line that goes into the engine block). Suitable
for Citroen 2CV6 + 2CV4. Dyane, Mehari, AMI (it is possible to mount the oil cooler without dismantling the engine fan housing)
Oil line double seal M7 for the hollow bolt. (Connector of the oil line at the cylinder head)
Suitable for Citroen 2CV.
Oil line for 2CV6, significant reproduction from the European Union. Produced from cuprous nickel
(Oil line from the engine block to the cylinder heads)
Oil line fixture at the engine block. Suitable for Citroen 2CV. This fixture is laterally, mounted
below the ignition. Produced from high-grade steel. Made in Germany.
Oil line hollow bolt (extends, for defective thread) 2CV6, M7, for the screwed joint at the
cylinder head (small bore. 0,4mm). Length: 26mm. Thus a deeper thread can be bored, if the original thread is defective. High-quality reproduction from the European Union.
Oil line hollow bolt 2CV6, M7, for the connector at the cylinder head. (small bore 0,7mm). Lenght
18mm, like original. Significant reproduction from the European Union.
Oil line hollow bolt 2CV6, M7, for connector at the engine block. (large bore 2,0mm). Significant
reproduction from the European Union.
Suction screen engine oil, mounts in the oil pan. Reproduction. Suitable for 2CV6 starting from
year of construction 10/1970. Or.Nr.: AM2226A
Oil pump for 2CV6 (from year of construction 11/1970), inclusive Aluminum casing + cover plate
Made in Europe. The pump impeller is 10.5 mm heavily. For all 602cc engines. 2CV, Dyane, Mehari, AMI8.
Oil pump for 2CV6, reproduction, inclusive Aluminum casing. Pump impeller is 10.5 mm heavily. For
all 602cc engines. 2CV, Dyane
Sender for an auxiliary oil temperature instrument (VDO). The sender is mounted in place of the oil
drain screw. Suitable for Citroen 2CV.
Connecting rod bush for Citroen 2CV (not suitable for 2CV6). Inside diameter: 19,5mm, outside
diameter: 22,1mm, height length: 25mm
Connecting rod bush for Citroen 2CV6. Inside diameter: 20,0mm, outside diameter: 22mm, height
length: 25mm. Original No. 75420101
Positive cable (battery to starter motor). Overall length: 500mm. Cable diameter: 16mm². Made in
the European Union. Universal fitting.
Upholstery Cleaner, Deep cleaning foaming action, 500ml. Eliminates tough stains and soils like
oil, grease and tar spots.
Hog Ring Pliers for use with A7 Hog Rings (Part No 21049). Complete with automatic feed. Ideal for
continuous connections. Single handed operation. Ideal for upholstery on classic cars.
Hog ring plier for the mounting of coverings (workshop quality). With this pliers the hog ring`s
18420 are optimally treated.
Primary shaft (new), suitable for Citroen 2CV6 (disc brake). Not suitable for Citroen Dyane +
Mehari. Or. No. AM332 1E
Section rubber adhesive + covering adhesives, in a brush box 350ml. Indispensably with work on one
cover! Also premium for profile rubbers, full rubber, foam rubber, leather, lines, felt
