for Citroën 2CV Mehari
1648 Articles | Page 31 of 33
Valve grinding-in paste (engine valves in the cylinder head), 100ml box. The double box contains
pre-grinding paste (rough) and regrinding paste (fine).
- Suitable for this article
valve spring inside (small spring), for inlet + exhaust valve Citroen 2CV6 + 2CV4. Outside
diameter: 22,5mm. Height: 31,5mm. Or.Nr. AM124-9A
Valve guide inlet valve for Citroen 2CV6. Length: 47mm, outside diameter 12,5mm, inside diameter
8,00mm, fit above 10,5/11mm.
Valve spring cotter for Citroen 2CV6, final version. The valve stem has 3 grooves. Suitable for
inlet + exhaust valve. You need 2 pieces per ventil.
Carburetor sealing set (only seals), inclusive Seal under carburetor, for oval carburetor SOLEX
26/28/35 CSIC, SCIC. Suitable for Citroen 2CV starting from year of construction 1981, Dyane, AMI. Made in Germany.
Carburetor sealing set for Citroen 2CV4 + 2CV6. Dyane 4 + Dyane 6, AZU250, AKS, Mehari. Round
carburetor Solex 34 PICS 4-5-6-10.
Carburetor setting gauge. For the height adjustmenting from the carburetor float. Suitable for
Citroen 2CV6, Dyane 6, Mehari. For oval carburetor Solex 26/35. Made in Germany.
Carburettor oval (new part), for Citroen 2CV6, Solex 26/35. All carburettors are disassembled by
us, and the float level (float gauge) is adjusted. The carburetor is then mounted on a 2CV 6 engine and subjected to a test run. We then adjust the carburetor completely according to Citroen specifications. The carburettor is therefore ready for installation and requires only a minimum of adjustment to your engine. The workload of around 1.5 hours is already included in the sales price.
Carburetor repair set for Citroen 2CV4 + 2CV6. Dyane 4 + Dyane 6, AZU250, AKS, Mehari. Round
carburetor Solex 34 PICS 4-5-6-10. With carburettor jets.
Carburetor repair set for Citroen 2CV4 + 2CV6. Dyane 4 + Dyane 6, AZU250, AKS, Mehari. Round
carburetor Solex 34 PICS 4-5-6-10. Without carburettor jets.
Carburettor repair kit for oval carburettor (with carburettor jets), for Citroen 2CV6 ( up to year
1990), AMI8, Dyane 6. carburettor Solex: 26/35CSIC + 26/35 SCIC. Contents: Gaskets, float needle valve large (14mm key) + float needle valve small (11mm key), diaphragm accelerator pump, carburettor jet stage 2 (110 + 125), jet idle, CO regulating screw. Made in Europe
Carburettor repair kit for oval carburettor (without carburettor jets), for Citroen 2CV6 ( up to
year 1990), AMI8, Dyane 6. carburettor Solex: 26/35CSIC + 26/35 SCIC. Contents: Gaskets, float needle valve large (14mm key) + float needle valve small (11mm key), diaphragm accelerator pump
Carburettor repair kit for oval carburettor. Suitable for Citroen 2CV6, AMI8, Dyane 6, Mehari
Carburettor Solex: 26/35 CSIC + 26/35 SCIC. With this set, the original carburettor can be repaired (of course you need expert knowledge and peace of mind). The original carburettor will then be as good as new and will not need to be repaired again for the next 30-50 years. In addition, it is certainly much better than any replica carburettor.
Carburettor repair kit for round carburettor. Suitable for Citroen 2CV6, AMI8, Dyane 6, Mehari
Carburettor Solex: 34 PICS. With this set, the original carburettor can be repaired (of course, this requires expert knowledge and peace of mind). The original carburettor will then be as good as new and will not need to be repaired again for the next 30-50 years. In addition, it is certainly much better than any replica carburettor.
Carburetor jet for round Solex carburetor (fits not for oval carburetor). Suitable for Citroen 2CV
Dyane, Mehari, AMI. Bore: 125
Carburetor jet for round Solex carburetor (fits not for oval carburetor). Suitable for Citroen 2CV
Dyane, Mehari, AMI. Bore: 135
Carburetor jet for round Solex carburetor (fits not for oval carburetor). Suitable for Citroen 2CV
Dyane, Mehari, AMI. Bore: 150
Carburetor jet for round Solex carburetor (fits not for oval carburetor). Suitable for Citroen 2CV
Dyane, Mehari, AMI. Bore: 155
Carburetor jet for round Solex carburetor (fits not for oval carburetor). Suitable for Citroen 2CV
Dyane, Mehari, AMI. Bore: 160
Carburetor jet for round Solex carburetor (fits not for oval carburetor). Suitable for Citroen 2CV
Dyane, Mehari, AMI. Bore: 170
Carburetor jet for round Solex carburetor (fits not for oval carburetor). Suitable for Citroen 2CV
Dyane, Mehari, AMI. Bore: 175
Carburettor jet cleaning tool. Essential for carburettor maintenance and cleaning in your classic
car. The scope of delivery includes five stainless steel nylon brushes with diameters of 2, 3, 4, 5 and 7 mm and a brush length of 30 mm. Ten stainless steel cleaning needles with diameters of 0.7, 0.9, 1.1, 1.3 and 1.4 mm. A 4 mm Allen key and twelve round carbon steel files with diameters of 0.4, 0.5, 0.6, 0.7, 0.8, 0.9, 1.0, 1.1, 1.2, 1.3, 1.4 and 1.6 mm. A flat file is also included.
Seal under carburetor lightly, seal between distance plate and carburetor. Suitable for Citroen
2CV6 with oval carburetor. Quality after production from Europe.
Seal under carburetor, distance plate between intake manifold and carburetor. Suitable for Citroen
2CV to year of construction 1981, with round carburetor. Inside diameter 34mm. Made in Germany
Carburettor base gasket, spacer plate between intake manifold and carburettor. Suitable for Citroen
2CV6 with oval carburettor. Made in Germany. Thickness: approx. 9.0 mm. This plate, made in Germany, is manufactured in the same way as the original plate, with many layers of sealing paper soaked in resin and pressed together. There are also many carburettor plates made of plastic on the market, but these do not achieve the same level of insulation.
1648 Articles | Page 31 of 33
Select your Citroen 
Please select your Peugeot 
Please select your Citroen Renault 
