Der Franzose Automobiltechnik GmbH - www.franzose.de
Cart
Deutsch Englisch Französisch
Sichere Zahlöungen mit mollie

for Citroën 2CV Mehari

1656 Articles | Page 10 of 34
Shipping country Shipping country

Dyane/Mahari, left headlight housing, made of metal. Suitable for Citroen Dyane and Mehari. This

headlight housing is finally available again. It was used in the early years of construction for the Dyane (until 1978) and Mehari. After that, a model change was made and the headlight housings were switched to plastic.

Dyane/Mahari, right headlight housing, made of metal. Suitable for Citroen Dyane and Mehari. This

headlight housing is finally available again. It was used in the early years of construction for the Dyane (until 1978) and Mehari. After that, a model change was made and the headlight housings were switched to plastic.

Headlight mounting bolt (stud bolt with ball head 5mm). Thread: M5 x 0.8. Length: approx. 34 mm

The bolt is slotted at the end so that the headlight height can be adjusted with a screwdriver. Suitable for Citroen Dyane + Mehari. However, this bolt has also used in many French vehicles (Renault R4, Dauphine, Peugeot 203, 403, 404, etc.).

Dyane/Mehari, headlight inserts (2 pieces) original from Infasa in Spain. Suitable for Dyane +

Mehari up to year of construction 1978. Please note: The reflectors do not have a parking light! 1 pair of original headlight inserts, found in Spain. Not a reproductions from Asia, made in Spain. These headlights were stored in 1979 and forgotten. The headlights are much better made than the reproduction headlights. However, they may have accumulated dust during their long storage. Some of them also have dust on the reflector. However, this dust can be easily removed. Better to put in a little more work for better light. Of course, the headlights have a test mark. The headlights are so-called NOS spare parts (new old stock).

Dyane/Mehari, headlight insert left, original from Infasa from Spain. Suitable for Dyane + Mehari

up to the year of construction 1978. Please note: The reflector do not have a parking light! No reproductions from Asia, but made in Spain. These headlights were stored and forgotten in 1979. The headlights are much better processed than the reproduction headlights. However, they may have accumulated dust due to the long storage period. Some of them also have dust on the reflector. However, this dust can be easily removed. Better a little more work, but better light. Of course, the headlights have a test mark. The headlights are so-called NOS spare parts (new old stock).

Headlight insert on the left. Suitable for Citroen Dyane + Mehari, to year of construction 1978

(for headlamp casing made of metal!). Reproduction, with test characters.

360° VIEW

Headlight insert on the right. Suitable for Citroen Dyane + Mehari, to year of construction 1978

(for headlamp casing made of metal!). Reproduction, with test characters.

360° VIEW

Headlight insert, suitable for Dyane + Mehari. Installed starting from year of construction 1978

On the left + on the right fitting. Securement with 4 stud bolts. For a headlight fixture from synthetic. Reproduction, with test character.

Rivet nut assortment made of aluminium. Consisting of: 40x M3, 35x M4, 25x M5, 25x M6, 15x M8, 10x

M10. Rivet nuts are ideal for creating a thread in sheet metal. A typical example is the mirror assembly on the doors or on the fenders (often the old threads are worn out or torn out). You will find the suitable riveting pliers under the number 21082.

Rivet nut pliers for M3, M4, M6, M8. With 2 lever arms (2 hand operation) for relatively easy

insertion of rivets with optimum force transmission. You will find a suitable range of aluminium rivet nuts under our number 21083. Rivet nuts are ideally suited for creating a thread in sheet metal. A typical example is the mirror assembly on the doors or on the fenders (often the old threads are worn out or torn out).

Universal electric attachment kit for tow bars. Includes relay for French cars. 12 volts. 7-pin

socket. Additional control light. Hella flasher relay connection: terminal + = positive supply/terminal 30, corresponds to the + sign on the 2CV relay. Terminal C = output of the indicator relay to the front and rear indicators, corresponds to terminal C on the 2CV indicator relay! Terminal R = connection of the control light. Terminal R2 = connection of an additional control light. Terminal - = ground, must be bolted to the vehicle! The 2CV indicator relay does not have this connection!

Electronic ignition system 12 Volt - reproduction! Suitable for Citroen 2CV6. This ignition system

is a reproduction. It is not of the same high quality (both in terms of workmanship and the components used) as our 14300 ignition system, but this reproduction ignition system is still interesting for those who don't drive much. Because it is much better than the normal contact and condenser controlled ignition! It's your decision! However, we ourselves continue to ride with the 14300 ignition system, which has never let us down for over 18 years!

The '123\EVO' replaces the former 123\BLUE and is a further development. ( 123\EVOLUTIF ) It offers

rs many different advance curves, 5 for tuning with regular fuel, 5 for tuning with LPG/ethanol and 5 'standard'-curves as prescribed by Citroen for ALL two cyl.-engines, inclusive VISA-engines. The 123\EVO also offers : vacuum-advance, warm-up-advance, overheat-retard, spark-balancing, dwell-balancing, current-time-out, idle-speed-control.

PDF file available PDF FILE

Electronic ignition system 12 Volt. For Citroen 2CV6. This electronic ignition system is very easy

to install and no longer has any mechanical components that can wear out. There is no need for any maintenance work on the ignition. You will be thrilled! We have already sold more than 10000 systems. And if you want your 2CV to run even better, we recommend our ignition coil 14395. The ignition system is designed for original engines. (A79/1, M28, M28/1 engines).

PDF file available PDF FILE

Ignition coil special kit for 2CV. High-performance ignition coil, special for 2CV. This

hign-performance ignition coil "made by Franzose" is the solution to the well known problem of defective 2 cv ignition coil. No more bucking! No need anymore to have on bord an ignition coil for replacement! This high-performance ignition coil works in combination with electronic ignition (14300) as well as with ignition contacts warranting in both cases a reliable operating. A further advantage of this high-performance ignition coil is a much better start. This high-performance ignition coil has by 10 volts the same output as the normal ignition coil by 14 volts- This enables a much better start. When starting vehicle electrical system voltage decreases till approx.9-10 volts. At this level the high-performance ignition coil is already highly efficient. Because there is no high-resistance oil anymore between the primary wave and the secondary wave and thanks to safe plastic used this high-performance ignition coil has a long life expectancy. Content: mounting bracket, 2x ignition cable, 2x NGK ignition plug. CAUTION:our ignition coil is only compatible with our electronic ignition systems (items n°14300 + 14325). Other electronic ignition systems work with a different resistance what can destroy the ignition coil!

PDF file available PDF FILE

Ignition 123UNI is designed for all STANDARD 2CV, Dyane, AMI engines that were ever produced. The

appropriate advance-curve can be selected with a 16 position rotary-switch, behind an opening in the front of the housing. The unit will work on 6 Volt and on 12 Volt systems. The '123\UNI' is designed to work on '2CV' 9 hp, 375cc, A53, M4, A79/0, M28, A79/1 and M28/1 engines in conjunction with the stock black coil. (6 Volt type for 6 Volt battery, and 12 Volt type for 12 Volt battery) The dwell is automatically adjusted. Upon installation, the user has to check his engine plate ( "A", "AZ", "AM", "AYA", "AM2", "AYA2", "AK2", "A06/635", "A06/642", "AM2A" or "A06/664" ) and look in the manual which setting of the rotary-switch is appropriate. There also is a special setting for M28/1-engines running on LPG or on Ethanol, like 'E85' as used in Sweden. ( 'E85' contains 85 percent ethanol, and 15 percent standard fuel )

PDF file available PDF FILE

Spring rear, (small diameter, short spring) for the suspension pot. Suitable for Citroen 2CV

starting from year of construction 11/1971. Or.Nr.: AY4311

Spring in front, (small diameter, long spring) for the suspension pot. Suitable for Citroen 2CV

starting from year of construction 11/1971.

1656 Articles | Page 10 of 34
Shipping country Shipping country