Citroen-2CV / Other Peugeot / crankshaft-camshaft-piston-flywheel

Diesel, liner gasket bottom (4x). Suitable for diesel engine: XD85, TMD85, XD88, XDP88, XD4x88, XD90, XD4x90. For the following vehicles: Peugeot 403, 404, 504, J7. Citroen HY Diesel.

Quality: 3

Piston ring set, for 4 pistons. Suitable for HY Diesel. Peugeot 404 Diesel. Peugeot 504 Diesels, J7 Diesel. Engine: XD, XDP, TMD4.88. Bore: 88,0mm. Piston rings: 2,0 + 2.0 + 2.0 + 4,5mm.

Quality: 3

• Suitable for this article
• piston ring presenting pliers for diameter 40-100.
  20,73 €
• Piston ring compressor, 60 to 90mm clamping range. Hobby version (not for daily work).
  16,76 €

P 104/204/304, shaft seal differential on the left. Suitable for Peugeot 104, 204, 304, 305, 205. Suitable for all fuel + Diesel engines. Dimension:: 40 x 58 x 10mm. Or. No. 3121.09

Quality: 3

P 204/304/305, bottom liner seal (4x). Suitable for Peugeot 204, 304, 305. Only for XL5, XK5, XR5, XR5S engines.

Quality: 3

P 204/304/305, shaft seal 40 x 49.5 x 5,5-7mm, for the crankshaft at the front side. Suitable for Peugeot 204, 304, 305. For engine: XK5. Or. No. 2074.07

Quality: 2

P 404/403/504/J7, sealing ring for the liner, bottom (sealing in the engine block). Dimensions: 78.2 x 81.8 x 5.0mm. Suitable for Peugeot 403 (engine 8CV TN3). 404 (Engine 8CV + 9CV > 1970). 504 (XM1L8). J7 until 1970. Or. No. 0112.17. Made in Germany

Quality: 3

P 404/504, crankshaft bearing, oversize 0,30. Suitable for Peugeot 404, from year of construction 1970. Peugeot 504 (03/1971 - 10/1971). Peugeot 505 (09/1980 - 10/1981). J5 (03/1980 - 10/1981). J7 (09/1968 - 03/1980). For engines: XC5P, XC6, XC7, XC7P, XM7P, XN1, XN1P. 1618cc, 1796cc, 1971cc.

Quality: 3

P 404/504, crankshaft bearing, oversize 0,50. Suitable for Peugeot 404, from year of construction 1970. Peugeot 504 (03/1971 - 10/1971). Peugeot 505 (09/1980 - 10/1981). J5 (03/1980 - 10/1981). J7 (09/1968 - 03/1980). For engines: XC5P, XC6, XC7, XC7P, XM7P, XN1, XN1P. 1618cc, 1796cc, 1971cc. Diameter 58,9/58,0/56,7/56,65/54,4 width 29,5/21,5/29,3

Quality: 3

P 404/504, crankshaft bearing, oversize 0,80. Suitable for Peugeot 404, from year of construction 1970. Peugeot 504 (03/1971 - 10/1971). Peugeot 505 (09/1980 - 10/1981). J5 (03/1980 - 10/1981). J7 (09/1968 - 03/1980). For engines: XC5P, XC6, XC7, XC7P, XM7P, XN1, XN1P. 1618cc, 1796cc, 1971cc.

Quality: 2

P 404/504, piston pin bushing (4 pieces). Suitable for Peugeot 404, 504, 505, 604. Inside diameter: 22,5mm. Outside diameter: 24,4mm. Overall height: 27,0mm. Or. No. 0604.14

Quality: 3

P 404/504/505, liner gasket bottom. Fits Peugeot 404 from year of construction 01/1970 (engine XC7, CM7). 504/505 from 01/1971 (engine XM7, XN1, XN1A). J7 (engine XM7P + XC7P). Engines until year of construction 06/1984

Quality: 3

P 404/504/505, belt pulley on the crankshaft. Suitable for Peugeot 404, 504, 505. Or. No. 0515,46 + 0515E2. Diameter: 13,10cm. Outside diameter of the scroll seal: 45,35mm.

Quality: 3

P 404/504/505/J7, gear set for the camshaft drive chain. Consisting of: Gear wheel crankshaft (38 teeth) + gear wheel camshaft (19 teeth). Suitable for Peugeot 404, 504, 505, J7. Peugeot engines with the following engine capacity: 1618cc, 1796cc, 1971cc, 1995cc.

Quality: 3 360°

P 404/504/J5, connecting rod bearing screw. Suitable for Peugeot 404 Diesel, 504D, 505D, J7D, J9D. Suitable for engines 2,1L, 2,3L, 2,5L. Diameter: 10,25mm. Length: 58mm. Per piece. Or. No. 0607.16

Quality: 3

P 504 V6, piston ring set (for 1 piston), for 6 liners. Engine: ZNJK. Engine capacity: 2849cc. Bore: 91mm. Piston rings: 1,5mm + 2,0mm + 4,0mm. Suitable for Peugeot 505 V6, 604 V6. Renault 30, Alpine V6.

Quality: 2

• Suitable for this article
• piston ring presenting pliers for diameter 40-100.
  20,73 €
• Piston ring compressor, 60 to 90mm clamping range. Hobby version (not for daily work).
  16,76 €

P 504/505/604, liner gasket bottom (4x). Suitable for Peugeot 504 (engine XN2) + 604 + 505 (engine XN6). Outer diameter: 99.6mm. Inner diameter: 93.2mm.

Quality: 3

P 504/505/J5/C25, piston + liner (4 pieces), suitable for Peugeot 504, 505, J5, Citroen C25. For engine: XN1, XN1P, XN1T/2. bore: 88mm. Piston pin: 23 x 74mm. Piston rings: 1,5 - 2.0 - 4,0mm. Dimensions of the liner = outside diameter down: 93mm. Height totally: 136,20mm. Outside diameter above: 101,90mm. Height from downside to bulge (base) of the liner: 99,10mm.

Quality: 2

• Suitable for this article
• Piston ring compressor, 60 to 90mm clamping range. Hobby version (not for daily work).
  16,76 €

P 504/505/J5/J9. Piston ring set (for 1 piston), for XN1 engine (4 liners) + ZNJK engine (6 liners). Bore: 88mm. Piston rings: 1,5mm + 2,0mm + 4,0mm. Suitable for Peugeot 504 (4 liners + 6 liners), Peugeot 505, J5, J9.

Quality: 2

• Suitable for this article
• piston ring presenting pliers for diameter 40-100.
  20,73 €
• Piston ring compressor, 60 to 90mm clamping range. Hobby version (not for daily work).
  16,76 €

P 504/J5/J9. Piston ring set (for 1 piston), for XDP 4,90 Diesel engine. Bore: 90mm. Piston rings: 2,0mm + 2,0mm + 2,0mm + 4,5mm. Suitable for Peugeot 504, J5, J9.

Quality: 2

• Suitable for this article
• piston ring presenting pliers for diameter 40-100.
  20,73 €
• Piston ring compressor, 60 to 90mm clamping range. Hobby version (not for daily work).
  16,76 €

Shaft seal for the camshaft. Dimension: 35 x 50 x 8. Suitable for Peugeot Diesel engines: XUD7, XUD9, XUD11 to year of construction 01/1994. Or. No. 0236.14

Quality: 3

Shaft seal camshaft. Dimension: 16 x 21 x 4,5. Suitable for Peugeot J5 petrol. Citroen C25 petrol. Peugeot 504 2.0 petrol. Peugeot 504 Diesel (1.9 + 2.3). Peugeot 505 petrol + Diesel. Peugeot J7 Diesel.

Quality: 2

Camshaft drive chain tensioner. Suitable for diesel engines: Peugeot 404, 504, 505, J7, J9, Tagora. Citroen HY. Or. No. 0849.04

Quality: 3 360°

Camshaft drive chain tensioner. Suitable for Peugeot 403, 404, 504, 505, 604, J7, J9. Engines: XB2, XB5, U6, U8, XC5, XC7, XM7, XN1, KF5, KF6, XN1, XN2, XNA, XN6, SRI, XM, XM7, XN1P. Or. No. 0849.06

Quality: 2

Camshaft drive chain, 58 chain links (duplex, double chain). Suitable for Peugeot 404, of year of construction 1960 to 1974. Peugeot 504, 505, 604, J7, J9, Renault R5. Engines: U6, U8, XC5, XC7, XM7, XN1, KF5, KF6, XN1, XN2, XNA, XN6, SRI, XM, XM7, XN1P. Or. No. 0816.07

Quality: 3

Camshaft drive chains gear wheel. Suitable for Peugeot 304, 304S, 305. Number of teeth: 38. For simplex camshaft drive chain. Branded article! Or. No. 0805.13.

Quality: 2

Cam follower (diameter: 23,98mm). Suitable for petrol engines: Peugeot 403, Peugeot 404, Peugeot 504, Peugeot J7. Diesel engines: Peugeot 404, Peugeot 504, Peugeot 505, Peugeot 604, Peugeot J7. Citroen HY. Or. No. 0942,13 + 7910031879. Please compare the dimensions!

Quality: 3

Push rod for inlet + exhaust (6.5 x 242,5mm). Suitable for diesel engines: Peugeot 403D, Peugeot 404D, Peugeot 504D, Peugeot 505D, Peugeot J7D. Citroen HY CD. per piece. Or. No. 0940.08

Quality: 3

Push rod inlet (6.75 x 181,1mm). Suitable for petrol engines: Peugeot 403, Peugeot 404, Peugeot 504, Peugeot 505, Peugeot J7. Or. No. 0939.03

Quality: 4

Plug screw in the crankshaft. Dimension: M24 x 1,5. Suitable for Peugeot 204, 304, 305, 404, 504, 505. Or. No. 0507.06

Quality: 3

Plug screw crankshaft. Suitable for Peugeot 404, 504, 505. Thread: M22 x 1,5. 050706

Quality: 3