engine block for Citroën 2CV Visa

Engine sealing compound grey, to 340°, 85ml, silicone basis. Optimally for oil pans, valve cap

valve timing cover. Very good quality. Made in Germany.

• Suitable for this article
• 
  Scrapers professional version, to remove of labels on disks, engine sealing
  19,34 €
• 
  Scraper spare blades for 20484 (5 St)
  6,84 €

HYLOMAR engine sealing material, permanent elastic engine sealing, indispensable with engine

e overhaul, 80ml. Hylomar M is temperature resistant between -50°C and +250°C and can be applied for sealing sealing surfaces and threaded pieces.

Oil drain screw (engine + gearbox) suitable for Citroen 2CV, DS, HY, GS. Thread M16.

• Suitable for this article
• 
  Gasket for oil drain plug for 2CV6, BX, XM, 204, 203, 304, 404, 504. inlet +
  0,48 €
• 
  Oil drain screw with valve. Thread M16 x 1,5. This valve is mounted instead of
  31,14 €
• 
  Hose (25cm) for the oil drain screw with valve (10636). Thread: M22 x 1,5.
  34,61 €

Oil drain screw with valve. Thread M16 x 1,5. This valve is mounted instead of the original oil

drain screw. Simply remove protecting cap - tighten hose - then the valve opens. Protecting cap mount - valve closed. Everything without tool. No dirty and burned hands. No oil on the floor. 10637 is a neccesary item. And only 1 time mounting. That preserves the thread in the oil pan (those are often no longer supplyable). Completely manufactured in Germany! The thread M16 x 1.5 was Installed in: Citroen 2CV, DS, HY, 11CV, GS. Nearly all classical Peugeot (403, 404, 504, 304, 204)

• Suitable for this article
• 
  Gasket for oil drain plug for 2CV6, BX, XM, 204, 203, 304, 404, 504. inlet +
  0,48 €
• 
  Hose (25cm) for the oil drain screw with valve (10636). Thread: M22 x 1,5.
  34,61 €

Hose (25cm) for the oil drain screw with valve (10636). Thread: M22 x 1,5.

• Suitable for this article
• 
  Oil drain screw with valve. Thread M16 x 1,5. This valve is mounted instead of
  31,14 €

Gasket for oil drain plug for 2CV6, BX, XM, 204, 203, 304, 404, 504. inlet + exhaust screw

measure: 16,3x22x2mm. Version C, curved with a seal inside. (PTFE)

Oil pressure switch. Thread: M18 x 1,5. Suitable for Peugeot 203 + 403. Peugeot 104, 204, 304, 404

Citroen VISA. Response pressure: 0,6 bar. Or. No. 1131.04 . Due to the design, there is always a drop of oil at the electrical connection. Alternatively, the modern oil pressure switch 70733 can be installed.

• Suitable for this article
• 
  Oil pressure switch Peugeot. Suitable for Peugeot 104. 203, 204, 304, 305, 403
  12,79 €

Identification plate orange, for Citroen. 78x40mm. 2 bores. (Metal). The red identification plates

were often used for engine numbers!