for Citroën 11CV-15CV
1262 Articles | Page 13 of 26
Degreaser for radiator. For cleaning and degreasing of copper and aluminium radiators. Use: mix 1
kg degreaser in 10 liters warm water. After draining of cooling water fill in radiator with degreasing water: After driving (1-2 days)please drain degreasing water and flush the cooling system with hot water before refilling it. Caution: the cleaning process may uncover some leakages!
Descaling agent for radiators. For decalcifying of copper and aluminium radiators. Use: mix 1 kg
softening agent in 10 liters warm water. After Draining of cooling water fill in radiator with decalcifying: After driving (1-2 days)please drain softening agent water and flush the cooling system with hot water before refilling it. Caution: the cleaning process may uncover some leakages!
Radiator Fin Straightener. Designed for straightening fins and removing debris from vehicles
radiators and air conditioning condensers. One tool with 6 different combs works on any vent or grill. The use of this tool allows the radiator or air conditioning grill to work correctly. Also use on air conditioning grills. Also suitable for oil and water radiators/condensers and evaporators
Radiator hose above. Suitable for Citroen 15CV (6 liners). Dimension: 140 x 90mm. Inside diameter
both sides: 43mm. Or. No. 329809
Clutch set complete for Citroën 11CV. Improved high quality clutch reproduction. Replacement for
original clutch. No technical modification required. Very same weight as original clutch. Hardened pressure plate and driving disc are made in Germany. Good quality and easy fitting stop ring alignement. Release level with reinforced ball-bearing. Clutch disk: 215mm. Splines inside: 21mm. Splines outside: 25mm. 8 teeth.
Clutch Alignment Tool, Universal. For single plate clutches. Suitable for flywheels with or without
pilot bearing. Fast to fit and remove. Universal applications. Size of collets: 14mm to 28mm across 3 adaptors. Cone size range from 35mm < 67mm (for almost all classical french cars)
Clutch cable, suitable for Citroen 11CV BL, up to year of construction 07/1952. Or. No. 543419
Diameter eye: 8,0mm. Over all length: 680mm. Casing covering: 410mm.
Clutch cable, suitable for Citroen 11CV BN, up to year of construction 07/1952. Or.Nr.543420, eye 8
mm in diameter, length over everything: 750 mm. Casing covering: 525 mm.
Crankshaft bearing (complete set), standard dimension. Suitable for Citroen 11CV with Perfo +
D-Engine, of year of construction 1937 to 1957. Citroen U23. Or. No. 45130A
Crankshaft bearing (complete set). 0.25 oversize. Suitable for Citroen 11CV with Perfo + D-Engine
of year of construction 1937 to 1957. Citroen U23 (van). Made one in France.
Crankshaft bearing 0.50 oversize. Suitable for Citroen 11CV D + 11CV Perfo, of year of construction
1936 to 1957. Citroen U23. Or. No. 45130C
Bearing bush with rubber, for the steering column at the top. Suitable for Citroen 11CV + 15CV
Citroen HY, to year of construction 1965. Dimension: 36.7 x 22.5 x 30mm. Or. No. 604129 + 604130
Lamp plug that comes on the Bilux or H4 bulb. The plug also has a socket for a Sofitte at the same
time. If a vehicle needs to be retrofitted with parking lights, this plug can be used. Just drill a hole in the reflector, lay a new cable and you're done. Universal fitting!
Liner sealing ring down. Suitable for Citroen 11CV, 15CV, ID19, HY. Standard measurement of 0,07mm
Inside diameter: 83,5mm. Outside diameter 95mm. Or. No.: D1113A
1262 Articles | Page 13 of 26
Select your Citroen 
Please select your Peugeot 
Please select your Citroen Renault 
