for Citroën 11CV-15CV

Mirror glass for the inside mirror. Suitable for Citroen 11CV. Dimension: 125 x 54mm. Or. No. 216160

Spiral over the brake line (protection). Suitable for Citroen 11CV. Length: 1000mm. Or. No.551020.

Cotter Pin Assortment, 555 pcs

Circlips (shaft retaining rings) range 3-32mm. Outside! 300 pieces!

Circlips (shaft retaining rings) range 3-32mm, inside. 300 pieces!

Spray adhesive, 500ml. Very useful for affixing of interior lining, damming mats, hoods etc. High

adhesive. We have been searching for a long time since we found a really good one.

spray paint rim silver 500ml

• Suitable for this article
• 
  Handhold for lacquer aerosol spray. Facilitates exactly and controlled alloting
  11,81 €

heat-resistant spray paint till 650°C 400ml, colour silver

• Suitable for this article
• 
  Handhold for lacquer aerosol spray. Facilitates exactly and controlled alloting
  11,81 €

heat-resistant spray paint till 800°C 400ml, colour anthracite

• Suitable for this article
• 
  Handhold for lacquer aerosol spray. Facilitates exactly and controlled alloting
  11,81 €

heat-resistant spray paint till 800°C, 400ml, colour black

• Suitable for this article
• 
  Handhold for lacquer aerosol spray. Facilitates exactly and controlled alloting
  11,81 €

spray paint black brilliant 500ml

• Suitable for this article
• 
  Handhold for lacquer aerosol spray. Facilitates exactly and controlled alloting
  11,81 €

spray paint black matt 500ml

• Suitable for this article
• 
  Handhold for lacquer aerosol spray. Facilitates exactly and controlled alloting
  11,81 €

Trakrite Wheel Alignment Gauge. Trakrite is the simplest, most accurate device for checking the

alignment of the steered wheels of car and light commercials. It is a roller bearing platform over which one front wheel is slowly driven with the wheels in their straight ahead position.

Tie rods + tie rod end separator. Suitable for Citroen 2CV, DS, 11CV, 15CV. Renault R4, R5. Peugeot

404 etc. clamping range 16-18mm. Opening 19mm!

Tie rod pin set (for 1 side). Suitable for Citroen 11CV. Dimension: 25 x 78mm. Or. No. 601876 +

601846

Tie rod end splitter (max. 23 mm fitment), workshop quality.

Starting pilot, 200ml. Brings tired engines to running, e.g. after long holding time.

Dust cap from rubber, for the vent screw at brake calipers and wheel brake cylinders. Universal

suitable for Citroen, Peugeot, Renault.

Dust cap brake piston. E.G. wheel brake cylinders in front Citroen 11CV (1.25 inch). Also suitable

for other vehicles with 1,25 inch piston. (30,75mm)

• Suitable for this article
• 
  Brake cylinder paste. Manufacturer: FÖRCH. 5g brake cylinder paste for
  5,31 €

Dust cap wheel brake cylinder, for piston diameters: 7/8 inch (22,25mm). Suitable for Citroen HY

11CV, 15CV, 2CV. Also universal fitting for other vehicles! Made in France

• Suitable for this article
• 
  Brake cylinder paste. Manufacturer: FÖRCH. 5g brake cylinder paste for
  5,31 €

Dust cap, for the large wheel brake cylinders in front (31.75mm). Suitable for Citroen 15CV + HY.

• Suitable for this article
• 
  Brake cylinder paste. Manufacturer: FÖRCH. 5g brake cylinder paste for
  5,31 €

Plug socket, metall, seven poles, at trailer towing coupling

• Suitable for this article
• 
  Metal plug, seven poles, for the trailer
  10,81 €

Stud bolt M7 on M8. 45mm lengths. Special production!

• Suitable for this article
• 
  copper nut M7 for exhaust system ! For exhaust system and outlet manifold
  1,46 €

M7, stud bolt M7x28. (e.g. screening plate on manifold Citroen DS). Or. No. ZC9616135W

• Suitable for this article
• 
  copper nut M7 for exhaust system ! For exhaust system and outlet manifold
  1,46 €

Stud bolt M7x43mm (thread M7x1). This stud bolt are installed, for example, at the exhaust elbow

with Citroen 15CV. Elbow pipe Citroen DS, etc. Universally fitting!

• Suitable for this article
• 
  copper nut M7 for exhaust system ! For exhaust system and outlet manifold
  1,46 €

Stud bolt M8 on M10. 38mm lengths. Special production!

• Suitable for this article
• 
  M8, copper nut, for 12mm open end wrench. For exhausts + exhaust manifolds.
  0,94 €
• 
  M8, copper nut M8, for 13mm tool. Universal suitable e.g. for exhausts +
  0,88 €

stud bolt M8x35

• Suitable for this article
• 
  M8, copper nut, for 12mm open end wrench. For exhausts + exhaust manifolds.
  0,94 €

Stud bolt M8x45, e.g. elbow securement Citroen DS.

• Suitable for this article
• 
  M8, copper nut, for 12mm open end wrench. For exhausts + exhaust manifolds.
  0,94 €

stud bolt M8x55

• Suitable for this article
• 
  M8, copper nut, for 12mm open end wrench. For exhausts + exhaust manifolds.
  0,94 €

stud bolt M8x62

out turner for studs for 7mm bolts, profi quality of Facom

out turner of studs for 9mm bolts, profi quality of Facom

Stud bolt set, for the securement the exhaust elbow. Suitable for Citroen 11CV PERFO + 11D.

stone guard MOTIP, colour grey for spray gun, 1000ml

Camshaft drive chain duplex, 66 chain links. Suitable for Citroen 11CV, 15CV, ID19, DS19, HY

1911ccm to year of construction 1966. Original quality!

Timing chain tensioner, suitable for Citroën ID19. Citroën 11CV + 15CV. Citroën HY. Dimensions

114x29mm. Or. No. 461256S. But beware: think carefully before installing the chain tensioner. Because the chain will inevitably rub against the chain tensioner (metal on metal = abrasion). We would rather drive without a chain tensioner and replace the timing chain more often.

Spur gear largely. 38 teeth. 27,6mm. Suitable for Citroen 11CV D, starting from year of

construction 10/1954. Citroen ID 19 + HY. Or. No. 457347

• Suitable for this article
• 
  Engine sealing compound grey, to 340°, 85ml, silicone basis. Optimally for oil
  5,15 €
• 
  Valve timing cover - seal (material: Paper). Suitable for Citroen 11CV
  6,24 €

Spur gear small. 19 teeth. Suitable for Citroen 11CV, all years of construction. Citroen ID 19 +

HY. Or. No. 461178

• Suitable for this article
• 
  Engine sealing compound grey, to 340°, 85ml, silicone basis. Optimally for oil
  5,15 €
• 
  Crankshaft nut (spur gears nut) 36x150. Suitable for Citroen 11CV. Wrench 46mm
  6,84 €
• 
  Valve timing cover - seal (material: Paper). Suitable for Citroen 11CV
  6,24 €

Spur gear set, suitable for Citroen 11D, ID19, DS19, HY. 38 teeth. Or. No. 457347 + 461178

• Suitable for this article
• 
  Engine sealing compound grey, to 340°, 85ml, silicone basis. Optimally for oil
  5,15 €
• 
  Crankshaft nut (spur gears nut) 36x150. Suitable for Citroen 11CV. Wrench 46mm
  6,84 €
• 
  Valve timing cover - seal (material: Paper). Suitable for Citroen 11CV
  6,24 €

Valve timing cover - seal (material: Paper). Suitable for Citroen 11CV (D-Engine). Citroen ID19

Citroen HY. Or. No. 451762. Made in Germany.

• Suitable for this article
• 
  Engine sealing compound grey, to 340°, 85ml, silicone basis. Optimally for oil
  5,15 €

Valve timing cover seal from cork. Suitable for Citroen 11CV PERFO engine + Citroen DS19. Or. No

451374

Shock absorber (2 pieces) oil pressure, for the rear axle. Suitable for Citroen 11CV + 15CV. Or

No. 354398A. Made in France

Shock absorber (2 pieces) oil pressure, for the front axle. Suitable for Citroen 11CV + 15CV. Or

No. 354396. Made in France

Cam follower with bore, suitable for Citroen 11CV + 15CV. Measurements: 26 x 50 x 9mm. Or.Nr.451513

Push rod, suitable for Citroen 11CV, with PERFO engine. Length 240mm. Or. No. 461849

Push rod, suitable for Citroen 15CV. 252mm long. Or. No. 451633

Bumper rear, first version. "CITROEN" emblem (signature), which is mounted between the two trims

The signature is out of sheet metal. Installed at Citroen 2CV up to year of construction 1961. Also partly at Citroen 11CV + HY.

Bumper mounting bracket in front on the left. Suitable for Citroen 11CV. Dimension: 430 x 187mm

Or. No. 299807

Bumper mounting bracket in front on the right. Suitable for Citroen 11CV. Dimension: 430 x 187mm

Or. No. 299806

Bumper overrider chrom-plated. Suitable for Citroen 11CV + 15CV. Or. No. 299317