for Citroën 11CV-15CV
1254 Articles | Page 4 of 26
Indicator - buzzer. 12 V. Fits universal. So you never forget to turn off the switch from the
indicator. Simple assembly: Connection: Parallel from the connection of the flasher relay (for flash control light) to the control light connection.
Turn signal cap in front on the left. Color: white. Suitable for Citroen 11CV + 15CV, starting from
year of construction 07/1952. Or. No. 706314
Turn signal cap in front on the left. Suitable for Citroen 11CV, starting from year of construction
07/1952. Citroen 15CV. Color: orange + black. Or. No. 803810
Turn signal cap in front on the right. Color: white. Suitable for Citroen 11CV + 15CV, starting
from year of construction 07/1952.
Turn signal cap in front on the right. Suitable for Citroen 11CV, starting from year of
construction 07/1952. Citroen 15CV. Color: orange + black.
6-volt electronic flasher relay. Power output from 10 watts to 110 watts! Branded product. This
flasher relay is universally applicable for classic cars with 6-volt on-board voltage (Citroën 2CV, DS, HY, Renault R4, Renault with rear engines). It can also be used for operation with a trailer coupling!
Flasher relay for trailer operation, 12 volts. French version! Pin assignment for French: Power
supply symbol (+). Front and rear indicator connection = C symbol. Dashboard control light = R symbol. Additional control light connection = R2. Negative ground = -. If a Japanese relay is used: Plus + = X or B symbol. Connection of these indicators C = symbol L. Connection of control R = symbol P. Connection of German relay: 31 = ground = must be laid. 49 = input voltage = +. 49a = output voltage to indicator = R. C = control light = C. C2 = additional control light for trailer operation
PDF FILE 
Flasher relay, 12 V, 3 plug connections. 180 Watt power output. Suitable for Citroen 2CV, DS, HY
Renault R4, Peugeot 203, 403, 404 etc. The flasher relay does not make "click-click" noises. Connection French: Current supply symbol (+). Connection indicator in front + rear = symbol (C). Connection control light dashboard = symbol (R). If a Japanese relay is used: Plus + = symbol X or B. Connection indicator C = symbol L. connection control of R = symbol P.
Bolt in the steering gear. (2x bolts, 3x seat shell). Repair kit, ball diameter 25mm. The bolts
take up the tie rods. Suitable for Citroen 11CV + Citroen HY, from year of construction 1948 to 1965. Or. No. 601847, 601849, 601836
Accelerator and Brake Pedal depressor. Convenient tool for one-man operations. For depressing the
brake pedal, e.g. wheel alignment jobs, checking brake lights or trailor brakes. For depressing the accelerator, e.g. setting the engine spped or measuring omissions. 1 men operation. Finely adjustable, with high-speed release function!
Brake + hydraulic line. Diameter: 4,75mm (3/16 inch). Length: 5m. Material: Kunifer (copper
nickel alloy, simple to bend. Kunifer does not rust). Clinch screws order seperate!
Brake + hydraulic line. Diameter: 6mm. Length: 5,0 meter. Material: Kunifer (copper - nickel alloy
simple to bend. Kunifer does not rust). Clinch screws order seperate!
Brake + hydraulic line. Diameter: 6,35mm. Length: 5,0 meter. Material: Kunifer (copper - nickel
alloy, simple to bend. Kunifer does not rust). Clinch screws order seperate!
Brake + hydraulic line. Diameter: 7,95mm (5/16 inch). Length: 5 meter. Material: Kunifer (copper
nickel alloy, simple to bend. Kunifer does not rust). Clinch screws order seperate!
Brake shoes set in front (new parts). Suitable for Citroen HY, to year of construction 02/1962
Wide one: 45mm. Note: New parts, an old part return is not necessary! Made one in European Union. Or. No. HY451-018
Brake shoe linings (rear suitable), to rivet. Suitable for Citroen 11CV. Installed at the front
axle to year of construction 1938. Installed at the rear axle until 1957. 1 set is for 1 axle. Consisting of: 2x lining 227mm + 2x lining 145mm. Or. No. 438016A
Brake shoe linings in front, to rivet. Suitable for Citroen 11CV, with 12 inch drum (304,8mm). (1
set = suitable for 1 axle). Or. No. 438016
Brake fluid DOT4. 1 liter. Manufacturer ATE. Suitable for all Citroen 2CV to year of construction
1981 (vehicles with drum brake in front). Citroen 11CV, HY. All Peugeot and Renault models.
Brake fluid DOT4. 1/2 liter. Manufacturer TOTAL. Suitable for all Citroen 2CV to year of
construction 1981 (vehicles with drum brake in front). Citroen 11CV, HY. All Peugeot and Renault models.
Brake fluid DOT4. 5,0 liter can. Manufacturer TOTAL. Suitable for all Citroen 2CV to year of
construction 1981 (vehicles with drum brake in front). Citroen 11CV, HY. All Peugeot and Renault models.
Brake fluid reservoir from glass. Glass height: about 115mm. Inclusive fixture from high-grade
e steel. Suitable for Citroen 11CV + Citroen HY.
Brake fluid reservoir connection rubber. For the connection from the glass container to the master
brake cylinder. Dimension: Diameter above: about 20-21mm. Diameter down: about 12mm. Inside diameter down: 6.0mm. This system of the securement was used by many france classic car`s. E.G. Citroen 11CV + 15CV, Citroen HY, Citroen Ami. Peugeot + Renault.
Brake fluid reservoir connection rubber. For the connection from the glass container to the master
brake cylinder. Dimension: Diameter above: about 20-21mm. Diameter down: about 12mm. Inside diameter down: 8.0mm. This system of the securement was used with many französichen car. E.G. Citroen 11CV + 15CV, Citroen HY, Citroen Ami. Peugeot + Renault.
Brake pipe + hydraulic pipe connector, for 4,5mm pipes. This connector operates with cutting rings
A brake pipe flaring machine is not necessary. Or. No. 1D5426236B
Brake line + hydraulic line connector, for lines with 3,50mm diameters. Suitable for Citroen 2CV
Citroen DS, Citroen HY etc. The connector operates with cutting rings. No Brake line flaring tool are required! There are pipes with 3,50mm + 3,75mm diameter. For 3,75mm you require the connector 32349!
Brake line + hydraulic line connector, for lines with 3,75mm diameters. Suitable for Citroen 2CV
Citroen DS, Citroen HY etc. The connector operates with cutting rings. No Brake line flaring tool are required! There are pipes with 3,75mm diameter. For 3,50mm you require the connector 32388!
Brake line + hydraulic line connector, for lines with 4,75mm diameter. Suitable for Citroen 2CV
Citroen DS, Citroen HY etc. The connector operates with cutting rings. No Brake line flaring tool are required!
Brake line + hydraulic line connector, for lines with 6,35mm diameter. Suitable for Citroen 2CV
Citroen DS, Citroen HY etc. The connector operates with cutting rings. No Brake line flaring tool are required!
Stop light switch, suitable for Citroen 11CV/15CV, to year of construction 07/1952. Citroen HY, to
year of construction 1963. Or. No. 712376
Brake hose rear, suitable for Citroen 11CV, to year of construction 1957. Renault Juva rear
Thread: 11/16 16. Length: 148mm. Made in Spain.
1254 Articles | Page 4 of 26
Select your Citroen 
Please select your Peugeot 
Please select your Citroen Renault 
