oil feed, oil cooling, oil filter for Citroën 2CV4
36 Articles
Oil drain screw magnetically, suitable for Citroen 2CV, HY, DS, 11CV (with oil pan out of sheet
metal). Interior square. The suitable tool has our number 20221. Or. No. A1321M, thread M16x1,5x20
Oil drain screw with valve. Thread M16 x 1,5. This valve is mounted instead of the original oil
drain screw. Simply remove protecting cap - tighten hose - then the valve opens. Protecting cap mount - valve closed. Everything without tool. No dirty and burned hands. No oil on the floor. 10637 is a neccesary item. And only 1 time mounting. That preserves the thread in the oil pan (those are often no longer supplyable). Completely manufactured in Germany! The thread M16 x 1.5 was Installed in: Citroen 2CV, DS, HY, 11CV, GS. Nearly all classical Peugeot (403, 404, 504, 304, 204)
Gasket for oil drain plug for 2CV6, BX, XM, 204, 203, 304, 404, 504. inlet + exhaust screw
measure: 16,3x22x2mm. Version C, curved with a seal inside. (PTFE)
Oil pressure switch for Citroen 2CV starting from year of construction 1965. Response pressure 0,50
0,60. Thread M12 x 1,50. Electrical connection: Flat plug 6,35mm.
Oil pressure switch for Citroen 2CV6, Installed starting from year of construction 1965. Response
pressure 0.50 bar. Thread M12 x 1,50. Electrical connection: Round plug 4mm.
Oil pressure valve repair set for Citroen 2CV (375, 425, 435cc³). Consisting of spring, ball, ball
fixture, slip piece (12,20mm long).
Oil pressure valve repair set for Citroen 2CV (375, 425, 435cc³). Consisting of spring, ball, ball
fixture, slip piece (16,30mm long).
Oil filler neck seal down, old version. For 2CV with 16 HP engines. Center in the middle about
ut 30mm, hole spacing connector ca.46mm. Or. No. A221 92
Oil filler neck seal down. (Connector on the engine block). Suitable for Citroen 2CV4+6. center
hole diameter about 28,5mm. Connector center to center, about 49mm
Oil filter adapter screw for Citroen 2CV. For replacement to use of a larger oil filter in the
summer and a small oil filter in the winter. Scope of delivery: 1x adapter screw, 1x oil filter largely, 1x oil filter small.
PDF FILE 
Oil cooler line seal, from rubber. Per piece! The rubber seals the oil cooler line in the connector
in the engine block. Suitable for Citroen 2CV6 + 2CV4. Measurement: 10,5x13,6x12,5mm
Oil cooler tool (to loosen the union nut of the oil line that goes into the engine block). Suitable
for Citroen 2CV6 + 2CV4. Dyane, Mehari, AMI (it is possible to mount the oil cooler without dismantling the engine fan housing)
Oil cooler. Suitable for Citroen 2CV, to year of construction 03/1963. Engine: 425cm ³
Reproduction. Or. No. A2251.
Oil line double seal M7 for the hollow bolt. (Connector of the oil line at the cylinder head)
Suitable for Citroen 2CV.
Oil line hollow bolt (extends, for defective thread) 2CV6, M7, for the screwed joint at the
cylinder head (small bore. 0,4mm). Length: 26mm. Thus a deeper thread can be bored, if the original thread is defective. High-quality reproduction from the European Union.
Oil line hollow bolt 2CV6, M7, for the connector at the cylinder head. (small bore 0,7mm). Lenght
18mm, like original. Significant reproduction from the European Union.
Oil line hollow bolt 2CV6, M7, for connector at the engine block. (large bore 2,0mm). Significant
reproduction from the European Union.
Engine oil dipstick rubber application above in the guide tube. (Fixture + guide rubber engine oil
dipstick). Suitable for Citroen 2CV old + 2CV4. Lenght: 40mm. Or.Nr. A221-95a
36 Articles
Select your Citroen 
Please select your Peugeot 
Please select your Citroen Renault 
