engine block for Citroën 2CValt

Engine sealing compound grey, to 340°, 85ml, silicone basis. Optimally for oil pans, valve cap

valve timing cover. Very good quality. Made in Germany.

• Suitable for this article
• 
  Scrapers professional version, to remove of labels on disks, engine sealing
  19,34 €
• 
  Scraper spare blades for 20484 (5 St)
  6,84 €

HYLOMAR engine sealing material, permanent elastic engine sealing, indispensable with engine

e overhaul, 80ml. Hylomar M is temperature resistant between -50°C and +250°C and can be applied for sealing sealing surfaces and threaded pieces.

Oil drain screw magnetically, suitable for Citroen 2CV, HY, DS, 11CV (with oil pan out of sheet

metal). Interior square. The suitable tool has our number 20221. Or. No. A1321M, thread M16x1,5x20

• Suitable for this article
• 
  Gasket for oil drain plug for 2CV6, BX, XM, 204, 203, 304, 404, 504. inlet +
  0,48 €
• 
  Oil drain screw with valve. Thread M16 x 1,5. This valve is mounted instead of
  31,14 €
• 
  Hose (25cm) for the oil drain screw with valve (10636). Thread: M22 x 1,5.
  34,61 €
• 
  Special tool for the oil drain screw. Square 8 + 10mm. Suitable for Peugeot +
  10,81 €

Oil drain screw (engine + gearbox) suitable for Citroen 2CV, DS, HY, GS. Thread M16.

• Suitable for this article
• 
  Gasket for oil drain plug for 2CV6, BX, XM, 204, 203, 304, 404, 504. inlet +
  0,48 €
• 
  Oil drain screw with valve. Thread M16 x 1,5. This valve is mounted instead of
  31,14 €
• 
  Hose (25cm) for the oil drain screw with valve (10636). Thread: M22 x 1,5.
  34,61 €

Oil drain screw seal 18 x 24 x 2mm (for M18 thread). Suitable for Peugeot 203, 403, 404, 504, 505

J7 (all engines). Renault R4. Citroen HY. AMI6 with M4 engine. Oil cooler screwed joint 2CV with 16HP!

Gasket for oil drain plug for 2CV6, BX, XM, 204, 203, 304, 404, 504. inlet + exhaust screw

measure: 16,3x22x2mm. Version C, curved with a seal inside. (PTFE)

Oil pressure switch, suitable for Citroen ID19, DS19, HY petrol. Citroen 2CV + AMI6 without oil

filters! Thread: M14x1,5.

Engine oil dipstick rubber application above in the guide tube. (Fixture + guide rubber engine oil

dipstick). Suitable for Citroen 2CV old + 2CV4. Lenght: 40mm. Or.Nr. A221-95a

Engine oil dipstick for Citroen 2CV (12 HP).

Valve push rod tube for 2CV4 (425ccm engine). Length totally: 165mm, diameter 16mm, fit (set off)

at the cylinder head: 15mm.

Valve push rod tube for 2CV4 (435ccm engine). Length totally: 173mm, fit at the cylinder head

16mm. Or.Nr.: AZ22499

Valve push rod tube seal for 2CV (old version). Single seal, without bar in the center. You need 4

pieces per car. Manufacturer: Original Glaser, no reproduction.

Valve push rod tube seal for Citroen 2CV (first version - from the fifties). Or.Nr.: AZ22495

Identification plate engine, black. Suitable for Citroen, 2CV (old version), 11CV, HY, DS.

Identification plate orange, for Citroen. 78x40mm. 2 bores. (Metal). The red identification plates

were often used for engine numbers!