transmission for Citroën AK-AZU
46 Articles
Drive shaft 2CV, oil seal on gearbox. Suitable for Citroen 2CV6 + 2CV4, Dayne, AK, Mehari, on which
the drive shaft flange is fixed with 6 bolts (i.e. all vehicles with disc brakes and the latest model years with drum brakes). Vehicles with 4 bolts need the oil seal 12294. Size: 31 x 42 x 8mm. Made in Germany.
Seal for drive shaft gearbox side with double universal joint. Suitable for Citroen 2CV4 + 2CV6
(starting from year of construction 1961 about 1973). The seal is of paper. Or. No. AM373-77. Inside diameter 82mm. Outside diameter 118mm.
Seal for drive shaft gearbox side with double universal joint. Suitable for Citroen 2CV4 + 2CV6
(starting from year of construction 1961 about 1973). The seal is of paper. Or. No. AM451-72A. Inside diameter 82,5mm.
Seal for drive shaft flange case at the gearbox. Suitable for Citroen 2CV4 + 2CV6 starting from
year of construction 1961). The seal is out of paper. Or. No. AT the 33186A
Spring suitable for the gear lever in the old gearbox, for Citroen 2CV from the fifties + sixties
es (gearbox shifter rod is rear at the gearbox). The spring is mounted under the gearbox cap. Or.Nr.A33497
Gearbox lid (cap) rear (with mounting for a reversing lamp switch). Suitable for Citroen 2CV6
Dyane. Or. No. 96995255
Gearbox cap seal for Citroen 2CV/AMI6, Dyane. Suitable for the old gearbox, Installed off about
year of construction 1963.
Gearbox locknut - M22x1.5 locking nut, behind the bearing of the 3rd shaft. Left-hand thread. Or
No. AZ332-4. Suitable for Citroen 2CV6, AK, Dyane, ACDY, Mehari, AMI
Gearbox Oil addetive, 20g. Suitable for 1 liter transmission oil. This additive has been specially
developed for manual and differential transmissions. The product significantly reduces wear and reduces temperature peaks which means quieter running, softer gear changes and better fuel-efficiency.
Bearing for drive shaft, in gearbox. Suitable for Citroen 2CV6. Dimension: 25 x 52 x 15mm. The
bearing is behind the oil seal. Original SKF. Our bearing has a groove for a circlip, but can also be mounted without.
Bearing gearbox - main shaft front, for 2CV. Original SKF. Measurement: 25x52x15mm, with groove for
retaining ring. Or.Nr.: ZC9620002U
Bearing primary shaft rear, reproduction. Suitable for Citroen 2CV6. Inside diameter: 20mm, outside
e diameter: 52mm, 57mm, overall height: 15mm, depth to stop in the case: 11,5mm. Or.Nr. ZC9620308
Bearing primary shaft, for Citroen 2CV6. Or. No.: 95572590. Reproduction. Dimension: 20x52x57x22mm
Depth gauge to bead seat wreath/ring: 19,00mm.
M9, stud bolt, for the mounting of the drive shaft at the gearbox. Suitable for Citroen 2CV +
Citroen DS. Measurement: M9x42mm.
Needle bearing suitable for the primary shaft, for Citroen 2CV, Inside diameter: 14,5mm, outside
e diameter: 20mm. Height of 26,5mm. Or.Nr. ZC9620373
Oil drain screw magnetically, suitable for Citroen 2CV, HY, DS, 11CV (with oil pan out of sheet
metal). Interior square. The suitable tool has our number 20221. Or. No. A1321M, thread M16x1,5x20
Gasket for oil drain plug for 2CV6, BX, XM, 204, 203, 304, 404, 504. inlet + exhaust screw
measure: 16,3x22x2mm. Version C, curved with a seal inside. (PTFE)
Gearbox shift sleeve (Selector wheel-disc) for the 2nd-3rd gear. Suitable for Citroen 2CV6, Dyan6
AK, ACDY, AMI, Mehari. Or. no. A335-96
Shifter rod bellows on the gearbox. Suitable for Citroen 2CV, early years of construction. Not
fitting for 2CV6! Or. No.: A33462
Fly wheel, shaft seal for the gearbox main shaft (primary shaft) in the fly wheel. Suitable for
Citroen for 2CV6. Size: 11,9x18x4mm. Or. No. 95495074. Made in Germany.
Fly wheel, shaft seal for the gearbox main shaft (primary shaft) in the fly wheel. Suitable for
Citroen for 2CV6. Size: 12x18x3mm. Or. No. 7903078053. Made in Germany.
2CV6, speedometer pinion in gearbox. 16 theeth! The pinion has an outside diameter of 20,7mm, the
shank has a diameter of 8mm.
Identification plate green, for Citroen. 78x40mm. 2 bores. (Metal). The green identification plates
were often used for gearbox identification!
Guide sleeve in the gearbox, for the connection engine + gearboxes. For 2CV. Measurement
10x14x27,5mm. Very good after production from the European Union.
Motor-gearbox screw connection: Short stud bolts (these are the lower stud bolts) between the motor
and gearbox. Suitable for Citroën 2CV6 + 2CV4, Dyanne AMI8, Mehari
Motor-gearbox screw connection: long stud bolts (these are the upper stud bolts, as they also hold
the air filter holder) between the motor and gearbox. Suitable for Citroën 2CV6 + 2CV4, Dyane, AK, Ami8
46 Articles
Select your Citroen 
Please select your Peugeot 
Please select your Citroen Renault 
