Spare Parts and Tools & Accessories for Citroën SM

4 amps at 6 volts. This battery charger and trickle charger only charges lead-acid batteries (i.e. the batteries in classic cars). It can be used for both 6 volt and 12 volt batteries. This charger can also reactivate deeply discharged batteries (up to a discharge of 0.5 volts)! The clever electronics make it possible. You can also test batteries. It has a fuse circuit in case it is connected incorrectly. It controls the charging current according to the ambient temperature and has many other options. Regular desulphation is important for a long battery service life. And this is what these modern chargers can do.

Citroen SM. Thread: M22 x 1.5mm. Switching point 79 - 88°C. 2 electrical connections. This temperature switch switches through a few degrees earlier. Due to global warming, but also due to engine water channels and radiators that are a little clogged, a little help!

Citroen SM. Thread: M22 x 1.5mm. Switching point 68 - 82°C. 2 electrical connections. This temperature switch switches through a few degrees earlier. Due to global warming, but also due to engine water channels and radiators that are a little clogged, a little help!

12 volts. This small continuous charger is ideal for permanently connecting to a battery during the winter break. State-of-the-art technology protects against reverse polarity of the connections. It is suitable for normal lead batteries (those with acid). The maximum charging current is 0.6 amps. Please note: You cannot use this charger to quickly charge or reactivate empty batteries! It is therefore designed to keep the battery fresh and, if necessary, charge it very slowly. The scope of delivery also includes a charging cable that can be permanently connected to the battery. Simply route the plug connection to the outside and the charger can be connected without opening the bonnet.

knife' among battery chargers. You can connect all types of batteries (STD, AGM, EFB, GEL batteries). Almost all sizes can also be connected (3AH > 144Ah). This charger can even reactivate deeply discharged batteries (down to a discharge of 0.5 volts)! Its smart electronics make it possible. You can also test batteries. It has a safety circuit in case it is connected incorrectly. It controls the charging current according to the ambient temperature and has many other options. Whether it's a lawnmower, boat, car, motorhome, motorbike or tractor, this charger automatically adjusts to everything. And let's be honest, who knows what kind of battery is installed in modern vehicles these days? With this, it doesn't matter! Only modern electric vehicles cannot be charged with it! Of course, it can also be used as a normal battery maintenance charger. Our tip if you have several vehicles that are stored over the winter: get one of these chargers and equip the other vehicles with our maintenance chargers. The scope of delivery also includes a charging cable that can be permanently connected to the battery. Simply route the plug connection to the outside and the charger can be connected without opening the bonnet. Regular desulphation is important for a long service life of lead-acid batteries. And this is what these modern chargers can do.

diameter of carburettor nozzles. Indispensable for work on the carburettor (e.g. changing the nozzle to original values, calibrating the carburettor, etc.).

car. The scope of delivery includes five stainless steel nylon brushes with diameters of 2, 3, 4, 5 and 7 mm and a brush length of 30 mm. Ten stainless steel cleaning needles with diameters of 0.7, 0.9, 1.1, 1.3 and 1.4 mm. A 4 mm Allen key and twelve round carbon steel files with diameters of 0.4, 0.5, 0.6, 0.7, 0.8, 0.9, 1.0, 1.1, 1.2, 1.3, 1.4 and 1.6 mm. A flat file is also included.

faithful reproduction radio panel only fits on the vertically installed original Edison R437 radio. At last there is a way to restore this very rare radio to its original appearance.

searched for a long time and tried different products. This adhesive, which dries and hardens under UV light, is perfectly suited for fixing interior mirrors(rear-view mirrors) of a DS, window handles for sliding windows (Renault R4) or for the handles of triangular windows (VW T3, Alfa Romeo Spider, etc.). The adhesive is thick (gel-like) and should dry under the UV lamp (you also need 3x AAA batteries), also supplied with. As far as the adhesive has not been dried under the UV lamp, you can still make corrections (or wipe off excess adhesive). Of course, you can also use it to glue the handles of beer mugs or the bases of wine glasses! Technical details: Single-component adhesive that dries under UV light. Based on acrylate and polyurethane. The adhesive dries under UV light in the range of 320-400 nm within 15-20 seconds. The adhesive does not yellow. content of delivery: Acrybond adhesive 16 g. 1x UV lamp 1 W (batteries not included). Made in Germany. Believe us, if this adhesive had been available when we were young, we could have saved ourselves a lot of trouble..

• Suitable for this article
• 
  Rear-view mirror, rubber for the base (holder) of the interior mirror (between
  5,86 €
• 
  Rear view mirror (inside mirror). Suitable for Citroen DS, starting from year
  208,16 €
• 
  R4/Estafette, stop knob for the sliding window. Suitable for Renault R4 +
  16,76 €
• 
  R4/Estafette, stop knob for the sliding window. Suitable for Renault R4 +
  16,76 €
• 
  R4/Estafette, locking knob for the sliding window (original Renault, no
  26,68 €

the cleaned rust spot must then be preserved with paint immediately.

handbrake cables, speedometer cables, petrol hose... External dimensions: 23x30mm. Inner diameter: 8mm. The rubber is slit on one long side, and can therefore be easily placed over the cable to be protected!

External dimension: 42mm. Length: 31mm. Inner diameter: 12mm. The rubber is not slit (but of course this can be done afterwards if it makes assembly easier)

button and not a toggle switch. The push button is useful for electric windscreen washers, horns or headlight flashers, for example. Dimensions: 36x18mm (French standard size). Suitable for Peugeot, Citroen, Renault.

all 2 and 4-stroke engines. Ideal for our classic cars. Prevents corrosion in the tank and in the entire fuel system. Antioxidants prevent the fuel from ageing (the petrol remains ignitable). Binds and neutralises condensation in the tank. Eliminates starting difficulties when the vehicle has not been used for a long time. And as a special feature, the petrol additive has an octane booster. It therefore increases the ignitability of the petrol (knock resistance). Particularly interesting for regions in this beautiful world where there is no super petrol with at least 98 octane, or if you are involved in motor sports! Packaged in a high-quality aluminium can. Contents: 150ml. Application: 150ml is sufficient for 20 litres of petrol. Fill the tank completely. Fill in the fuel additive. Run the engine for 10 minutes. Done!

M14x1.5 on both sides (1x 17mm hexagon + 1x 19mm hexagon). Thread inner diameter: 1x M9 + 1x M8. The brake line on the Suspension Arm in the Citroen SM is the only thin brake line with M8 thread. Overall length: 300mm

hoses, hydraulic hoses, wiring harness...)

in the EU. This cute R4 is just the thing for dads and grandads who want to make a sensible gift for their little ones. And when the little ones get too big, it makes a nice cold drink storage - decoration - object, for all garages, terraces etc. The rear push bar can be dismantled in 1 minute! Sale - well below our purchase price!

• Suitable for this article
• 
  Multi-purpose grease, cartridge 400g, suitable for our lubricating gun.
  6,34 €
• 
  Molykote grease in cartouche for lubricating gun. 400g (graphite grease). Heavy
  8,32 €
• 
  Lubricating grease, color red, 400g cartouche. Original one by TOTAL! Red
  7,93 €

EU. This cute 2CV is just the thing for dads and grandads who want to make a sensible gift for their little ones. And when the little ones get too big, it makes a nice cold drink storage - decoration - object, for all garages, terraces etc. The rear push bar can be dismantled in 1 minute! Sale - well below our purchase price!

VIDEO