engine cooling for Citroën SM
57 Articles | Page 1 of 2
Distilled water, 5 liters. For radiator filling. Tap water contains harmful components for the
cooling circuit. For mixing the antifreeze fluid, please take care to use distilled water . It improves the adhesion of corrosion-blocker in your cooling system.
GLACELF CARTECH antifreeze concentrate from Total (must be mixed with distilled water). Suitable
for classic engines that also have aluminium and/or copper components (radiator, cylinder head, etc.). Reliable protection against rust, corrosion, foaming and cavitation. Mixing ratio: 50% antifreeze + 50% distilled water. Attention: This is a new antifreeze from TOTAL that replaces the antifreeze "GLACEELF Auto Supra" (CLACELF contains borates, which are no longer permitted in the EU). The two antifreezes can be mixed together. But be careful: CARTECH antifreeze is only mixable with GLACEELF Auto Supra from TOTAL. CARTECH is not mixable with antifreeze from other manufacturers. But it is best to replace the antifreeze completely with TOTAL CARTECH! General information: Amines, nitrites and borates are no longer allowed under the new EU CLP regulations. In addition, 2-ethylhexanoic acids must be removed because they are suspected of being harmful to human reproduction (or in short: it making you impotent!)
PDF FILE 
Degreaser for radiator. For cleaning and degreasing of copper and aluminium radiators. Use: mix 1
kg degreaser in 10 liters warm water. After draining of cooling water fill in radiator with degreasing water: After driving (1-2 days)please drain degreasing water and flush the cooling system with hot water before refilling it. Caution: the cleaning process may uncover some leakages!
Descaling agent for radiators. For decalcifying of copper and aluminium radiators. Use: mix 1 kg
softening agent in 10 liters warm water. After Draining of cooling water fill in radiator with decalcifying: After driving (1-2 days)please drain softening agent water and flush the cooling system with hot water before refilling it. Caution: the cleaning process may uncover some leakages!
Radiator cap, 0.49 atue. Suitable for Citroen DS21 IE, DS23 IE, DS23 carburetor + Citroen SM. For
vehicles with radiator compensating tank (starting from year of construction 1972). Or. No. 6D5428759A
Tube bending sleeve. Suitable for hose outer diameter of 12,5 > 13,4mm. Length: 60mm. With this you
can easily produce bent water hoses. Simple and ingenious!
Tube bending sleeve. Suitable for hose outer diameter of 14,6 > 16,4mm. Length: 65mm. With this you
can easily produce bent water hoses. Simple and ingenious!
Tube bending sleeve. Suitable for hose outer diameter of 16,5 > 18,4mm. Length: 70mm. With this you
can easily produce bent water hoses. Simple and ingenious!
Tube bending sleeve. Suitable for hose outer diameter of 18,8 > 21mm. Length: 75mm. With this you
can easily produce bent water hoses. Simple and ingenious!
Tube bending sleeve. Suitable for hose outer diameter of 21,8 > 24mm. Length: 90mm. With this you
can easily produce bent water hoses. Simple and ingenious!
Hose clamp 11-17mm, especially for radiator hose. Vintage look. Embossed band with raised edges
This prevents the hose from being damaged. Small screw housing with 7mm hexagon head screw (with slot). Normal, modern hose clamps squeeze the hose. This is completely avoided with these clamps. And they even look better.
Hose clamp 13-20mm, especially for radiator hose. Vintage look. Embossed band with raised edges
This prevents the hose from being damaged. Small screw housing with 7mm hexagon head screw (with slot). Normal, modern hose clamps squeeze the hose. This is completely avoided with these clamps. And they even look better.
Hose clamp 15-24mm, especially for radiator hose. Vintage look. Embossed band with raised edges
This prevents the hose from being damaged. Small screw housing with 7mm hexagon head screw (with slot). Normal, modern hose clamps squeeze the hose. This is completely avoided with these clamps. And they even look better.
Hose clamp 19-28mm, especially for radiator hose. Vintage look. Embossed band with raised edges
This prevents the hose from being damaged. Small screw housing with 7mm hexagon head screw (with slot). Normal, modern hose clamps squeeze the hose. This is completely avoided with these clamps. And they even look better.
Hose clamp 22-32mm, especially for radiator hose. Vintage look. Embossed band with raised edges
This prevents the hose from being damaged. Small screw housing with 7mm hexagon head screw (with slot). Normal, modern hose clamps squeeze the hose. This is completely avoided with these clamps. And they even look better.
Hose clamp 26-38mm, especially for radiator hose. Vintage look. Embossed band with raised edges
This prevents the hose from being damaged. Small screw housing with 7mm hexagon head screw (with slot). Normal, modern hose clamps squeeze the hose. This is completely avoided with these clamps. And they even look better.
Hose clamp 32-44mm, especially for radiator hose. Vintage look. Embossed band with raised edges
This prevents the hose from being damaged. Small screw housing with 7mm hexagon head screw (with slot). Normal, modern hose clamps squeeze the hose. This is completely avoided with these clamps. And they even look better.
Hose clamp 38-50mm, especially for radiator hose. Vintage look. Embossed band with raised edges
This prevents the hose from being damaged. Small screw housing with 7mm hexagon head screw (with slot). Normal, modern hose clamps squeeze the hose. This is completely avoided with these clamps. And they even look better.
Hose clamp 40-56mm, especially for radiator hose. Vintage look. Embossed band with raised edges
This prevents the hose from being damaged. Small screw housing with 7mm hexagon head screw (with slot). Normal, modern hose clamps squeeze the hose. This is completely avoided with these clamps. And they even look better.
Hose clamp 50-65mm, especially for radiator hose. Vintage look. Embossed band with raised edges
This prevents the hose from being damaged. Small screw housing with 7mm hexagon head screw (with slot). Normal, modern hose clamps squeeze the hose. This is completely avoided with these clamps. And they even look better.
Hose clamp 57-75mm, especially for radiator hose. Vintage look. Embossed band with raised edges
This prevents the hose from being damaged. Small screw housing with 7mm hexagon head screw (with slot). Normal, modern hose clamps squeeze the hose. This is completely avoided with these clamps. And they even look better.
SM, seal for the cover plate engine block + connections water pipelines. Suitable for Citroen SM
Or.Nr. 54005618T. Made in Germany.
Temperature switch for the auxiliary fan (cooling water). Suitable for Citroen DS 23, DS23 IE +
Citroen SM. Thread: M22 x 1.5mm. Switching point 68 - 82°C. 2 electrical connections. This temperature switch switches through a few degrees earlier. Due to global warming, but also due to engine water channels and radiators that are a little clogged, a little help!
Temperature switch for the auxiliary fan (cooling water). Suitable for Citroen DS 23, DS23 IE +
Citroen SM. Thread: M22 x 1.5mm. Switching point 79 - 88°C. 2 electrical connections. This temperature switch switches through a few degrees earlier. Due to global warming, but also due to engine water channels and radiators that are a little clogged, a little help!
Temperature switch for the auxiliary fan (coolant). Suitable for Citroen DS 23, DS23 IE + Citroen
SM. Thread: M22 x 1,5mm. Switching point 82 - 92°C. 2 electrical connections.
57 Articles | Page 1 of 2
Select your Citroen 
Please select your Peugeot 
Please select your Citroen Renault 
