P 403/404, release bearing fixing clip (short version). Suitable for all Peugeot 403 + Peugeot 404
(C3 gearbox). Attention: Long (71425) and short clamps (No. 71426) have been fitted. Depending on the version. Or. No. 2049.03
for Peugeot 203-403
1204 Articles | Page 18 of 25
P 403/404, release bearing fixing clip (long version). Suitable for all Peugeot 403 + Peugeot 404
(C3 gearbox). Attention: Long (this) and short clamps (No. 71426) have been fitted. Depending on the version. Or. No. 2049.05
P 403/404, clutch release sleeve, for C3 gearbox (not suitable for BA7). Suitable for Peugeot 403 +
404, to year of construction 1967 (excluded 403 U8, 403/7 Diesel). For all engines. The clutch release sleeve is running in ball bearings. Or. No. 2041.11. Please preload the clutch adjust again. Peugeot work instruction 2/0101 0102 + 2/0201 + 2/0401 > 0405.
PDF FILE 
P 403/404, brake shoe spring set (front axle). Suitable for Peugeot 403 + Peugeot 404 (vehicles
without brake booster). Or. no. 4308.04.
P 403/404, front brake shoes. Suitable for Peugeot 403, all years of construction. Peugeot 404 from
year of construction 1961 onwards. Brake drum diameter: 255 mm. Brake lining width: 50 mm.
P 403/404, brake hose rear. Length: 495mm. Suitable for Peugeot 404, first years of construction
Peugeot 403. Simca Aronde. Thread: 1 side male thread 5/8-18H + female thread 7/16-20H. Other side: Male thread 7/16-20H. Made in Spain.
P 403/404, brake hose in front Peugeot 403 first model, Peugeot 404 first model, Simca Aronde
Overall length 410mm. Male thread 7/16 x 20 UNF, other side 7/16 x 20 UNF female threads, about 16mm male thread. Or. N0. 4806.05. Made in Spain.
P 403/404, seal Dieselfilter Bosch. Dimension: 75x83x3mm. Suitable for Peugeot 403 Diesel + 404
Diesel. Or. No. 1912.01
P 403/404, seal for the lid of the fuel sender (Jaeger). Suitable for Peugeot 403 + 404. Or. No
1526.06. Original Peugeot, no reproduction!
P 403/404, master brake cylinder. Piston diameter: 22mm. Brake line connector: 1/2 x 20 UNF. Brake
fluid reservoir thread: about: M19 x 1,5. Suitable for Peugeot 403, starting from year of construction 10/1960. Peugeot 404, starting from year of construction 07/1960. Not suitable for Thermostable brakes. Or. No. 460112. Made in Europe.
P 403/404, master brake cylinder. Suitable for Peugeot 403 + 404. Piston diameter: 17,46mm (11/16)
Thread brake fluid reservoir: 19mm.
P 403/404, crankshaft bearing, 0.8 oversize. Suitable for Peugeot 404, of year of construction 1961
to 1964 (starting from engine 4036261, 3 crankshaft bearings, 1618cc). Peugeot of 403, final years of construction.
P 403/404, air cleaner element round, for Peugeot 403 + 404. Height of 125mm, outside diameter
110mm, inside diameter 67mm.
P 403/404, clutch disk for Peugeot 403 Diesel + 404 Diesel to year of construction 1967. For
engine: XDP85. Dimension: 200 x 30 x 10mm. Note: adjust the clutch free travel! Peugeot work instruction 2/0101 0102 + 2/0201 + 2/0401 > 0405.
P 403/404, clutch disk. Suitable for Peugeot 403, of year of construction 1956 to 1964. Peugeot
404, of year of construction 1960 to 1967. Diameter: 215mm, 30x25x10. Teeth: 10. Lining thickness: 7,9mm. Or. No. 2054,16 + 2054.21. Note: adjust the clutch free travel! Peugeot work instruction 2/0101 0102 + 2/0201 + 2/0401 > 0405.
Wheel brake cylinder rear left, for Peugeot 403 and 404, piston:15/16 inch,(23,81mm). Connector 3/8
x 24UNF. Or.Nr. 440226. Made in Europe.
Wheel brake cylinder rear right. for Peugeot 403 and 404, piston:15/16 inch,(23,81mm). Connector
3/8 x 24UNF. Or.Nr. 440227. Made in Europe.
P 403/404, wheel brake cylinder with 1 piston 30mm,brake line connector 3/8 x 24UNF (9,5mm),403 Bj
1961->, 404, 404 Comercial, 404 Pick UP. Mounting board bore 21,5mm, , length over all 63,5mm. Made in Europe.
wheel brake cylinder repair set front 403+404 with 1,1/8 inch piston till model changing 1965
Themostable brakes came
P 403/404, wheel brake cylinder in front. 1 piston (30mm). Brake line connector: 7/16 x 20 UNF (E
Flanging). Suitable for Peugeot 403 + 404 (starting from year of construction 1965). Mounting board bore 22mm. Length over all 65mm. Or. No. 4401-20. Made in France
P 403/404, wheel brake cylinder in front. Fits on the left + on the right. Suitable for Peugeot 403
(7-D-BD-U-L). Peugeot 404B + Coupe. Piston diameter: 28.57 mm. Brake line connector: 7/16 x 20UNF. Mounting board bore: 22mm. Or. No. 4401.14. Installed on vehicles, before year of construction 10/1964! Made in France
P 403/404, carburetor Solex 34BICSA (no reproduction). Carburetor diameter: 34mm. Suitable for
Peugeot 403, 404, J7, J9. Original SOLEX carburetor, no reproduction. Or. No. Solex: 13550 000. Or. No. Peugeot: 1401.93
P 403/404, carburetor Solex 34BICSA12 (no reproduction). Carburetor diameter: 34mm. Suitable for
Peugeot 403, 404, J7, J9. Original SOLEX carburetor, no reproduction. Or. No. Solex: 13549 000. Or. No. Peugeot: 1401.66
Starter lock (in the dashboard), suitable for Peugeot 403 + 404 (first version). 3x connection
Case diameter: 39mm. Lockbolt: 8x13 mm. Case high over everything: 64 mm (without cable connections)
Guide sleeve for the horn actuation rod in the steering column. Suitable for Peugeot 403, 404
partly 504. Material Celaron. 2,7x6x15mm. Or. No. 626305
P 403/404/504, fan blades for Peugeot 403 + Peugeot 404, Peugeot 504 TI 2.0L (with very minor
modifications). Reproduction made of plastic! Outer diameter: 325mm. Diameter for the mount on the water pump: approx. 104mm. Height: 43mm.
P 403/404/504, wheel bearing set rear. Suitable for Peugeot 403, of year of construction 1958 to
1966. Peugeot 404 (sedan, Cabriolet + Coupe) of year of construction 1960 to 1975. Peugeot 504 (sedan, Cabrio + Coupe) starting from year of construction 1973. Outside diameter: 72,0mm. Inside diameter: 35,0mm. Overall height: 17,0mm.
P 403/404/504, bonded-rubber bushing mounting plate spring at the rear axle, Peugeot 403, Peugeot
404 + 404 Pick UP, Peugeot 504 Pick UP. Measurements inside 16mm, outside 32mm. Length inside 54mm, outside 50mm
P 403/404/504, shock absorber rear (2 fittings). Suitable for Peugeot 403 Pick Up, 404 Pick UP +
504 Pick UP. Length over everything: 415mm (compressed) + 650mm (pulled apart). Inside diameter bonded-rubber bushing: 13,4mm. Diameter shock absorber: 50mm.
P 403/404/504/505, gearbox bearing BA7/4 + Ba/5 gearbox. Fits primary shaft on engine side
Secondary shaft2, opposite engine (rear). Intermediate shaft 1, engine side. For Peugeot 404, Peugeot 504, Peugeot 403, Peugeot 505. Outer diameter:: 75mm. Inner diameter:: 35mm, Overall height: 20mm. The bearing has a groove on the outer ring. Or. No. 2308.10
P 403/404/504/505, bearing for the jackshaft, rear (gearbox BA7). Suitable for Peugeot 403, Peugeot
404, Peugeot 504, Peugeot 505. Outside diameter: 47mm. Inside diameter: 21,5mm. Overall height: 16.25 mm. Or. No. 2372.11
P 403/404/504/J7, brake hose rear, suitable for Peugeot 403, 404, 504, J7. Overall length 480mm
Connections both sides: Male thread 5/8 x 24UNF, female thread 3/8 x 24 UNF. Or.Nr. 445116 + 481607. Made in Europe.
P 403/404/DS, H4 headlight insert. Version CIBIE. Suitable for Peugeot 403 + 404. Citroen DS, to
year of construction 1967. 180mm diameter. The headlamp has 2x securement + 2x bracket. Mounting for H4 bulb, thereby substantially better light! Reproduction without approvals!
P 403/404/DS, H4 headlight insert. Version DUCELLIER. Suitable for Peugeot 403 + 404. Citroen DS
to year of construction 1967. 180mm diameter. The headlamp has 3x securement. Mounting for H4 bulb, thereby substantially better light! Reproduction without approvals!
P 403/404/DS, H4 headlight insert. Version MARCHAL. Suitable for Peugeot 403 + 404. Citroen DS, to
year of construction 1967. 180mm diameter. The headlamp has 3x securement + 1x bracket. Mounting for H4 bulb, thereby substantially better light! Reproduction without approvals!
P 403/404/DS, headlight insert (NOS). Ducellier design. Suitable for Peugeot 403 + 404. Citroen DS
up to year of construction 1967. 180 mm diameter. Holder for a double filament bulb. Please note: These are original headlights from the manufacturer CIELCO in Spain. Found in a warehouse clearance (new old stock). The headlights have a test mark!
P 403/404/DS, sheet metal headlight housing for Marchal headlights. Suitable for Peugeot 404. This
headlight housing can also be used with minor modifications for Peugeot 403 and Citroen DS (old front).
1204 Articles | Page 18 of 25
Select your Citroen 
Please select your Peugeot 
Please select your Citroen Renault 
