for Peugeot 504-604

P 504, Wheel guide repair kit (per side). Suitable for Peugeot 504, up to year of construction

06/1985. Consisting of: 4x silent bearing, 1x bearing pin (wishbone). The repair kit 73026 has the same dimensions, but the large rubber bush is reinforced with a metal washer (series improvement from year of manufacture 1985).

P 504, wheel bearing shaft seal, in front. Dimension: 45 x 60 x 10mm. Suitable for Peugeot 504.

P 504, wheel bearing in front. Dimension: 20 x 52 x 15mm. Suitable for Peugeot 504, of year of

construction 1968 to 1976. Or. No. 3735.03

wheel tread rear left side Peugeot 504. Made in Europe.

wheel tread rear right side Peugeot 504. Made in Europe.

P 504, wheel nut. Thread: M12 x 1,25mm. Suitable for Peugeot 504. Or. No. 5405.31

• Suitable for this article
• 
  P 504/505, wheel bolt. Thread: M12 x 1,25. Length of thread: 38mm. Suitable for
  3,95 €

P 504, Repair set (rubbers) for front brake caliper. Brake system Lucas. For piston diameter: 54mm

Suitable for peugeot 504. Or. No. 4448.20

• Suitable for this article
• 
  P 504, pistons for brake caliper. Brake system Girling. Diameter: 54mm
  19,73 €

Rear light cap left for Peugeot 504 Cabrio 1 series - with reflector! (rear light)

tail lamp cap left Peugeot 504 Break

Rear light cap left, yellow, for Peugeot 504C 1 series, back flasher

r

tail lamp camp left P 504 Limo 1970-1982

tail lamp cap right P 504 Limo 1970-1982

Rear light cap right for Peugeot 504 Cabrio 1 series - with reflector! (rear light)

Rear light cap right for Peugeot 504 Cabrio 1 series - without reflector! (stoplight)

Rear light cap right for Peugeot 504C 1 series yellow, rear indicator

r

tail lamp cap right, Peugeot 504 Break

P 504, silencers rear. Suitable for Peugeot 504, of year of construction 01/1971 to 06/1983. Engine

petrol 1796cc + Diesel 2304cc. Pipe diameter: 42mm. Or. No. 1724.68 + 1724.61

• Suitable for this article
• 
  Tailpipe trim chromium-plates. 42mm inside diameter. Universal suitable
  14,78 €

P 504, silencers centrically. Suitable for Peugeot 504, starting from year of construction 07/1968

to 07/1986. Engine 1796cc to 1971cc. Carburetor + injection engines. Or. No. 1722.18

P 504, silencer center. Suitable for Peugeot 504, of year of construction 08/1978 to 06/1982

Engine: XM7P (1796cc). Diesel XP88, XD90 + XD94 (1948cc, 2112cc, 2304cc). Or. No. 1722.61

P 504, shift linkage repair set (4 gear). Suitable for Peugeot 504, starting from year of

construction 10/1978. The long rod has a length of 290mm. The short rod is adjustable by 100 - 110mm.

P 504, gearshift linkage repair kit Peugeot 504 V6 (convertible + coupe) with BA10/ gearbox (5

speed), from year of construction 1978 to 1983. Peugeot 504 with 2.0 engine and gearbox BA7/5 (5 speed), from year of construction 1980 to serial number 3 509.

P 504, shift linkage repair set, for the steering columm gear shift change. Suitable for Peugeot

504, starting from year of construction 10/1969. Shifter rod length: Short rod about 175mm. Medium rod about 260mm. Long rod about 440mm.

P 504, headlamp Peugeot 504, on the left, H4! Reproduction without test characters!

P 504, headlamp Peugeot 504, on the right, H4! Reproduction without test characters!

headlamp front left side Peugeot 504, Bilux. Only for left hand drive (LHD)

• Suitable for this article
• 
  Double filament bulb 45/40W, 12V.
  2,93 €
• 
  H4 bulb with two-filament base, 12V,
  7,83 €
• 
  Two-filament bulb 40/45 W, 12 Volt, yellow ! Not allowed in German traffic
  9,38 €

headlamp front right side Peugeot 504, Bilux. Only for left hand drive (LHD)

• Suitable for this article
• 
  Double filament bulb 45/40W, 12V.
  2,93 €
• 
  H4 bulb with two-filament base, 12V,
  7,83 €
• 
  Two-filament bulb 40/45 W, 12 Volt, yellow ! Not allowed in German traffic
  9,38 €

Striker plate door on the left, Peugeot 504. Reproduction

Striker plate door on the right, Peugeot 504. Reproduction

Striker plate door on the right, Peugeot 504. Reproduction

P 504, safety sheet wheel bearing - drive shaft. Inside diameter: 26mm. Suitable for Peugeot 504

Or. No. 3736.15

P 504, bonded-rubber bushing for the wishbone (rear axle). Suitable for Peugeot 504 sedan, Cabrio

Coupe. Inside diameter: 16,0mm. Outside diameter: 32mm. Or. No. 5131.17

P 504, bonded-rubber bushing triangle rear axle. Diameter inside: 14mm. Outside diameter: 29mm

Length inside: 44mm. Length outside: 32mm. Suitable for Peugeot 504. Or. No. 3523.12

P 504, coverings (2x seat in front, 1x seat bench rear). Color: Vinyl beige. Suitable for Peugeot

504 TI sedan.

P 504, mirror on the left. Suitable for Peugeot 504 Pick UP, starting from year of construction

1985. Or. No. 8148.77. Final 504 version. The mirror is complete from synthetic. distance bolts 65mm

P 504, mirror on the right. Suitable for Peugeot 504 Pick UP, starting from year of construction

1985. Or. No. 8148.78. Final 504 version. The mirror is complete from synthetic.

P 504, tie rod completely (inclusive tie rod end + collar steering gear). Suitable for Peugeot 504

Cabriolet + Coupe. Also suitable for Peugeot 104, Peugeot 505. Citroen VISA. Or. No. 3812.15. The tie rod is on the left + on the right identically.

P 504, tie rod completely (inclusive tie rod end). Suitable for Peugeot 504. The tie rod fits on

the left + on the right. Per piece. Total length turned completely together, from the middle of the ball head to the middle of the fork head: 270mm. Middle threaded tube, total length: 162mm. M14 adjustment thread on both sides. Or. No. 3813.35 Made in Italy

P 504, tie rod completely. Suitable for Peugeot 504, starting from year of construction 1980

(sedan, Cabriolet + Coupe). Peugeot 604. Per piece. The tie rod is on the left + on the right identically. Or. No. 3812.17 Made in Italy

P 504, tie rod, old version. Left + right = identical. Per piece. Suitable for Peugeot 504, made in

Italy. Length centre fork head to centre ball head = 275mm.

P 504, tie rod, without tie rod end. Length: 262mm long. 1x male thread M12x1,0 + 1x female thread

M14x1,5mm. Suitable for Peugeot 504 Cabrio + Coupe, Peugeot 604.

P 504, tie rod end repair set. Suitable for Peugeot 504 (1 serie), to year of construction 1979

Suitable for on the left + on the right. Or. No. 3899.12

P 504, tie rod end repair set. Suitable for Peugeot 504 (1 serie), to year of construction 1979

Suitable for on the left + on the right. Or. No. 3899.18

P 504, anti roll bar rubber bearing. For anti roll bar diameter: 24,0mm. Suitable for Peugeot 504

Or. No. 5094.09

P 504, anti roll bar rod (ouple rod). Suitable for Peugeot 504 BREAK. Or. No. 5087.15

P 504, anti roll bar rod (ouple rod). Suitable for Peugeot 504, starting from No. 1702474. Length

over everything: 135mm. Or. No. 5087.09

P 504, anti roll bar rod (ouple rod). Suitable for Peugeot 504, to No. 1702473. Or. No. 5087.05

P 504, material beige 2308, backrest cover rear, Peugeot 504 Coupe. Or.Nr.895113

P 504, shock absorbers in front (spring and damper unit). Suitable for Peugeot 504 + 504 Cabriolet

Coupe. Installed from year of construction 08/1975 to 12/1981. Case length inclusive piston rod guide: 455mm. Outside diameter upper piston rod guide: 45mm. Diameter piston rod: 20mm. Thread above on piston rod: M12.

• Suitable for this article
• 
  Oil for shock absorber (motorcycle fork oil) 500ml, 10W, medium viscosity. This
  11,35 €

P 504, shock absorbers in front (spring and damper unit). Suitable for Peugeot 504 + 504 Cabriolet

Coupe. Installed from year of construction 1968 to 03/1976. Thread above: 12,0mm. Sleeve length: 435mm. Caution! The spring-and-damper units are delivery without oil.

• Suitable for this article
• 
  Oil for shock absorber (motorcycle fork oil) 500ml, 10W, medium viscosity. This
  11,35 €

P 504, front bumper (primed). Suitable for Peugeot 504 Pick UP.