Search in Peugeot-504 + 604 for

Oil filter LS498C. Suitable for Peugeot 504 V6 (Cabriolet + Coupe) + Peugeot

604 V6. Talbot Tagora. Or. No. 1109.82

• Suitable for this article
• 
  Engine oil HTX 20W-50, from TOTAL/elf. Special oil for classic cars with petrol
  52,46 €

Oil filter LS867B Peugeot + Citroen Diesel. Peugeot 504 XN2, 504 D, 205 D

Citroen CX D, Bx D. engines: TU/TUD/XU/XUD. Height: 79mm. Outside diameter: 76mm. Thread: M20x1,5. Or. No. 1109.N2

• Suitable for this article
• 
  Engine oil HTX 20W-50, from TOTAL/elf. Special oil for classic cars with petrol
  52,46 €

Oil filter, for Peugeot 204, of year of construction 10/1970 to 09/1975

Peugeot 304, Peugeot 404 starting from year of construction 1968, 504, J5, Citroen C25. Connecting thread: M18 x 1,5mm.

• Suitable for this article
• 
  Engine oil HTX 20W-50, from TOTAL/elf. Special oil for classic cars with petrol
  52,46 €

Oil filter tool (76mm inside diameter) , particularly for PURFLUX oil filter

with 6 or 12 slots. (Citroen 2CV)

Tool universal for oil filtre, fits for all oil filter, also to remove spheres!

Oil can with pump, made of sheet metal, blue painted, optic like in former

times, 125 ccm content,

Oil pump for Peugeot Diesel. Engine code: XD2, XD3. Suitable for Peugeot 504

505, J7, industrial engines. Or. No. 1001.37

Oil pump with suction strainer. Suitable for Peugeot of 504, 505. 4 liners fuel

engines. Or. No. 1001.30

Oil pump, befitting for Peugeot 504 (petrol + Diesel). Peugeot 505 (petrol +

Diesel). Citroen C25 (petrol + Diesel). Or. No. 1001.30

Oil pan seal euro engine (PRV). Suitable for Peugeot 504 V6, Peugeot 604 V6

Renault Alpine A310 V6 (not for engines with aluminum oil pan), R30 V6.

Oil pan seal Peugeot Diesel. For the following engines: XD2, XD4.88, XD4.90

XD2S, XD3, XD3TE, XDP88, XDP90, CD2P94. Suitable for Peugeot 404, 504, 505, 604, J7, J9. Citroen HY Diesel. Or. No. 0313.23

• Suitable for this article
• 
  Engine sealing compound grey, to 340°, 85ml, silicone basis. Optimally for oil
  5,15 €

Oil change card "Der Franzose". With inspection list. Language: German

English, French! Per piece!

Oil change cards (10 fittings) "Der Franzose". With inspection list. Language

German, English, French!

Aluminum sealing ring range. 300 sealing rings, from 9x1 to 28x26. Optimally

for brake and engine.

• Suitable for this article
• 
  Hook set 135mm long. 4 fittings, optimally for O-rings, seals, Citroen brake
  8,83 €

Copper sealing ring range. 150 fittings.

P 104/504/505, door handle in front on the right, outside. Suitable for Peugeot

104, 504, 604. Or. No. 9101.44

P 203/403/404/504, brake shoe mounting kit for servo brake (Mastervac) at rear

Suitable for Peugeot 203, 403, 404, 504. For saloon, coupé and convertible. Consisting of: 2x 4375.16, 2x 4308.06, 4x 4312.06, 4x 4315.08, 2x 5363.01. Total length of springs: 132.5mm + 65mm.

P 203/403/404/504, grease cap out of sheet metal. Diameter: 66mmm. Suitable for

Peugeot 203, 403, 404, 504 (to year of construction 1976). Or. No. 3740.07

P 203/403/404/504, oil restraint coil, rear axle tube on the right. Suitable

for Peugeot 203, 404, 404 + 504. Outside diameter: 61,12mm. Inside diameter: 40,2mm. Marking: white. Or. No. 3045.17

P 203/403/404/504, wheel bearing shaft seal in front. Suitable for Peugeot 203

403, 404, 504. Dimension: 42 x 62 x 10mm. Or. No. 3724.08

P 203/403/404/504, shaft seal for the bearing of the full-floating axle

Dimension: 52 x 75 x 12mm. Suitable for Peugeot 203, 403, 404, 504. Or. No. 3345.09

Brake cheek lining for Peugeot, to rivet on, width: 65mm, drum: 254mm, incl

rivets. 4x 280x65x6mm.

P 204/304/404/504, flexible disk steering column. Suitable for Peugeot 204

304, 404, 504. Pitch diameter: about 50mm. Or. No. 4040.14

P 204/304/404/504, rear axle rubber stop. Diameter: 55mm. Height: 53mm

Suitable for Peugeot 204, 304, 404, 504. Or. No. 3514.12

P 204/304/404/504, gear knob for steering wheel gear change. Please note: this

is the rubberised version (not Bakalit). Suitable for all Peugeot 204, 304, 404, 504 with steering wheel gear change! Or. No. 2401.16

P 204/304/504/ repair set of wheel brake cylinders rear, system Girling, 7/8

8 piston 22,225mm.

P 204/304/504/104 repair set for the master brake cylinder (2 circle brake)

Piston diameter: 19,05mm. The sealing set fits for the two different 2 circle master brake cylinder Peugeot 304. With early master brake cylinder (4601.37) must be ordered the sealing set 2x (there has each piston 2 collars). With the later version starting from FIN 3.733.770 and the Or. No. 4601.72, you need only 1 sealing set. The early version has 2 dowel pin, the late version a retaining ring.

P 204/304/504/505, bearing for the steeering rack (24mm diameter). Suitable for

Peugeot 204 + 304 with gear rack length: 468mm. Peugeot 504 + 505 for steering unit without power steering. Or. No. 4006.14

P 204/304/504/505, wheel bearing shaft seal. Dimension: 54 x 72 x 10mm (wheel

bearing inside). Suitable for Peugeot 204, 304, 504, 505, 604. Or. No. 3345.17

brake hose Peugeot 204+304,104,504,505. front 09/75>10/77, length 375mm, male

le thread 1xM10x1 - female thread 1x M10x1

• Suitable for this article
• 
  clip for brake hoses, Peugeot 304, 404, 504
  2,88 €

P 204/304/504/505/604, shaft seal wheel bearing (exterior). Outside diameter

70mm. Inside diameter: 55mm. Height: 10mm. Suitable for Peugeot 204, 304, 504, 505, 604. Or. No. 3346.06

P 204/403/404/504, wheel bearing rear (exterior bearing). Outside diameter

52mm. Inside diameter: 20mm. Wide one: 15mm. Suitable for Peugeot 204, 403, 404 + 504. Or. No. 3735.03 Made in Spain

P 204/504, axle for a-arm. Length: 78mm. Diameter: 14,0mm. Thread: M12 x 1,5

Suitable for Peugeot 204, 504, 505, 604. Or. No. 5249.20

P 304/305/504/505, repair set for the steering gear (28mm gear rack). Suitable

for Peugeot 304, starting from year of construction 1977. Peugeot 504, 505, 604.

brake hose Peugeot 504 front 09/75-10/82, P 304, P305,P404,P604, length 401mm

connections male thread M10 + female thread 1x M10. Made in Europe.

• Suitable for this article
• 
  clip for brake hoses, Peugeot 304, 404, 504
  2,88 €

clip for brake hoses, Peugeot 304, 404, 504

P 304/504/505/604, thrust piece (diameter 28mm) gear rack. Suitable for Peugeot

204, 304 (new mounting). Peugeot 504, 505, 604. Or. No. 4062.10

P 304/504/505/604, bonded-rubber bushing for the anti roll bar. Diameter: 30mm

Length: 30mm. Inside diameter: 12mm. Or. No. 508709

P 403/404, wheel brake cylinder with 1 piston 30mm,brake line connector 3/8 x

24UNF (9,5mm),403 Bj. 1961->, 404, 404 Comercial, 404 Pick UP. Mounting board bore 21,5mm, , length over all 63,5mm. Made in Europe.

P 403/404/504, differential bearing (front bearing). Suitable for Peugeot 403

404, 504. Outside diameter: 62mm. Inside diameter: 25mm. Overall height: 16,9mm.

Guide sleeve for the horn actuation rod in the steering column. Suitable for

Peugeot 403, 404 partly 504. Material Celaron. 2,7x6x15mm. Or. No. 626305

brake master cylinder, single-circuit brake system, Peugeot 404 07/60-10/66

piston 25,4mm, 504

P 403/404/504, fan blades for Peugeot 403 + Peugeot 404, Peugeot 504 TI 2.0L

(with very minor modifications). Reproduction made of plastic! Outer diameter: 325mm. Diameter for the mount on the water pump: approx. 104mm. Height: 43mm.

wheel brake cylinder repair set 403+404+504 with 30mm piston, fornt

P 403/404/504, wheel bearing set rear. Suitable for Peugeot 403, of year of

construction 1958 to 1966. Peugeot 404 (sedan, Cabriolet + Coupe) of year of construction 1960 to 1975. Peugeot 504 (sedan, Cabrio + Coupe) starting from year of construction 1973. Outside diameter: 72,0mm. Inside diameter: 35,0mm. Overall height: 17,0mm.

P 403/404/504, bonded-rubber bushing mounting plate spring at the rear axle

Peugeot 403, Peugeot 404 + 404 Pick UP, Peugeot 504 Pick UP. Measurements inside 16mm, outside 32mm. Length inside 54mm, outside 50mm

P 403/404/504, shock absorber rear (2 fittings). Suitable for Peugeot 403 Pick

Up, 404 Pick UP + 504 Pick UP. Length over everything: 415mm (compressed) + 650mm (pulled apart). Inside diameter bonded-rubber bushing: 13,4mm. Diameter shock absorber: 50mm.

Ignition lock for Peugeot 403/404/504, without steering lock. Replica.

P 403/404/504/505, gearbox bearing BA7/4 + Ba/5 gearbox. Fits primary shaft on

engine side. Secondary shaft2, opposite engine (rear). Intermediate shaft 1, engine side. For Peugeot 404, Peugeot 504, Peugeot 403, Peugeot 505. Outer diameter:: 75mm. Inner diameter:: 35mm, Overall height: 20mm. The bearing has a groove on the outer ring. Or. No. 2308.10

P 403/404/504/505, bearing for the jackshaft, rear (gearbox BA7). Suitable for

Peugeot 403, Peugeot 404, Peugeot 504, Peugeot 505. Outside diameter: 47mm. Inside diameter: 21,5mm. Overall height: 16.25 mm. Or. No. 2372.11