Search in Peugeot-504 + 604 for

P 403/404/504/J7, brake hose rear, suitable for Peugeot 403, 404, 504, J7

Overall length 480mm. Connections both sides: Male thread 5/8 x 24UNF, female thread 3/8 x 24 UNF. Or.Nr. 445116 + 481607. Made in Europe.

Wheel bearing oil-seal-ring 45x62x12. Peugeot 403, 404, 504, J7. Made in

Germany.

Carburetor repair set Peugeot 403, 404, 504, Simca Rally 1000. Carburetor Solex

34 BICSA 3/12.

P 404, clutch release yoke, for hydraulic clutch. Suitable for Peugeot 404

Diesel, starting from year of construction 1967. Peugeot 305, 309, 405. Citroen C15, Citroen BX 19, starting from 1987. Or. No. 2117.42

• Suitable for this article
• 
  Bush for the clutch fork. Suitable for some Peugeot 205. Citroen C15, BX. Or
  2,13 €

P 404, carburetor 34 BICSA (reproduction). Suitable for Peugeot 404 (engine

XC6). Not suitable for automatic gearbox. Peugeot 403. Peugeot 504 (engine XM7).

• Suitable for this article
• 
  Seal under carburetor, distance plate between intake manifold and carburetor
  5,62 €
• 
  Seal under carburetor for Citroen 2CV, with round carburetor. Inside diameter
  2,18 €

P 404/403/504/J7, sealing ring for the liner, bottom (sealing in the engine

block). Dimensions: 78.2 x 81.8 x 5.0mm. Suitable for Peugeot 403 (engine 8CV TN3). 404 (Engine 8CV + 9CV > 1970). 504 (XM1L8). J7 until 1970. Or. No. 0112.17. Made in Germany

P 404/504, front exhaust collector, mounted on the exhaust manifold

(resonator). Suitable for Peugeot, from 1967 year of construction. Peugeot 504, with 1.8L engine. Or. No. 1720.03

• Suitable for this article
• 
  M8, copper nut, for 12mm open end wrench. For exhausts + exhaust manifolds.
  0,94 €
• 
  Flange gasket for the exhaust pot at the exhaust elbow. Suitable for Peugeot
  4,62 €

P 404/504, clutch release sleeve for Peugeot 404 gasoline + diesel, from year

of manufacture 1967. Peugeot 504 (1.8 + 2.0 gasoline) + diesel. For clutch disc with 8 springs.

Clutch release bearing for Peugeot 404 1967>, 504, first construction, inner

diameter: 33mm, outside: 63,5mm

P 404/504, brake shoes to rivet. 280mm diameter, 62mm wide. Rear axle. Or. No

424562

brake shoe set rear Peugeot 404,504, system Lucas, width 57mm, diameter 254mm

brake shoe set rear 404+504 diameter 280mm, 62mm, system Bendix 404 10.69>

504 Break 04.71>07.86

P 404/504, brake hose from the master brake cylinder to the Hydrovac. Suitable

for Peugeot 404 + 504. Length: 270mm. Thread: Both sides 3/8 x 24 UNF. If 1/2" connections be present , use please adapter pieces 74561 + 74565. Or. No. 458001

• Suitable for this article
• 
  Reduction adapter from 1/2 UNF to 3/8 UNF. For Hydrovac!
  11,79 €
• 
  Brake hose adapter from 1/2x20 (male) UNF on 3/8x24 UNF (female). (for large
  10,90 €

P 404/504, brake hose in front + rear. Suitable for Peugeot 404, of year of

construction 1969 to 1975. Peugeot 504, from 1968 to 08/1975. Peugeot 204, from 1968 to 1970. Length: 375mm. Connection: 1x male thread 3/8x24UNF. 1x male thread 5/8x18UNF with female thread 3/8x24UNF. Or. No. 4816.11 + 4816.12 . Made in Europe.

• Suitable for this article
• 
  Clinch screw. F-flange. Thread: 3/8 x 24UNF. Wrench: 11mm. Suitable for Renault
  1,24 €

P 404/504, spring plate in front. Diameter 165mm. Suitable for Peugeot 404 +

504. Per piece

P 404/504, bonded-rubber bushing for the anti roll bar ouple rod (rear axle)

Suitable for Peugeot 404 + 504. Inside diameter: 10mm. Outside diameter: 27mm. Or. No. 5179.02

P 404/504, Gnmmi underlay on the left, for the metal guide for the cotter

centering wedge. Suitable for Peugeot 404 Cabrio + Coupe. Peugeot 504 Cabrio + Coupe. Mounted in the B-post. Or. No. 9179.04

P 404/504, Gnmmi underlay on the right, for the metal guide for the cotter

centering wedge. Suitable for Peugeot 404 Cabrio + Coupe. Peugeot 504 Cabrio + Coupe. Mounted in the B-post. Or. No. 9179.05

P 404/504, rubber metal bearing for the rear bearing from the strut, at the

front axle. Suitable for Peugeot 404, 504, 505, 604. Inside diameter: 16mm. Outside diameter: 25mm. Length inside: 17mm. Length outside: 12mm. Or. No. 3523.10

P 404/504, neck journal bearing flange (outlet cardan shaft at the gearbox)

Suitable for Peugeot 404 + 504. Or. No. 2608.10

P 404/504, neck journal bearing flange mounting kit. Suitable for Peugeot 404 +

504.

P 404/504, neck journal bearing flange sealing ring (O-ring). Dimension: 65 x

59 x 6mm. Suitable for Peugeot 404 + 504.

P 404/504, exhaust pipe bracket in front of the gearbox. Suitable for Peugeot

404 + 504. Or. No. 1714.11

P 404/504, master brake cylinder dual circuit. Piston diameter: 25,4mm

Suitable for Peugeot 404 U10/UXD. Peugeot 504 BREAK 1,8L petrol + Diesel 1,9L + 2,1l, starting from year of construction 1973. Brake line connector: 2x 3/8 x 24UNF. Connection brake fluid reservoir: 5/8 x 18. Or. No. 4601.78. Made in Europe.

P 404/504, cardan shaft. 1826mm long. External toothing: 25 teeth. Internal

teeth: 25

P 404/504, cardan shaft center bearing. Outside diameter: 55mm. Inside

diameter: 47mm. 16mm wide. Suitable for Peugeot 404 + 504. Or. No. 2811.08

P 404/504, trunk lock completely. Only suitable for sedan. Note: Does not fit

at Cabrio or Coupe!!!

P 404/504, trunk lock, suitable for Peugeot 404 BREAK (all years of

construction) + 504 BREAK (to year of construction 31.05.1973). Orignal manufacturer Neiman. No reproduction. Neiman No. 902131

P 404/504, carbon brush for the disengageable fan blade at the water pump

Suitable for Peugeot 203, 403, 204, 304, 404, 504. Or. No. 126713 + 140421

P 404/504, piston rings, for 1 piston. Suitable for Peugeot 404, 504, J7

Engine: XC5, XC6, XC7. Compression: 7,6: 1. Bore: 84mm. Piston rings: 2,0 + 2.0 + 4,5mm.

• Suitable for this article
• 
  piston ring presenting pliers for diameter 40-100.
  22,71 €
• 
  Piston ring compressor, 60 to 90mm clamping range. Hobby version (not for daily
  16,76 €

P 404/504, radiator hose above. Suitable for Peugeot 404, of year of

construction 1960 to 1975. Peugeot 504. Inside diameter: 55,0 + 40,0mm. Or. No. 1343.25

P 404/504, radiator hose down. Suitable for Peugeot 404 Diesel, of year of

construction 07/1970 to 1975. Peugeot of 504 Diesels. Engines: XD88 + XD90. Inside diameter: 35mm + 39mm. Or. No. 1350.38

P 404/504, clutch release yoke for BA7 gearbox (Bowden cable). Suitable for

Peugeot 404, starting from year of construction 1967. Peugeot 504 + 505. Length: about 195mm. Or. No. 2117.41

P 404/504, clutch completely (Diesel). Suitable for Peugeot 404 D. Peugeot 504

D. Engines: XD88 (1,9L), XD90 (2,1L) to year of construction 07/1981, XD2 (2,3L) to year of construction 07/1981. Reproduction with centering mandrel. Diameter: 215mm. Teeth: 10. Or. No. 2004.90

P 404/504, clutch completely (reproduction). Suitable for Peugeot 404, starting

from year of construction 10/1967. Peugeot 504. 4 liners petrol (engine capacity: 1796cc + 1971cc). Diameter: 215mm. Teeth: 10. Or. No. 2001.90 + 2004.89

P 404/504, clutch set, suitable for Peugeot 404, starting from year of

construction 10/1967. Peugeot 504 (petrols), starting from year of construction 07/1968. For gearbox 4M (small clutch release sleeve). Diameter: 215mm. Number of teeth: 10. Hub profile: 10x24,5x29. Or. No. 2001.90 + 2004.89 + 2050.27.

P 404/504, clutch taking cylinder. Piston diameter: 28,57mm. Suitable for

Peugeot 404, starting from year of construction 01/1969. Peugeot 504, starting from year of construction 09/1968 (sedan + Cabriolet). Peugeot J7. Connection: M12x1. Or. No. 2086.04 + 2086.08. Made in Europe.

• Suitable for this article
• 
  Clutch line sealing ring (for the line between clutch taker + clutch
  1,18 €
• 
  Clutch line screwed joint. Thread: M12x1. Inside diameter: 6,5mm. Suitable for
  2,04 €
• 
  Clutch line support sleeve. Inside diameter: 4,0mm. Suitable for Peugeot 204
  1,14 €
• 
  P 404/504, circlip for clutch slave cylinder (72351 + 72224). For 36mm groove
  1,49 €

P 404/504, clutch taking cylinder. Piston diameter: 28,58mm. Connection thread

M10x1. Mounting holes center to center: 48mm. Length over everything (without collar): 90mm. Suitable for Peugeot 404 to Ident: CH1012372. Peugeot 504 sedan + Cabrio, of year of construction 1/1969 to 1974. Peugeot 304 + J7. Talbot Murena, of year of construction 8/1981 to 1/1985. Or. No. 2086.11 + 2086.13. Made in Europe.

• Suitable for this article
• 
  Clutch line sealing ring (for the line between clutch taker + clutch
  1,18 €

P 404/504, crankshaft bearing, standard dimension. Suitable for Peugeot 404

from year of construction 1970. Peugeot 504 (03/1971 - 10/1971). Peugeot 505 (09/1980 - 10/1981). J5 (03/1980 - 10/1981). J7 (09/1968 - 03/1980). For engines: XC5P, XC6, XC7, XC7P, XM7P, XN1, XN1P. 1618cc, 1796cc, 1971cc. Or. No. 011315, 011317, 011318.

P 404/504, crankshaft bearing, oversize 0,30. Suitable for Peugeot 404, from

year of construction 1970. Peugeot 504 (03/1971 - 10/1971). Peugeot 505 (09/1980 - 10/1981). J5 (03/1980 - 10/1981). J7 (09/1968 - 03/1980). For engines: XC5P, XC6, XC7, XC7P, XM7P, XN1, XN1P. 1618cc, 1796cc, 1971cc.

P 404/504, crankshaft bearing, oversize 0,50. Suitable for Peugeot 404, from

year of construction 1970. Peugeot 504 (03/1971 - 10/1971). Peugeot 505 (09/1980 - 10/1981). J5 (03/1980 - 10/1981). J7 (09/1968 - 03/1980). For engines: XC5P, XC6, XC7, XC7P, XM7P, XN1, XN1P. 1618cc, 1796cc, 1971cc. Diameter 58,9/58,0/56,7/56,65/54,4 width 29,5/21,5/29,3

P 404/504, crankshaft bearing, oversize 0,80. Suitable for Peugeot 404, from

year of construction 1970. Peugeot 504 (03/1971 - 10/1971). Peugeot 505 (09/1980 - 10/1981). J5 (03/1980 - 10/1981). J7 (09/1968 - 03/1980). For engines: XC5P, XC6, XC7, XC7P, XM7P, XN1, XN1P. 1618cc, 1796cc, 1971cc.

P 404/504, generator, suitable for Peugeot 404, Peugeot 504, J5, J7. 12 V

Ampere: 50. Intergrierter battery charging regulator. Assembly position: 20°. Belt pulley: 67mm. the starter motor is a new part. An old part return is not necessary!

P 404/504, air filter Diesel. Suitable for Peugeot 404D, to year of

construction 08/1971. Peugeot 504D, to year of construction 08/1972. Outside diameter: 110mm. Inside diameter: 80mm. Height: 125mm. Corresponds to PURFLUX A431. Or. No. 1445.35

P 404/504, oil exhausting hose. Suitable for Peugeot 404 + 504. Or. No. 1190.15

P 404/504, Panhard rod + anti roll bar repair set, for the rear axle. Suitable

for Peugeot 404 BREAK + Pick UP. Peugeot 504 sedan, Coupe, Cabriolet. 504 BREAK + Pick UP. Bonded-rubber bushing: Ø 12 x Ø 30mm, length 42 x 36mm (5171.01). Screw: M12x70mm (5173.03). Nut M12 (3431.01).

P 404/504, piston pin bushing (4 pieces). Suitable for Peugeot 404, 504, 505

604. Inside diameter: 22,5mm. Outside diameter: 24,4mm. Overall height: 27,0mm. Or. No. 0604.14

wheel brake cylinder rear left Peugeot 404+504. System Bendix, 20,64mm piston

connection 3/8 24UNF (9,525mm). 404 all models with themostable brakes starting from 1969 504 10/70 till 01/71. Overall length 84mm. Made in Europe.

P 404/504, wheel brake cylinder at the rear left, suitable for Peugeot 404

starting from year of construction 5/1968. Peugeot 504 (1.9 + 2.1 Diesel), of year of construction 1970 to 1975. Brake system Bendix. Piston diameter: 22,22mm. Brake line connector: 3/8 x 24UNF. Length totally: about 72mm. Or. No. 4402.24. Made in Europe.

P 404/504, wheel brake cylinder at the rear left, Peugeot 404 + 504, system

Bendix, 22mm piston, M10x1 connection, mounting board bore = 36 mm, length over everything = 82 mm. Made in Europe.