diameter: 28,57mm. Brake line connector: 3/8 x 24UNF. Mounting board bore: 36mm. Length over everything: 82mm. Suitable for Peugeot 404, starting from year of construction 10/1969. Peugeot 504 Pick UP, of year of construction 06/1979 to 09/1981. Or. No. 4402.29. Made in Europe.
Connection 3/8 24UNF (9,525mm). 404 all models with thermostable brakes starting from 1969 504 10/70 till 01/71. Overall length 84mm. Made in Europe.
starting from year of construction 5/1968. Peugeot 504 (1.9 + 2.1 Diesel), of year of construction 1970 to 1975. Brake system Bendix. Piston diameter: 22,22mm. Brake line connector: 3/8 x 24UNF. Total length: about 72mm. Or. Nr. 4402.22. Made in Europe.
Bendix, 22mm piston, M10x1 connection, mounting board bore = 36 mm, Length over everything = 82 mm. Made in Europe.
diameter: 28,57mm. Brake line connector: 3/8 x 24UNF. Mounting board bore: 36mm. Length over everything: 82mm. Suitable for Peugeot 404, starting from year of construction 10/1969. Peugeot 504 Pick UP, of year of construction 06/1979 to 09/1981. Or. No. 4402.28. Made in Europe.
of construction 10/1976). Dimension bearing 1: 52 x 20 x 15mm. Bearing 2: 62 x 30 x 16mm. Or. No. 3748.01
10/1976. Very good quality! Measurements: 1x bearing 30 x 62 x 16,0mm + 1x bearing 20 x 52 x 15mm. 1x shaft seal, 1 nut. Or. No. 374801
Peugeot 404 Cabrio + Coupe. Peugeot 504 Cabrio + Coupe. Mounted in the B-post. Or. No. 9179.03
for the door. Suitable for Peugeot 404 Cabrio + Coupe. Peugeot 504 Cabrio + Coupe. Mounted at the door. Or. No. 9178.07 + 9178.08.
diameter. Suitable for Peugeot 404 + 504, 505, J7.
504. Inside diameter: 8,0mm. Outside diameter: 20,0mm. Length inside: 21,0mm. Length outside: 14,0mm. Or. No. 2436.32
404 + 504. Or. No. 5094.02
for Peugeot 404 + 504
Peugeot 504 (injection engine). Or. No. 0321.15. Made in Germany.
Peugeot 404 + 504. Or. No. 0318.46
shock absorbers have a threaded pin on both sides! Length when pushed together: 420mm. Length extended: 650mm.
34mm. Suitable for Peugeot 404 (U6S, starting from series of 7.160.001 + 7.162.001). Peugeot 504 to salon 1971 (starting from series of A93: 1.120.401). Carburetor index: 51. Original SOLEX carburetor, no reproduction. Or. No. Solex: 12572 000. Or. No. Peugeot: 1415.56
Suitable for Peugeot 404 + 504.
504. For 1,6, 1.8, 2,0L engines (XM/XM7). The water pump is for the second version, with disengageable fan blade. Length of the shaft: 55mm. 4x connection. Or. No. 1201.79 + 1202.70 + 1202.71 + 1202.61
Peugeot 504. Engine: For 1,6, 1.8, 2,0L (XC7). Installed starting from year of construction 1960. The water pump is for the first version, with disengageable fan blade. Length of the shaft: 53mm. 3x connection (1x plugged). Or. No. 1202.60, 1202.12, 1202.36, 1202.48, 1202.59, 1202.84
504. Engine: For 1,6, 1.8, 2,0L (XC7). Installed starting from year of construction 1960. The water pump is for the first version, with rigid fan blade. Length of the shaft: 37mm. 3x connection. Or. No. 1202.13 + 1202.37
1,6, 1.8, 2,0L engines (XM/XM7). The water pump is for the second version, with rigid fan blade. Length of the shaft: 37mm. 4x connection. Or. No. 1201.78 + 1202.69 + 1202.83 + 1202.72 + 1202.76
Partial Peugeot 505. The shock absorber has down a bonded-rubber bushing, above threaded pin!
267x44x5mm + 2x 219x44x5mm. Suitable for Peugeot 404, 504 + 505. Or. No. 4245.93
504 + 505. Thread: M12x1,5. Length: 64mm. Or. No. 6913.61
Suitable for Peugeot 404, of year of construction 11/1967 to 12/1971. Peugeot 504 (1796cm ³, 1971cm ³, 2664cm ³) sedan, BREAK, Cabriolet + Coupe. Peugeot 505 (all engines). Number of teeth: both sides 25. Or. No. 2619.17
Suitable for Peugeot 404, starting from year of construction 1967. Peugeot 504, Peugeot 505. Or. No. 2117.39
Peugeot 504, Peugeot 505. Outside diameter: 75mm. Inside diameter: 35mm. Overall height: 20mm. Or. No. 230810
01/1970 (engine XC7, CM7). 504/505 from 01/1971 (engine XM7, XN1, XN1A). J7 (engine XM7P + XC7P). Engines until year of construction 06/1984
Suitable for Peugeot 404, starting from year of construction 1967 (all petrols). Peugeot 504 + 505 petrols, with 215mm pressure plate and 6 springs in the clutch disk.
504 Diesel, 505 Diesel. Hole spacing: 85mm. Or. No. 1807.28
504 + 505. The engine suspension fits on the left of or on the right. Engine: XN6. Hole spacing: 86 mm. Or. No. 1807.25
505. Or. No. 0515,46 + 0515E2. Diameter: 13,10cm. Outside diameter of the scroll seal: 45,35mm.
Suitable for Peugeot 404, 504, 505. Inside diameter: 16mm. Outside diameter: 32mm. Length inside: 69mm. Length outside: 60mm. Or. No. 5131.39
(full-floating axle). Dimension: 53 x 79 x 10mm. Suitable for Peugeot 404, 504, 505. Or. No. 3345.31
Peugeot 504 (carburetor) + 505 (carburetor). Or. No. 0321.11. Made in Germany.
505, J5 Citroen C25. All fuel engines (XM7 + XN1) from 1,6L to 2.0 liters engine capacity. Thread: M12. Length: 144mm. Or. No. 0204.21.
Peugeot 504 + 505 for petrol engines to 1971cc. Citroen C25 petrol. Or. No. 0249.14
J7, J9. Petrol engines 1.6 + 1,8L (XM7, XM7A, XC7, XC7P, XM, XM7P). 86 mm bore. Inclusive Cylinder head gasket. Original supplier! Delivery without liners sealing rings!
06/1968 to 02/1971 and for 604 from 09/1979 to 05/1983. Inside diameter: 12mm, outside diameter: 30mm, heigth: 24mm.
elbow). Suitable for Peugeot 404. Peugeot 504, J7. Peugeot 604, starting from serial number 655429 (for 604, you need 2 pieces). Outside diameter: 57mm. Inside diameter: 43mm. Or. No. 1710.07
19mm. Suitable for Peugeot 204, 304, 404, 504, 505, 604, J7.
XDP4.90, XDP88, XDP90, XDPX90. (1948cc + 2112cc). Suitable for Peugeot 404 D, 504 D, 604 D, J7 Diesel. Citroen HY Diesel. Or. No. 0203.70
J7, J9. Citroen C25. Suitable for petrol engines 1,6L + 1,8L. Installed starting from 09/1970 ((XM7, XM7A, XC7, XC7P, XM, XM7P). 1,73mm heavily. 4 grooves.
Citroen HY Diesel + Peugeot 404 D + 504 D. Without shaft seals
Select your Citroen 
Please select your Peugeot 
Please select your Citroen Renault 
