Complete rear light. Suitable for Citroen ACDY (Dyane Van- Acadiane) + Peugeot
504 Pick Up + Peugeot J7. The rear lights have an "E" approval mark!
Search in Peugeot-504 + 604 for
1654 Articles | Page 28 of 34
Taillight cap, befitting for Citroen ACDY (Dyane Van), Mehari 4x4, + Peugeot
404 Pick UP, 504 Pick UP, J7. Fits on the left + on the right.
Reflector square, framed in metal. With fixing straps, dimensions approx
60x45mm. These reflectors were used in many French cars!
Scrapers professional version, to remove of labels on disks, engine sealing
g remainders scrape etc. off.
Switch - push button, square, with chrome frame. Universally suitable. Please
note: this is a push button and not a toggle switch. The push button is useful for electric windscreen washers, horns or headlight flashers, for example. Dimensions: 36x18mm (French standard size). Suitable for Peugeot, Citroen, Renault.
Square switch with chrome frame. The switch also has an indicator light (bulb
base Ba9s). Universal switch for e.g. heater blowers, additional consumers.... Dimensions: 36x18mm (French standard size). Suitable for Peugeot, Citroen, Renault.
Gear lever (tie bar) for the gear shift. For ball: 10,0mm. Overall length: 108
124mm. Or. No. 2454.52
Gear lever (tie bar) for the gear shift. For ball: 10,0mm. Overall length: 120
135mm. Or. No. 2454.94
Gear lever (tie bar) for the gear shift. For ball: 10,0mm. Overall length: 85
102mm. Suitable for Peugeot 504. Or. No. 2454.55
Gear lever (tie bar) for the gear shift. For ball: 10,0mm. Overall length: 93
1110mm. Or. No. 2454.95
Gear lever (tie bar) for the gear shift. For ball: 13,0mm. Overall length
240mm - 255mm. Or. No. 2452.62
Gear lever (tie bar) for the gear shift. For ball: 13,0mm. Overall length: 241
256mm. Or. No. 2452.13
Gear lever (tie bar) for the gear shift. For ball: 13,0mm. Overall length: 283
300mm. Or. No. 2452.20
Gear lever (tie bar) for the gear shift. For ball: 13,0mm. Overall length: 295
308mm. Or. No. 2444.49
Rod eye for ball stud of the shift linkage (steering columm gear shift change)
Suitable for Peugeot 204, 304, 404, 504. Inside diameter: 12mm. Outside diameter: 19mm. Or. No. 2445.09
Foam material plates (2 fittings) 15mm thick, 1200x600mm. Universal for seats
carpet, door linings etc.
Foam material plates (2 fittings) 15mm thick, 580x580mm. Universal for seats
carpet, door linings etc.
Discs (windscreen) Pull-in tool (cord with handle). This is used to pull the
rubber lip of the seal over the sheet metal fold. Very helpful!
Windscreens (windscreen) piping assembly tool - bracket inserts. For small
piping. There are 5 brackets in different widths so that narrow and wide piping can be fitted (e.g. for the 2CV, R4....). Suitable for tool with item number 20134.
Windscreen Installation Tool Set. Windshield sealing trim assembly tool. With
this tools will the rubber lip (seal) inclination (spread) and it can fit the sealing trim at the same time. Attention: The tool is for very wide piping. For chrome piping e.g. Citroen 2CV, Renault R4 etc. small brackets must be fitted. See our item number 20137.
Permanently elastic window sealant. Original Teroson! 75ml tube. Application
Ideal for sealing rubber-mounted front, rear and side windows. Very stable, water resistant, remains elastic. Good adhesion even on damp windscreens.
Vehicle Window sealant permanent elastic. Original Teroson! Cartouche 310ml
Application: Ideally to sealing rubber-mounted front. - Tail and side windows. Very stably, water-resistant, remains elastic. Good adhesion also on wet disk.
Windscreen washer reservoir - plastic bag with integrated electric water pump
12 volts. The reservoir is supplied with mounting and accessories and can be installed in any vehicle, e.g. Citroen Mehari, Renault R4 first versions, etc. This type of windscreen washer reservoir has also been installed in many Italian vehicles (Alfa Romeo Spider...).
Washer reservoir electrical with built-in set for 2CV and other classical cars
s. Complete with push-button, cable, cross bars etc. very practical and small. Width 19,5cm, height of 16,5cm, depth 5,5cm
Washer reservoir with integrated, electrical water pump. 12 V. Capacity: 1.2 L
width: 122mm, overall height totally: 185mm. Building depth altogether: 100mm. The reservoir is supplied with fixture. The fixture is from the rear at the reservoir.
Wiper nozzle synthetic grey. Universal fitting. 4mm hose connection. The wiper
nozzle is locked with a nut from rear. 1 water jet. Low body height. Mounting diameter: 8,0mm.
Wiper nozzle cleaning and adjustment tool! Sturdy adjustment point, light
cleaning stick. Both ends with end cap.
Windscreen washer nozzle black. Universal fitting. 4mm hose connection. The
washer nozzle is screwed with a nut from behind. 2x water jet. Flat design.. Mounting diameter: 9,5mm.
Washer pump electrical. 12 V. Very stable version with galvanized metal
fixture. 2x flat plug connection from above! Made in the European Union. The picture indicates the correct mounting position. The pump section is down, the electric motor above!
Washer pump, electrically, color black. Suitable for Citroen DS. This pump is
to be used also very well for conversion, e.g. 2CV, Dyane, Peugeot, Renault. Note: The pump is not self-priming. The water must run (from alone) inside. Outlet water = power connection side. If the pump works more than 15 seconds without water, it is broken.
Washer pump, for mounting outside of the water reservoir! 12 V. Suitable for
Peugeot 104, 304, 504, 505, 604. Or. No. 643422
Foot-operated pump set for windschield wiper fluid. Consisting of foot pump, 2
return flow stoppers, 1x T-valve, 3 meters hose. Assembly: Starting from the foot pump with the T-valve, 1x to the reservoir (place the valve in such a way that the water from the reservoir can pass through) and 1x to the windshield washer nozzle (valve lets the water pass in the direction of the nozzle). The flow directions are marked with an arrow on the valve. Assembly instruction online in the shop.
PDF FILE Windscreen washing water hand pump. Reproduction, completely with sheet metal
holder for a later mounting! Suitable for Citroen 2CV. In addition, the pump can be universal installed.
Disks washing water return stop (valve). Connection: 5mm. This valve is an
genuine improvement for classical vehicles, which pump the water by a hand pump. Please observe flow direction when assembling!
Windscreen washer fluid reservoir, universal. The set is supplied with: Washer
reservoir, electric pump, 2x washer nozzles with 2 jets, electric button, installation material. The washer reservoir can be pulled out of its holder. Very good set for retrofitting or conversion. Our recommendation. 12 volt. The washer tank can be retrofitted to many vehicles. E.g. Renault R4, R5, Citroen 2CV, HY, DS, Peugeot 404, 504 etc. Water tank dimensions (overall): Width: 12.5cm. Depth: 11cm. Height: 19.5cm.
Headlamp mounting bolt (stud bolt with ball). Dimension: 5 x 36mm. Thread: M5
Universal suitable for many French vehicles.
Universal protective rubber (e.g. for protecting electric cables, brake lines
brake hoses, handbrake cables, speedometer cables, petrol hose... External dimensions: 23x30mm. Inner diameter: 8mm. The rubber is slit on one long side, and can therefore be easily placed over the cable to be protected!
Universal protective rubber (e.g. for protecting electric cables, handbrake
cables, petrol hose... External dimension: 42mm. Length: 31mm. Inner diameter: 12mm. The rubber is not slit (but of course this can be done afterwards if it makes assembly easier)
Tube bending sleeve. Suitable for hose outer diameter of 12,5 > 13,4mm. Length
60mm. With this you can easily produce bent water hoses. Simple and ingenious!
Tube bending sleeve. Suitable for hose outer diameter of 14,6 > 16,4mm. Length
65mm. With this you can easily produce bent water hoses. Simple and ingenious!
Tube bending sleeve. Suitable for hose outer diameter of 16,5 > 18,4mm. Length
70mm. With this you can easily produce bent water hoses. Simple and ingenious!
Tube bending sleeve. Suitable for hose outer diameter of 18,8 > 21mm. Length
75mm. With this you can easily produce bent water hoses. Simple and ingenious!
Tube bending sleeve. Suitable for hose outer diameter of 21,8 > 24mm. Length
90mm. With this you can easily produce bent water hoses. Simple and ingenious!
Hose clamp 11-17mm, especially for radiator hose. Vintage look. Embossed band
with raised edges. This prevents the hose from being damaged. Small screw housing with 7mm hexagon head screw (with slot). Normal, modern hose clamps squeeze the hose. This is completely avoided with these clamps. And they even look better.
Hose clamp 13-20mm, especially for radiator hose. Vintage look. Embossed band
with raised edges. This prevents the hose from being damaged. Small screw housing with 7mm hexagon head screw (with slot). Normal, modern hose clamps squeeze the hose. This is completely avoided with these clamps. And they even look better.
1654 Articles | Page 28 of 34
Select your Citroen 
Please select your Peugeot 
Please select your Citroen Renault 
