problem when the 2CV does not draw petrol after a long winter break (and it was forgotten to make the petrol stable with an additive before the break). Consisting of: fuel sender with seal, fuel line all the way, petrol pre-filter, petrol pump with spacer plate and screw connection, hose clamps. Simply everything you need to replace the entire intake side from the tank to the carburettor!
connection 5-6mm. Universal fitting.
model. Better start after long immobilisation time. The membrane of the fuel pump does not run dry quickly. Indispensable for vintage cars. For fuel hose with 5,5 - 7,5 mm internal diameter. Diameter 34mm. Construction length totally 100mm.
polyamide'. Natural colour (as original). This polyamide line is resistant to modern fuels containing ethanol! Inner diameter: 4.0 mm. Outer diameter: 6.0 mm. The line fits into the original fuel line holders on the side of the chassis. The line is mounted on the side of the chassis and connects the tank and the fuel pump. Length: 2950 mm
pump with hand lever. Because most of 2 cv do not run much and because of high percentage of Ethanol in fuel, the gasoline pump desiccates. With this gasoline pump it is possible to pump fuel by hand, saving the battery after long immobilisation time. Made in EEC.
64mm. Tappet length: 64mm. Or.No.: A1738A
inserted normally only with sealing compound. Made in Germany
Chromated surface, the heads of the push rod are hardened! Suitable for the following engines: A79/1, M28, M28/1. Or. no. AY173-99. Made by Franzose/CiPeRe in Europe.
e following engines: A79/1, M28, M28/1. Or. no. AY173-99
1968, Renault, Peugeot. This seal replaces the paper gasket and is made of "KLINGERSIL". 0,5mm thick. Klingersil is an extremely resistant material, against oils, petrol, alcohol etc.
cut, return not-possible!
cut, return not-possible!
Customer cut, return not-possible!
Diameter: 5,5mm. Fasten please the hose with a hose clamp. Customer cut, return not possible!
identical, to the early time used hoses. Customer cut, a return is not possible!
all 2 and 4-stroke engines. Ideal for our classic cars. Prevents corrosion in the tank and in the entire fuel system. Antioxidants prevent the fuel from ageing (the petrol remains ignitable). Binds and neutralises condensation in the tank. Eliminates starting difficulties when the vehicle has not been used for a long time. And as a special feature, the petrol additive has an octane booster. It therefore increases the ignitability of the petrol (knock resistance). Particularly interesting for regions in this beautiful world where there is no super petrol with at least 98 octane, or if you are involved in motor sports! Packaged in a high-quality aluminium can. Contents: 150ml. Application: 150ml is sufficient for 20 litres of petrol. Fill the tank completely. Fill in the fuel additive. Run the engine for 10 minutes. Done!
corrosion in the entire fuel system. Ensures problem-free immobilization of vintage cars, convertibles, motorcycles, scooters, quads, lawnmowers, chainsaws, and other petrol-driven 2-stroke and 4-stroke engines. Increases operational safety. With long-term effect. 25 ml from the dosing device preserve 5 l fuel. Before decommissioning, add the appropriate quantity to the tank and allow the engine to run for approx. 10 minutes.
After more than 30 years, the plastic fuel tanks tend to become brittle (especially at the seam) and can leak (unfortunately a problem of age and modern petrol).
Citroën 2CV, Dyane, Mehari. Diameter: 25 mm. Height: 10 mm. Bore: 8.3 mm.
tank at the chassis. Suitable for Citroen 2CV.
are our own reproductions with removable cover. (round cover with 6 mm screw in the middle). Diameter about 41,4mm, bore 10,3mm.
(Vehicles with light brake lines. 3,75mm). Reproduction, optically and technically like original.
Dyane4+6, AK, ACDY, Mehari, AMI. This metal clamp is simply mounted with a screw. It can be used to attach the brake line and the petrol line at the same time. Older 2CVs up to the 1970s also had the clamp mounted on the chassis from above (1x behind the headlight carrier for the petrol line) and 1x below the main brake cylinder on the chassis (for the brake line).
catalog are our own reproductions with removable cover. (round cover with 6 mm screw in the middle). Measurements about 44 x 36mm. 2mm heavily.
improvement for classic vehicles that use a hand pump without a ball valve to deliver water. This ensures that windscreen washer fluid is always available at the spray nozzles. Please note the direction of flow during installation! It also prevents petrol from flowing back in the fuel line (useful for longer periods of inactivity). Please install this valve close to the petrol pump (between the petrol pump and the tank).
Before you use the lock, please lubricate it! Note: Close and open the fuel filler cap only by a 1/4 turn! Otherwise the locking teeth can be damaged.
are really well made. They also have a fuel vent, of course. Considering the price and quality, we highly recommend them.
1990, Citroen DS up to 1974, HY from 09/1968, 11CV from 7/1952.
n 1967. Citroen AZU. Citroen HY, to year of construction 09/1968.
n 1967. Citroen AZU. Citroen HY, to year of construction 09/1968.
n 1967. Citroen AZU. Citroen HY, to year of construction 09/1968.
PDF FILE 
VIDEO 
Select your Citroen 
Please select your Peugeot 
Please select your Citroen Renault 
