2CV6, heat exchanger (heat exchanger), exhaust pipe on the left in the heat exchanger. As
substitute for through-rusted pipes. Caution, it is only the pipe, not the kompette heat exchanger.
heating and ventilation for Peugeot Mehari
48 Articles
2CV6, heat exchanger, exhaust pipe on the right in the heat exchanger. As substitute for
through-rusted pipes. Caution, it is only the pipe, not the kompette heat exchanger.
Fresh air hose on the left or on the right into the dashboard, for Citroen Mehari. Diameter 50mm
length 1100mm. Per piece!
Heating air fan for the installation into the heating hose of Citroen 2CV. The hose is cut through
and mounted then the fan between the heating hose ends. Optically almost invisibly. The mounting material is provided. The fan has the following dimensions: 80mm diameter, construction length 50mm.
Heater hose on the left of Citroen Mehari. Diameter 70mm, 580mm long, isolate with 10mm foam
m material. Heat exchanger to distributor in the front wall.
Heater hose on the right of Citroen Mehari. Diameter 70mm, 490mm long, isolated with 10mm foam
material. Heat exchanger to distributor in front wall.
Heater cable sheet metal holder, securement of the heater cable on the heat exchanger. This sheet
metal holder is for both heater cables. Suitable for Citroen 2CV.
Heater cable sheet metal holder, securement of the heater cable on the heat exchanger. This sheet
metal holder is for one heater cable. Suitable for Citroen 2CV.
Heater cable short, suitable for Citroen 2CV, for all years of construction. Installed one between
the heating exchangers in the engine compartment. Depending upon year of construction it can be possible that the cable must be cut.
Heater cable tension force clamp (wide) on the heat exchangers, for Citroen 2CV. With this tension
force clamp the two heater cables are adjusted. Significant after production from the European Union. Or.Nr. AZU 644-101
Heater cable tension force clamp (wide) on the heat exchangers, for Citroen 2CV. With this tension
force clamp the two heater cables are adjusted. Or.Nr. AZU 644-101
Cable tie made of rubber, for 2CV/DS, like the original. Length: 320mm, breadth: 12mm. Made in
Germany. Now manufactured from improved material (NBR/SBR fabric rubber)
Clamp for attaching the heating cable to the heat exchanger. The clips are at the end of the heater
cable and are clipped onto the heat exchanger. Suitable for Citroen 2CV, old version. On a 2CV6, the cables on the heater exchanger have been screwed on since 1977.
Clip for the securement heater cable at the heat exchanger. Suitable for Citroen 2CV, old version
With a 2CV6, since 1977, the cable are screwed on to the heat exchanger.
Clamp for heating cable, left + right, attachment to the heat exchanger. (narrow + wide clamp)
Includes 1x heating cable clamp + 2x retaining plate for the heating cable. Reproduction. Please note: The clamps have 5.0 mm holes (new version). For Citroën 2CV, Dyane, Mehari. Or. No. AZ124-12 + AM142-12.
Clip heater cable on the left, securement on the heat exchanger. (narrow clip). Reproduction. Note
The clip has 4,5mm hole bore (old version). For Citroen 2CV. Or.Nr. AZ124.12
Clip heater cable on the left, securement on the heat exchanger. (narrow clip). Significant
reproduction from the European Union, yellow galvanizes. Note: The clip has 5,0mm hole (new version). For Citroen 2CV. Or.Nr. AZ124.12
Clip heater cable on the right, securement on the heat exchanger. (wide clip). Significant
reproduction from the European Union, yellow galvanizes. Note: The clip has 5,0mm hole (new version). For Citroen 2CV. Or.Nr. AM14212
Clip heater cable on the right, securement on the heat exchanger. (wide clip). Reproduction. Note
The clip has 4,5mm hole (old version). For Citroen 2CV. Or.Nr. AM14212
Knob from rubber, for the opening mechanism of the Ventilation shutter, suitable for Citroen 2CV
HY, 11CV. With the 2CV of the final years of construction, is the knob also for the headlight vertical adjustment Installed.
Knob for opening mechanism of the Ventilation shutter. Color blue, production from hard plastic
Suitable for Citroen 2CV, HY. 11CV. At the 2CV the knob was also Installed for the headlight vertical adjustment.
Knob for opening mechanism of the Ventilation shutter. Color cream, production from hard plastic
Suitable for Citroen 2CV, HY. 11CV. At the 2CV the knob was also Installed for the headlight vertical adjustment.
Knob for opening mechanism of the Ventilation shutter. Color grey, production from hard plastic
Suitable for Citroen 2CV, HY. 11CV. At the 2CV + AMI6 the knob was also Installed for the headlight vertical adjustment.
Knob for opening mechanism of the Ventilation shutter. Color white, production from hard plastic
Suitable for Citroen 2CV, HY. 11CV. At the 2CV the knob was also Installed for the headlight vertical adjustment.
Knob for opening mechanism of the Ventilation shutter. Color green, production from hard plastic
Suitable for Citroen 2CV, HY. 11CV. At the 2CV the knob was also Installed for the headlight vertical adjustment.
Knob for opening mechanism of the Ventilation shutter. Color orange, production from hard plastic
Suitable for Citroen 2CV, HY. 11CV. At the 2CV the knob was also Installed for the headlight vertical adjustment.
Knob for opening mechanism of the Ventilation shutter. Color red, production from hard plastic
Suitable for Citroen 2CV, HY. 11CV. At the 2CV the knob was also Installed for the headlight vertical adjustment.
Knob for opening mechanism of the Ventilation shutter. Color black, production from hard plastic
Suitable for Citroen 2CV, HY. 11CV. At the 2CV + AMI6 the knob was also Installed for the headlight vertical adjustment.
Radiator Fin Straightener. Designed for straightening fins and removing debris from vehicles
radiators and air conditioning condensers. One tool with 6 different combs works on any vent or grill. The use of this tool allows the radiator or air conditioning grill to work correctly. Also use on air conditioning grills. Also suitable for oil and water radiators/condensers and evaporators
Collars clip strap with lock (made from metal). Overall length: about 500mm. Width: 5,0mm. These
universal clip straps were in former times Installed at many French car´s. So also at radiator hoses, collar drive shafts etc.
Nut for the handwheel of the headlight adjustment and the Ventilation shutter. Suitable for Citroen
2CV. Heater adjustment for Citroen HY + DS19
Hose clamp 11-17mm, especially for radiator hose. Vintage look. Embossed band with raised edges
This prevents the hose from being damaged. Small screw housing with 7mm hexagon head screw (with slot). Normal, modern hose clamps squeeze the hose. This is completely avoided with these clamps. And they even look better.
Hose clamp 13-20mm, especially for radiator hose. Vintage look. Embossed band with raised edges
This prevents the hose from being damaged. Small screw housing with 7mm hexagon head screw (with slot). Normal, modern hose clamps squeeze the hose. This is completely avoided with these clamps. And they even look better.
Hose clamp 15-24mm, especially for radiator hose. Vintage look. Embossed band with raised edges
This prevents the hose from being damaged. Small screw housing with 7mm hexagon head screw (with slot). Normal, modern hose clamps squeeze the hose. This is completely avoided with these clamps. And they even look better.
Hose clamp 19-28mm, especially for radiator hose. Vintage look. Embossed band with raised edges
This prevents the hose from being damaged. Small screw housing with 7mm hexagon head screw (with slot). Normal, modern hose clamps squeeze the hose. This is completely avoided with these clamps. And they even look better.
Hose clamp 22-32mm, especially for radiator hose. Vintage look. Embossed band with raised edges
This prevents the hose from being damaged. Small screw housing with 7mm hexagon head screw (with slot). Normal, modern hose clamps squeeze the hose. This is completely avoided with these clamps. And they even look better.
48 Articles
Select your Citroen 
Please select your Peugeot 
Please select your Citroen Renault 
