for Peugeot R4
1984 Articles | Page 29 of 40
R4/Estafette, locking knob for the sliding window (original Renault, no replica!). Suitable for
Renault R4 + Estafette. Colour: grey! Attention: Including all mounting material!
R4/Estafette, stop knob for the sliding window. Suitable for Renault R4 + Estafette. Color: beige
Note: Inclusive fixing bolt.
R4/Estafette, stop knob for the sliding window. Suitable for Renault R4 + Estafette. Color: black
Note: Inclusive fixing bolt.
R4/Estafette, stop knob for the sliding window. Suitable for Renault R4. Color: grey! Note: It is
only the synthetic button, without fixing bolt.
R4/Estafette, stop knob for the sliding window. Suitable for Renault R4. Color: black! Note: It is
only the synthetic button, without fixing bolt.
R4/Estafette/Caravelle, connecting rod bearing set, 3 oversize (+0,75). Wide one: 20,75mm. Suitable
for Renault engines (5 crankshaft bearings, Cleon) 688 172,688,1 + 688.01 to year of construction 1975 (1108cc). All other engines 689 710 / C1C 700 (956cc) + 688 711 + 713. C1E 700, 754, 715, 720, 750 (1108cc). 813-02 (852cc).
R4/Estafette/Dauphine/Floride, piston + liner (4 pieces). Engine: Ventoux 670, 670-1, 670-5
800-02. Engine capacity: 845ccm. Suitable for Renault R4 (5CV), Estafette (R1090, 1091, 1092, 1092, 1095, 2101 2130, 2131), Dauphine + Ondine + Gordini, Floride, Fourgonette, R6 (R1180 09/1968 to 04/1969). Bore: 58,0mm. Piston pin: 14 x 48mm. Piston rings: 1,75 + 2 + 3,5mm. Outside diameter down: 62,50mm. Outside diameter above: 73,0mm. Height totally: 126,0mm. Attention: It is importand that the liners are mounted with copper rings at the bottom. Our article number 80182
R4/F4/F6, front axle stabiliser. Diameter: 16mm. Without fixing material. Suitable for Renault R4
R4 F4, R4 F6, R6. The 16mm stabilizer was originally only used for R4 F4 + R4 F6. However, it can be fitted to the saloons without any problems. The thicker stabiliser gives a slightly firmer ride. Mady in Europe
R4/rear engine, brake fluid reservoir with locking cap. Suitable for many Renault. Diameter: 57mm
Reservoir amount with locking cap: 97mm. Threaded connection on the master brake cylinder: M16 x 1,5.
R4/rear engine, master brake cylinder sealing set. For piston diameters: 3/4 inch. Suitable for
early Renault R4. Renault 4CV, Dauphine, Floride, Caravelle, R8, R10.
R4/ Rear engine, wheel brake cylinder sealing set. For piston diameters: 15/16 inch. Suitable for
early Renault R4. Renault 4CV, Dauphine, Floride, Caravelle.
R4/ Rear engine, wheel brake cylinder sealing set. For piston diameters: 19mm. Suitable for early
Renault R4. Renault 4CV, Dauphine, Floride, Caravelle, Estafette.
R4/ Rear engine, wheel brake cylinder sealing set. For piston diameters: 22mm. Suitable for early
Renault R4. Renault 4CV, Dauphine, Floride, Caravelle.
R4/rear engine, wheel brake cylinder front on the left. Suitable for Renault R4, sixties. Renault
4CV, Dauphine, Floride, R8. Piston diameter: 22,2mm. Brake line connector: 3/8 x 24. Mounting board bore: 32mm. Length over everything: 60mm. Made in Spain.
R4/rear engine, wheel brake cylinder front on the right. Suitable for Renault R4, sixties. Renault
4CV, Dauphine, Floride, R8. Piston diameter: 22,2mm. Brake line connector: 3/8 x 24. Mounting board bore: 32mm. Length over everything: 60mm. Made in Spain.
R4/R16/Estafette, master brake cylinder sealing set (single circuit brake system). For piston
diameters: 19mm. Suitable for Renault R4, starting from year of construction 1970. Renault R16 + Estafette.
R4/R16/R12, brake power controller. 4x 3/8x24UNF brake pipe connections. Suitable for Renault R4
of year of construction 1976 to 1986. Renault R16 TL, of year of construction 01/1971 to 12/1976. Renault R5, Renault R12. Or. No. 770685455. Attention, there are also vehicles with 3x 3/8 + 1x 7/16 connection. For these purposes we have a suitable adapter (84372) in our delivery programme.
R4/R16/R12, brake power controller: Brake line adapter from 3/8x24 UNF to 7/16x20UNF, for "E
flanging. Attention: There are brake power controller with 3x 3/8 + 1x 7/16 brake line connections. Our brake controller 84076 has only 4x 3/8x24 connections!
R4/R16/R12, brake power controller: Brake line adapter from 3/8x24 UNF to 7/16x20UNF, for "F
flanging. Attention: There are brake power controller with 3x 3/8 + 1x 7/16 brake line connections. Our brake controller 84076 has only 4x 3/8x24 connections!
R4/R3, spur gear (idler gear) Novotex. Suitable for Renault R3 + R4. 35 teeth. Inside diameter
35,75mm. Outside diameter: 100,06mm.
R4/R3/Dauphine Gordini/Dauphine/Floride, engines: 680 (603cc/747cc, bore 54.50mm), 839 (782cc, bore
55.80mm), 670-04-05 / 800 (845cc, bore 58.00mm). Complete engine gasket set, including cylinder head gasket. Without valve stem seals and oil seals. Please pay close attention to the cylinder head gasket + timing case gasket!
R4/R5, thrust washer - brass sealing disc. This disc is mounted on the drive shaft and seals the
wheel bearing to the rear. Suitable for Renault R4, R5, R6. Or. No. 7700528678
R4/R5, brake caliper seal kit. Brake system: Bendix. Suitable for Renault R4 + R5. Piston diameter
45 mm. Please note: The seal kit is supplied with 2 different dust caps, as there were 2 different versions in production at Bendix!
R4/R5, brake caliper sealing set. Brake system: Lucas Girling. Suitable for Renault R4 + R5. Piston
diameter: 45mm. Amount of dust cap: about 10mm. The dust cap is fastened with a metal ring!
R4/R5, brake caliper sealing set. Brake system: Lucas. Piston diameter: 45mm. Suitable for Renault
R4 + R5. Amount of the dust cap: 7,5mm.
R4/R5, Lucas + Bendix brake caliper: guide sleeve set. Suitable for Lucas Girling + Bendix brake
caliper. This repair kit is suitable for the following vehicles: Renault R4, R5, Clio 1, Espace 1+2, Twingo 1, Super 5, R9, R11, R18. Alpine V6 1 (1985>1992), Fuego. Citroen C25 + Peugeot J5, Peugeot 205.
R4/R5, brake caliper front on the left (new part). Brake system Bendix. Suitable for Renault R4 +
R5. Return of old-part not necessary.
R4/R5, brake caliper front on the right (new part). Brake system Bendix. Suitable for Renault R4 +
R5. Return of old-part not necessary.
R4/R5, brake caliper, front on the left (new part). Brake system: Lucas Girling. Suitable for
Renault R4 + R5. Piston diameter: 45mm. Or. No. 7701201168.
R4/R5, brake caliper, front on the right (new part). Brake system: Lucas Girling. Suitable for
Renault R4 + R5. Piston diameter: 45mm. Or. No. 7701201169.
R4/R5, brake hose front. Suitable for Renault R4, starting from year of construction 1976 (drum
brake). Renault R5. Length: 506mm. Thread: 1x male thread 3/8 x 24UNF. 1x female thread 3/8 x 24UNF. Or. No. 7701000239. Made in Europe.
R4/R5, master brake cylinder, dual circuit brake system. Brake system: Bendix (disc brake front)
Suitable for Renault R4 (R1128, S128) to chassis number 0033059. Renault R5 to year of construction 1985. Piston diameter: 20,64mm. Connecting thread: 3x M10x1. Or. No. 7700617299. Made in Europe.
R4/R5, master brake cylinder, dual circuit brake system. Brake system: Bendix (disc brake front)
Suitable for Renault R4, starting from year of construction 1/1983 (to chassis number 461100). R4 F6 to chassis number 0361750. R5 TL + GTL. Piston diameter: 19,05mm. Brake line connector: 3x M10x1 + 1x M12x1. Or. No. 7700678528 + 770134915. Made in Europe.
R4/R5, master brake cylinder, dual circuit brake system. Brake system: Bendix (disc brake front)
Suitable for Renault R4, starting from chassis number 461101. R4 F4, R4 F6, starting from year of construction 9/1978. Renault R5, to year of construction 1985. Piston diameter: 19,05mm. Brake line connector: 3x M10x1. Original equipment quality.
R4/R5, piston + liner (4 item). Suitable for Renault R4 (R1123, R1124, R2104, R2106), of year of
construction 1969 to 1986. Renault R5L + R6. Engine: 800 B1B, 800 10 02/03/01/05. Engine capacity: 845cc. Compression: 8: 1. Piston pin: 16 x 49mm. Piston rings 2,0/2,0/3,5. Outside diameter down: 62,50mm. Outside diameter above: 69,80mm. Height totally: 126,0mm. Mounting with paper seal for the liners (no copper seal)
R4/R5, piston + liner (4 item). Suitable for Renault R4 (R1126, 2109, 2392). R5 (R1220). Engine
839. Engine capacity: 782cm ³. Bore: 55,80mm. Piston pin: 16 x 46mm. Piston rings: 1,75 + 2.0 + 3,5mm.
R4/R5, piston + liner (4 item). Suitable for Renault R4 + R5. Engine: 689.10. C1C. 956cc (37
44HP). Bore: 65mm. Piston pin: 18 x 57mm. Piston rings: 1,75 + 2.0 + 3,5mm. Outside diameter down: 75,50mm. Outside diameter above: 85,80mm. Height totally: 135,0mm
R4/R5, piston rings, for 1 piston. Suitable for Renault R4 + R5. Bore: 65,0mm. Engine capacity
956cc. Piston rings: 1,75 + 2.0 + 3,5mm.
Radiator cap expansion tank, blue, 0.70 bar. Suitable for Renault R4 with 0,8/1,1 L engines
(1123,1128,112C). Also for Renault R5, R9, R12, 21, SUPER5
R4/R5, Steering gear adjusting washer set (7 pieces). Dimension from 8.9 to 14.99mm. With this kit
you always have the right washer. These shims are for the correct alignment of the steering gear (to avoid distortion). See the workshop manual! There are 7 different adjusters! Suitable for Renault R4 + R5. Or. No. 7700555563 to 7700555569
R4/R5, light switch (steering column switch, light on + off, low beam + high beam), suitable for
Renault R4, from 1979 to 1986. Renault R5. Or. No. 7701348654
R4/R5, engine block screw plug. Thread: 1/8 NPT (very similar to M10x1, often confused). Suitable
for Renault R4 and R5 (engine 688, C1E + CIC, cubic capacity 956cm³ + 1108cm³). This screw is mounted at least 2x in the engine block. For complete draining of the coolant from the engine, this screw can be unscrewed! Or. No. 7703075009
R4/R5, engine gasket set completely (without shaft seals). Engine: 813-02. Suitable for Renault R4
(852cc), starting from year of construction 1972 (FASA). Renault R5 TL (R1222-2382), 950cc. Of year of construction 1972 to 1975. Bore: 61,4mm.
R4/R5, engine gasket set completely, inclusive shaft seals. Engine: C1C + 688 C1E-714/718,(956cc +
1108cc). Suitable for Renault R4. Renault R5 TL. Bore: 65 + 70mm.
R4/R5, O-ring for the drive shaft flange at the gearbox. Suitable for Renault R4, starting from
year of construction 1974. Renault R5 (type 354 - HA0). Or. No. 7700532957
R4/R5, wheel brake cylinder rear. Suitable on the left + on the right. Brake system: Bendix
Suitable for Renault R4 (R1128 starting from 07/1982, R112C starting from 7/1986, R2340 + 2430 starting from 10/1977). Renault R5 TL, TS, GTL, LS, Alpine. Renault R6. Piston diameter: 22,2mm. Brake line connector: 3/8 x 24UNF. Mounting board bore: 32mm. Length: 59mm. Made in Europe.
1984 Articles | Page 29 of 40
Select your Citroen 
Please select your Peugeot 
Please select your Citroen Renault 
