floor panels for Renault DS

Sheet metal (crossbar above the main muffler) under the front seats. Suitable for Citroen DS

Length 1260mm. Or. No. DS743-2

Floor pan for the floorwell rear. Suitable for Citroen DS. With all flanges + reinforcement

Optically like original! Or. No. 5417173C. Shipping is only possible by forwarding agent.

Floor pan completely. Suitable for Citroen DS, starting from year of construction 1961. Or. No

5417173R

Floor pan completely. Suitable for Citroen DS, to year of construction 1961. Or. No. DS744-2

Floor pan on the left. Reinforcing plate (reinforcement on the floor pan). Bottom surface floor pan

to box sill sheet metal. Suitable for Citroen DS Berline.

Floor pan left. Reinforcing plate (double reinforced) underside base plate to sill plate. Suitable

for Citroen DS Break and Cabriolet. Or. No. DVB744-319A

Floor pan edge on the left, wide. With all flanges. Over the complete length. Suitable for Citroen

DS. Length: 1495mm. Wide one: 243mm.

Floor pan edge on the right, wide. With all flanges. Over the complete length. Suitable for Citroen

DS. Length: 1495mm. Wide one: 243mm.

Floor pan on the right. Reinforcing plate (reinforcement on the floor pan). Bottom surface floor

pan to box sill sheet metal. Suitable for Citroen DS Berline.

Floor pan on the right. Reinforcing plate (double reinforced) underside base plate to sill plate

Suitable for Citroen DS Break and Cabriolet. Or. No. DVB744-319A

Floor pan in front (floor of the car floorwell in front). Suitable for Citroen DS. The sheet metal

has all flanges and reinforcement such as original. Or. No. 7D5417173F. Shipping is only possible by forwarding agent.

Floor pan between tank floor plate and baggage compartment floor. Fits for Citroen DS Sedan, up to

year of manufacture 1962.

Floor pan between tank floor plate and baggage compartment floor sheet metal. Reinforced version

from 1,5mm sheet metal. The sheet metal has 2 reinforcements for the jacking points. Suitable for Citroen DS Sedan, from year of manufacture 1962 to 1974.

Floor plate, footwell in front right. Suitable for Citroen DS.

Floor pan, locking cap made of metal. Suitable for Citroen DS.

Edge of the floor pan (reinforced) on the left with flanges. Suitable for Citroen DS BREAK + Cabrio.

Edge of the floor pan (reinforced) on the right with flanges. Suitable for Citroen DS BREAK +

Cabrio.

Floor pan edge on the left (with flanges). This repair sheet metal is about 20cm wide and over the

whole length of the floor plate in the interior. It is the connection to the left box sill at the floor pan. Suitable for Citroen DS.

• Suitable for this article
• 
  Floor pan edge on the right (with flanges). This repair sheet metal is about
  55,43 €

Floor pan edge on the right (with flanges). This repair sheet metal is about 20cm wide and over the

whole length of the floor plate in the interior. It is the connection to the right box sill at the floor pan. Suitable for Citroen DS.

• Suitable for this article
• 
  Floor pan edge on the left (with flanges). This repair sheet metal is about
  55,43 €

Floor plug, metal, serrated, DS

Rubber plug (conical, for 18,0mm bore). Suitable for Citroen DS. This rubber is mounted in the

floor pans. Or. No. DS744-129

Trunk floor. Suitable for Citroen DS sedan, starting from year of construction 1968. Like original

Best quality at the market. The boot floor has 2 holes for a rubber (drain holes). Or. No. D742-97

• Suitable for this article
• 
  2CV, trunk floor, rubber plug. The rubber plug was mounted also in Rear end
  2,96 €

Baggage compartment floor sheet metal. Suitable for Citroen DS, starting from year of construction

1968. Reinforced version from 1,5mm sheet metal. Very good reproduction! The boot floor has 2 holes for a rubber (drain holes). Or. No. D742-97

• Suitable for this article
• 
  2CV, trunk floor, rubber plug. The rubber plug was mounted also in Rear end
  2,96 €

Boot floor panel. Suitable for Citroen DS, up to year of construction 1968.

Box sill repair interior sheet metal on the left. This sheet metal is the complete web plate of the

box sill. At the bottom edge the floor pan is welded (the holes in the sheet metal are for the spot welding). Suitable for Citroen DS sedan.

Box sill repair interior sheet metal on the right. This sheet metal is the complete web plate of

the box sill. At the bottom edge the floor pan is welded (the holes in the sheet metal are for the spot welding). Suitable for Citroen DS sedan.

Tank base vertical wall. Suitable for Citroen DS. Premium reproduction such as original! With all

flanges and reinforcement.

Tank floor plate (without vertical sheet metal). Suitable for Citroen DS. Premium reproduction such

as original (1,2mm sheet thickness)! With all flanges and reinforcement.

Tank bottom plate complete (metal pan under the seat). Suitable for Citroen DS, from year of

construction 1961. Or. No. 5417174R

Tank floor plate, with flanges. Suitable for Citroen DS Berline + DS BREAK.