for Renault Mehari

Master brake cylinder, LHM brake system. Dual circuit brake system. Brand manufacturer! Suitable

for Citroen 2CV6, from year of construction 9/1981 (vehicles with front disc brake). Dyane, ACDY, Mehari. Piston diameter: 17,5mm. Brake line connection: 2x 8,0mm. Attention: Use only LHM hydraulic fluid (coloured green) as brake fluid. Normal brake fluid (DOT4) destroys the brake system within 24 hours (life-threatening). LHM brake parts are marked green! All 2CVs with front disc brakes have only LHM brake fluid!

• Suitable for this article
• 
  LHM+ green, hydraulic fluid. 1 liter. Suitable for Citroen 2CV starting from
  9,38 €
• 
  Master brake cylinder metal sleeve, for the connector in the engine front wall
  2,93 €
• 
  Master brake cylinder seal in the engine front wall. Suitable for Citroen 2CV
  4,51 €

Master brake cylinder, LHM brake system. Dual circuit brake system. Reproduction. Suitable for

Citroen 2CV6, from year of construction 9/1981 (vehicles with front disc brakes). Dyane, ACDY, Mehari. Piston diameter: 17,5mm. Brake line connection: 2x 8,0mm. Made in Europe. Attention: Use only LHM hydraulic fluid (coloured green) as brake fluid. Normal brake fluid (DOT4) destroys the brake system within 24 hours (life-threatening). LHM brake parts are marked green! All 2CVs with front disc brakes have only LHM brake fluid!

• Suitable for this article
• 
  LHM+ green, hydraulic fluid. 1 liter. Suitable for Citroen 2CV starting from
  9,38 €
• 
  Master brake cylinder metal sleeve, for the connector in the engine front wall
  2,93 €
• 
  Master brake cylinder seal in the engine front wall. Suitable for Citroen 2CV
  4,51 €

Main cable harness, suitable for Citroen Mehari, starting from year of construction 09/1974 to

07/1981. Made in Germany.

• Suitable for this article
• 
  Tail cable harness, suitable for Citroen Mehari. Made in Germany.
  118,01 €

Lever, for the parking brake pad (per piece). Suitable for Citroen 2CV, Dyane, Nehari

• Suitable for this article
• 
  Eccentric for the hand brake handle at the brake caliper (per piece). Suitable
  4,15 €
• 
  Screw set (2 item) for the securement the lever (parking brake) at the brake
  6,84 €

Screw set (2 item) for the securement the lever (parking brake) at the brake caliper. Suitable for

Citroen 2CV6, Dyane, Mehari, AMI8.

Tail cable harness, suitable for Citroen Mehari. Made in Germany.

• Suitable for this article
• 
  Main cable harness, suitable for Citroen Mehari, starting from year of
  429,29 €

Heating air fan for the installation into the heating hose of Citroen 2CV. The hose is cut through

and mounted then the fan between the heating hose ends. Optically almost invisibly. The mounting material is provided. The fan has the following dimensions: 80mm diameter, construction length 50mm.

Heating hose Dyane, Mehari, 70mm inside diameter, length 490mm.

Heater adjustment lever with fixture. Suitable for Citroen 2CV, HY, Mehari. Chrome-plated. Or. No

o. 5403748

Heater hose inside Citroen Mehari. Diameter 45mm, 500mm long, not isolated.

Heater hose on the left of Citroen Mehari. Diameter 70mm, 580mm long, isolate with 10mm foam

m material. Heat exchanger to distributor in the front wall.

Heater hose on the right of Citroen Mehari. Diameter 70mm, 490mm long, isolated with 10mm foam

material. Heat exchanger to distributor in front wall.

Heater cable sheet metal holder, securement of the heater cable on the heat exchanger. This sheet

metal holder is for both heater cables. Suitable for Citroen 2CV.

Heater cable sheet metal holder, securement of the heater cable on the heat exchanger. This sheet

metal holder is for one heater cable. Suitable for Citroen 2CV.

Heater cable short, suitable for Citroen 2CV, for all years of construction. Installed one between

the heating exchangers in the engine compartment. Depending upon year of construction it can be possible that the cable must be cut.

Heater cable tension force clamp (wide) on the heat exchangers, for Citroen 2CV. With this tension

force clamp the two heater cables are adjusted. Significant after production from the European Union. Or.Nr. AZU 644-101

Heater cable tension force clamp (wide) on the heat exchangers, for Citroen 2CV. With this tension

force clamp the two heater cables are adjusted. Or.Nr. AZU 644-101

Heli coil application M7. Length: 10,5mm (Thread repair)

Heli coil application M7. Length: 14,0mm (Thread repair)

Heli coil application M7. Length: 7,0mm (Thread repair)

Thread Repair Kit M7x1, for repairing damaged threads. For plating threads in materials with low

shearing strength 1 twist drill, 1 tap, 1 installation tool, 1 tang breaker, 25 x M7x1 coil.

Helicoil repair set for M7. Consisting of: Twist drill (to M12), hand taps from HSS, mounting

spindle, insertion pin breaker (to M12). In each case, 10 theaded inserts M7 in the lengths: 7,0mm, 10,5mm, 14,0mm. Original Helicoil, no reproduction.

Roll Pin Assortment, 450 pcs. Diameter from 2 > 10mm, lenght 5>50mm.

Cavity preservation on wax basis, for cavity pistol, 1 litre.

• Suitable for this article
• 
  Underbody coating nozzle (gun) + cavity preservation nozzle (gun), for 1 liter
  26,68 €

Body cavity protection spray, 500 ml. Inclusive hollow space probe

• Suitable for this article

Cavity probe (60cm) for fluid film spray can (21127)

Hone segment 100x10mm (3 fittings) for engine cylinder hone 20918.

Hone segment 30x4mm (2 fittings) for brake cylinder hone 20916.

Horn (12 V), completely with air compressor + 2 x compressed air horn, relay and air hoses. 750 +

800Hz (2 different tones). 115dB (A). Length of the air horns: 210 + 165mm. Length of the air compressor: about 105mm.

Horn (trumpet) 12 V, high tone. 480Hz, 108dB (A). Very high quality horn, made in the European

Union. The horn is made of metal, with a red cover (trumpet) from plastic! Universal fitting. Diameter: about 110mm. ECE checked.

Horn (trumpet) 12 V, deep tone. 420Hz, 108dB (A). Very high-quality horn, made in the European

Union. The horn is made of metal, with a red cover (trumpet) from red synthetic! Universal fitting. Diameter: about 110mm. ECE checked.

Horn, 12V. Universal fitting.

Horn 12 V, high tone. 430Hz, 114dB (A). Very high quality horn, made in the European Union. The

horn is from the front in red painted! Universal fitting. Diameter: about 91mm. Metal housing. ECE checked.

Horn 12 V, deep tone. 340Hz, 114dB (A). Very high quality horn, made in the European Union. The

horn is from the front in red painted! Universal fitting. Diameter: about 91mm. Metal housing. ECE checked.

Horn, 12Volt. Universal fitting. Diameter 100mm! The horn is chromium-plated.

Horn set (2 pieces) chrom-plated, from Bosch. Frequencies: 325 and 400 Hertz. Volume: 118 db(A)

operating voltage: 12 V, power consumption: 48 W each, diameter: 156 mm, depth: 91 mm, EMV protection: included. Universal fitting.

Hydraulic + brake pipe handle made of metal. The fixture has a rubber lining and is to attach

Suitable for 4,5mm line.

Hydraulic + brake pipe handle made of metal. The fixture has a rubber lining and is to attach

Suitable for 6,35mm line.

Hydraulic + brake pipe handle made of metal. The fixture has a rubber lining and is to attach

Suitable for 8,0mm line.

Hydraulic + brake pipe handle to attach, from synthetic. Suitable for 3,75mm line.

Hydraulic + brake pipe handle to attach, from synthetic. Suitable for 4,5mm line.

Hydraulic + brake pipe handle to attach, from synthetic. Suitable for 6,35mm line.

Hydraulic line and Brake line flaring tool for use at the vehicle! For all lines with 3,5mm, 4,5mm

6,35mm (1/4 "). (Citroen)

• Suitable for this article
• 
  Brake pipe bending pliers! Been suitable for sheet metal, copper, stealing and
  25,29 €

Hydraulic line Brake line flaring tools for use at the vehicle (to use at the car). For all

flanging! For all Citroen lines with 3,5mm, 4,5mm + 6,35mm (1/4 "). For all lines after DIN/CSAE, for flanges of the types CD, E, F, F180 in the usual quantities 4,75mm, 6mm, 8mm, 9mm and 10mm.

• Suitable for this article
• 
  Brake pipe bending pliers! Been suitable for sheet metal, copper, stealing and
  25,29 €

Brake line flaring tool, for brake and hydraulic lines. Particularly for Citroen connectors. With

thrust pieces for 3,5mm + 4,5mm lines (8,0mm + 9,0mm Clinch screws).

• Suitable for this article
• 
  Brake pipe bending pliers! Been suitable for sheet metal, copper, stealing and
  25,29 €

Hydraulic hose rubber 4.5 mm LHS (red) + normal brake fluid DOT3 + DOT4. Top quality (new improved

reproduction made from EPDM). Suitable for Citroen DS with LHS hydraulic system, Citroen HY + 2CV, AMI with 4.5 mm brake line (9 mm screw connection).

Impregnation spray 500ml, for material hoods, please impregnate the hood at least in spring and

d autumn!

Interior insulation mat (approx 10mm thick), self adhesive, optically as from the years 60s to

approx. end of the 70s. Dimensions: approx. 115 x 55cm (about 600g/m²). These mats have the greenish colour of the original felt mats (made from recycled cotton fibres), but have been manufactured according to today's automotive technology. Flame retardant, no harmful vapours! Completely "Made in Germany". These mats were installed in firewalls, doors, side panels, boot. For the vehicle floor we recommend the mats with a heavy layer (bitumen-like). We have been looking for them for a long time, and finally found some!

Interior insulation mat (approx 15mm thick), self adhesive, optically as from the years 60s to

approx. end of the 70s. Dimensions: approx. 115 x 55cm (about 900g/m²). These mats have the greenish colour of the original felt mats (made from recycled cotton fibres), but have been manufactured according to today's automotive technology. Flame retardant, no harmful vapours! Completely "Made in Germany". These mats were installed in firewalls, doors, side panels, boot. For the vehicle floor we recommend the mats with a heavy layer (bitumen-like). We have been looking for them for a long time, and finally found some!

Interior insulation mat (approx 20mm thick), self adhesive, optically as from the years 60s to

approx. end of the 70s. Dimensions: approx. 115 x 55cm (about 1200g/m²). These mats have the greenish colour of the original felt mats (made from recycled cotton fibres), but have been manufactured according to today's automotive technology. Flame retardant, no harmful vapours! Completely "Made in Germany". These mats were installed in firewalls, doors, side panels, boot. For the vehicle floor we recommend the mats with a heavy layer (bitumen-like). We have been looking for them for a long time, and finally found some!