R16R15/R17, connecting rod bearing set. Standard size. Suitable for Renault R16, R15, R17. Renault
Alpine (4 cylinders), Fuego, R20, Trafic. Engines: 697/807/821/843. Reproduction from the EU.
for Renault R16
1064 Articles | Page 16 of 22
R4/rear engine, brake fluid reservoir with locking cap. Suitable for many Renault. Diameter: 57mm
Reservoir amount with locking cap: 97mm. Threaded connection on the master brake cylinder: M16 x 1,5.
R4/R16, ball and socket joint above. Suitable for R16 R1152 to chassis no.02401. Pin height to area
for screwing: 61mm. Thread height: 20mm. Thread measurement: M12 x 1,25. Or. No. 7701453299 / 7701455299
R4/R16/Estafette, master brake cylinder sealing set (single circuit brake system). For piston
diameters: 19mm. Suitable for Renault R4, starting from year of construction 1970. Renault R16 + Estafette.
R4/R16/R12, brake power controller. 4x 3/8x24UNF brake pipe connections. Suitable for Renault R4
of year of construction 1976 to 1986. Renault R16 TL, of year of construction 01/1971 to 12/1976. Renault R5, Renault R12. Or. No. 770685455. Attention, there are also vehicles with 3x 3/8 + 1x 7/16 connection. For these purposes we have a suitable adapter (84372) in our delivery programme.
R4/R16/R12, brake power controller: Brake line adapter from 3/8x24 UNF to 7/16x20UNF, for "E
flanging. Attention: There are brake power controller with 3x 3/8 + 1x 7/16 brake line connections. Our brake controller 84076 has only 4x 3/8x24 connections!
R4/R16/R12, brake power controller: Brake line adapter from 3/8x24 UNF to 7/16x20UNF, for "F
flanging. Attention: There are brake power controller with 3x 3/8 + 1x 7/16 brake line connections. Our brake controller 84076 has only 4x 3/8x24 connections!
R4/R5/R16, brake power controller - connecting bolt (regulating rod) for brake load-dependent
actuation (on the rear axle). The bolt is threaded and the tractive force is adjusted via 2 nuts. This bolt is suitable for the brake power controller with 3 and 4 lines! Suitable for Renault R4, R5 TS + TL, R16. Or. No. 7700506146 + 6001003791
R4/R5/R16, brake power controller suspension spring. This spring is suitable for the brake power
controller with 3 and 4 lines! The brake power controller is suspended from this spring! Suitable for Renault R4, R5 TS + TL, R16. Or. No. 7700514841
R4/R5/R16, brake power regulator bracket. This bracket is suitable for the brake power regulator
with 3 and 4 lines! Suitable for Renault R4, R5 TS + TL, R16. Or. No. 7700629722 + 7700629723
R4/R5/R16, brake power controller tension spring (for brake load-dependent actuation). This spring
is suitable for the brake power controller with 3 and 4 lines! Suitable for Renault R4, R5 TS + TL, R16. Or. No. 7700514080
R4/R5/R16, brake power controller, 3 brake line connectors (2x E-flange + 1x F-flange). Suitable
for Renault R4, starting from year of construction 1968. Renault R16, all model`s. Renault R5 TS + TL, R6
R4/R5/R16, electric motor for the radiator fan. Suitable for R4 (1108cc). Renault R5, R6, R9, R11
R14, R16, R18, R19, Espace. Or. No. 7700828623
R4/R5/R16, Kühlerlüfter incl. Lüfterflügel. Passend für Renault R4 (1108ccm), R5, R6, R9, R11
R14, R16, R18, R19, Espace.
R4/R5/R16, locking ring for radiator fan (fixing fan blade to fan motor). For 8mm shaft. Suitable
for Renault R4 (1108ccm), R5, R6, R9, R11, R14, R16, R18, R19, Espace.
R4/R5/R6/R12/R16, steering gear bonded-rubber bushing (mounting of the tie rod), steering side
Suitable for Renault R4, R5, R6, R12, R16. Inside diameter: 10mm. Construction length inside: 28mm. Outside diameter: 28mm. Construction length outside: 20mm.
R4/R5/R6/R16, ball and socket joint above, for Renault R4, R5, R6. On the left + on the right
fitting. Installed starting from year of construction 1969. Renault R16 Installed of year of construction 9/1965 to 8/1980. Renault R12 starting from year of construction 1969. Original quality. Pin height to area for screwing: 55mm. Thread measurement: M10 x 1,25. Or. No. Or. Nr. 0996064400
R4/R5/R8/R10/Estafette/Caravelle, connecting rod bearing set. Width: 17.70mm. 0,25 oversize. Fits
Renault engines (5 crankshaft bearings, Cleon) with 54.8mm + 44mm diameter. Engines: 688 192 + 688.1 (1108cc). Engine 810.01 to 810.29 (1289ccm). 810.96 + 810.97 (1289ccm). 810 725, 810 726, 840 730, C2J 713, 8347 725.... C1G + C1J (1397ccm). Renault R4 (rarely used). Renault R5, R10, Estafette, R16 (all),....
R4/R5/R8/R10/Estafette/Caravelle, connecting rod bearing set. Width: 17.70mm. 0,50 oversize. Fits
Renault engines (5 crankshaft bearings, Cleon) with 54.8mm + 44mm diameter. Engines: 688 192 + 688.1 (1108cc). Engine 810.01 to 810.29 (1289ccm). 810.96 + 810.97 (1289ccm). 810 725, 810 726, 840 730, C2J 713, 8347 725.... C1G + C1J (1397ccm). Renault R4 (rarely used). Renault R5, R10, Estafette. R16 (all),.....
R4/R5/R8/R10/Estafette/Caravelle, connecting rod bearing set. Width: 17.70mm. Standard size. Fits
Renault engines (5 crankshaft bearings, Cleon) with 54.8mm + 44mm diameter. Engines: 688 192 + 688.1 (1108cc). Engine 810.01 to 810.29 (1289ccm). 810.96 + 810.97 (1289ccm). 810 725, 810 726, 840 730, C2J 713, 8347 725.... C1G + C1J (1397ccm). Renault R4 (rarely used). Renault R5, R10, Estafette, R16 (all),......
R4/R6/R16, brake power controller sealing set. For 3 + 4 connection brake power controller
Suitable for Renault R4, R6 + Renault R16 (R1156, R1157).
R5/R12/R16/R17/Alpine A310, Sealing set brake caliper in front, for Renault R5 starting from
01/1975, R12 all models, R15 all models, R16 all models, R17 Gordini, A310 of 6 liners of year of construction 1976 to 1980. 48mm piston, system Bendix. 2 different dust caps are attached. Mount the correct dust cap. The other cap, please dispose it.
Wheel Stud Restorer Kit. For repairing damaged wheel stud threads using a reverse action to ensure
the alignment of the thread. Includes adaptor sizes: M12 x 1.25mm. M12 x 1.5mm. M14 x 1.5mm.
Wheel bolt, suitable for many Renault (R5, R5 Alpine, R12, R16). Overall length: 38mm. Thread
M12x1,25. The wheel bolt head has a diameter of 18mm and is 5mm heavily. Or. No. 0554732800
Wheel cover screw. Suitable for Renault R4 (1120, 1123, 1125, 1126, 2106, 2108). Renault R12 + R16
Thread: M12 x 1,5. Length: 18mm. Tool: 17mm. Or. No. 7701088119 + 0608400900
Wheel cover screw. Suitable for Renault R4 (1123, 1125, 2108). Renault R12 + R16. Thread: M12 x
1,5. Length: 18mm. Tool: 19mm. Or. No. 7700562810
Wheel bearing rear, inside. Suitable for Renault R4, R12, Fuego, R15, R16, R17, R20, R30, R5, R6
R7. Outside diameter: 52mm. Inside diameter: 25mm. Wide one: 16,25mm. Made in Spain
Rear wheel bearing set (original equipment quality). Suitable for Renault R4. R5, R6, R8, Dauphine
e, R16 all models from year of construction 11/1976 to 1980. R12 from year of construction 1977 to 1980. Dimension bearing 1: 47x25x15 mm. Bearing 2: 42x20x15 mm. Or. No. 7701460642.
Rear wheel bearing set (replica). Suitable for Renault R4. R5, R6, R8, Dauphine, R16 all models
from year of construction 11/1976 to 1980. R12 from year of construction 1977 to 1980. Dimension bearing 1: Outside diameter: 47,0mm. Inner diameter: 25,0mm. Overall height: 15,0mm. Bearing 2: Outside diameter: 42,0mm. Inner diameter: 20,0mm. Overall height: 15,0mm. Or. No. 7701460642
Wheel bearing set of rear axle, suitable for Renault R4, R5, R16, R17. Bearing 1: Outside diameter
47mm, inside 20,0mm, wide one 15,25mm. Bearing 2: Outside diameter 52mm, inside 25mm, wide one 16,25mm. Dimension shaft seal: Outside diameter 58mm, inside 48mm, height of 4mm. Made in Spain
Wheel bearing set of rear axle. Suitable for Renault R4, R6, R16. Dimension bearing 1: Outside
diameter: 47mm. Inside diameter: 19,80mm. Wide 12,00mm. Dimension bearing 2: Outside diameter 52mm. Inside diameter: 25mm. Wide 13,00mm.
Wheel bearing set front axle. Suitable for Renault R16, R12. Bearing 1: Outside diameter: 72mm
Inside diameter: 35mm. Wide one: 21mm. Bearing 2: Outside diameter: 72mm. Inside diameter: 35mm. Wide one: 17mm.
Wheel nut, suitably for R16TX, R12, R15, R17, R18, R20, R30 etc. Thread: M12 x 1,25. Overall
height: 32,5mm. Tapered. Wrench: 19,0mm. Or. No. 7700618233
Wheel nut, suitable for Renault R16TX, R12, R15, R17, R18, R20, R30 etc.. Thread: M12 x 1.25
Height: 38.5mm. Tapered collar. Width across flats: 19.0mm. Or. No. 7700532727
The brake-down aid for on the road. SONAX TyreFix restores driveability to flat tyres, without tyre
change. Seals small holes in the tyre and pumps it up. Practical, fast and safe. 400ml
Tire valve adapter of TR13 (13mm) on TR15 (15mm). This adapter is required, if you have old rims
with 15mm hole for valves. New valves are always 13mm in the diameter.
Renault emblem, universal. Dimension: 62 x 50mm. Material: Synthetic. Fastening: 2x split pins with
5mm diameter (the pins have a bar, with bar the diameter is 6mm).
1064 Articles | Page 16 of 22
Select your Citroen 
Please select your Peugeot 
Please select your Citroen Renault 
