R4/R5/R16, brake power controller suspension spring. This spring is suitable for the brake power
controller with 3 and 4 lines! The brake power controller is suspended from this spring! Suitable for Renault R4, R5 TS + TL, R16. Or. No. 7700514841
Search in Renault-R16 for Renault 16
357 Articles | Page 6 of 8
R4/R5/R16, brake power regulator bracket. This bracket is suitable for the brake power regulator
with 3 and 4 lines! Suitable for Renault R4, R5 TS + TL, R16. Or. No. 7700629722 + 7700629723
R4/R5/R16, brake power controller tension spring (for brake load-dependent actuation). This spring
is suitable for the brake power controller with 3 and 4 lines! Suitable for Renault R4, R5 TS + TL, R16. Or. No. 7700514080
R4/R5/R16, brake power controller, 3 brake line connectors (2x E-flange + 1x F-flange). Suitable
for Renault R4, starting from year of construction 1968. Renault R16, all model`s. Renault R5 TS + TL, R6
R4/R5/R16, electric motor for the radiator fan. Suitable for R4 (1108cc). Renault R5, R6, R9, R11
R14, R16, R18, R19, Espace. Or. No. 7700828623
R4/R5/R16, Kühlerlüfter incl. Lüfterflügel. Passend für Renault R4 (1108ccm), R5, R6, R9, R11
R14, R16, R18, R19, Espace.
R4/R5/R16, locking ring for radiator fan (fixing fan blade to fan motor). For 8mm shaft. Suitable
for Renault R4 (1108ccm), R5, R6, R9, R11, R14, R16, R18, R19, Espace.
R4/R5/R6/R12/R16, steering gear bonded-rubber bushing (mounting of the tie rod), steering side
Suitable for Renault R4, R5, R6, R12, R16. Inside diameter: 10mm. Construction length inside: 28mm. Outside diameter: 28mm. Construction length outside: 20mm.
R4/R5/R6/R16, ball and socket joint above, for Renault R4, R5, R6. On the left + on the right
fitting. Installed starting from year of construction 1969. Renault R16 Installed of year of construction 9/1965 to 8/1980. Renault R12 starting from year of construction 1969. Original quality. Pin height to area for screwing: 55mm. Thread measurement: M10 x 1,25. Or. No. Or. Nr. 0996064400
R4/R5/R8/R10/Estafette/Caravelle, connecting rod bearing set. Width: 17.70mm. 0,25 oversize. Fits
Renault engines (5 crankshaft bearings, Cleon) with 54.8mm + 44mm diameter. Engines: 688 192 + 688.1 (1108cc). Engine 810.01 to 810.29 (1289ccm). 810.96 + 810.97 (1289ccm). 810 725, 810 726, 840 730, C2J 713, 8347 725.... C1G + C1J (1397ccm). Renault R4 (rarely used). Renault R5, R10, Estafette, R16 (all),....
R4/R5/R8/R10/Estafette/Caravelle, connecting rod bearing set. Width: 17.70mm. 0,50 oversize. Fits
Renault engines (5 crankshaft bearings, Cleon) with 54.8mm + 44mm diameter. Engines: 688 192 + 688.1 (1108cc). Engine 810.01 to 810.29 (1289ccm). 810.96 + 810.97 (1289ccm). 810 725, 810 726, 840 730, C2J 713, 8347 725.... C1G + C1J (1397ccm). Renault R4 (rarely used). Renault R5, R10, Estafette. R16 (all),.....
R4/R5/R8/R10/Estafette/Caravelle, connecting rod bearing set. Width: 17.70mm. Standard size. Fits
Renault engines (5 crankshaft bearings, Cleon) with 54.8mm + 44mm diameter. Engines: 688 192 + 688.1 (1108cc). Engine 810.01 to 810.29 (1289ccm). 810.96 + 810.97 (1289ccm). 810 725, 810 726, 840 730, C2J 713, 8347 725.... C1G + C1J (1397ccm). Renault R4 (rarely used). Renault R5, R10, Estafette, R16 (all),......
R4/R6/R16, brake power controller sealing set. For 3 + 4 connection brake power controller
Suitable for Renault R4, R6 + Renault R16 (R1156, R1157).
R5/R12/R16/R17/Alpine A310, Sealing set brake caliper in front, for Renault R5 starting from
01/1975, R12 all models, R15 all models, R16 all models, R17 Gordini, A310 of 6 liners of year of construction 1976 to 1980. 48mm piston, system Bendix. 2 different dust caps are attached. Mount the correct dust cap. The other cap, please dispose it.
Wheel bolt, suitable for many Renault (R5, R5 Alpine, R12, R16). Overall length: 38mm. Thread
M12x1,25. The wheel bolt head has a diameter of 18mm and is 5mm heavily. Or. No. 0554732800
Wheel cover screw. Suitable for Renault R4 (1120, 1123, 1125, 1126, 2106, 2108). Renault R12 + R16
Thread: M12 x 1,5. Length: 18mm. Tool: 17mm. Or. No. 7701088119 + 0608400900
Wheel cover screw. Suitable for Renault R4 (1123, 1125, 2108). Renault R12 + R16. Thread: M12 x
1,5. Length: 18mm. Tool: 19mm. Or. No. 7700562810
Wheel bearing rear, inside. Suitable for Renault R4, R12, Fuego, R15, R16, R17, R20, R30, R5, R6
R7. Outside diameter: 52mm. Inside diameter: 25mm. Wide one: 16,25mm. Made in Spain
Rear wheel bearing set (original equipment quality). Suitable for Renault R4. R5, R6, R8, Dauphine
e, R16 all models from year of construction 11/1976 to 1980. R12 from year of construction 1977 to 1980. Dimension bearing 1: 47x25x15 mm. Bearing 2: 42x20x15 mm. Or. No. 7701460642.
Rear wheel bearing set (replica). Suitable for Renault R4. R5, R6, R8, Dauphine, R16 all models
from year of construction 11/1976 to 1980. R12 from year of construction 1977 to 1980. Dimension bearing 1: Outside diameter: 47,0mm. Inner diameter: 25,0mm. Overall height: 15,0mm. Bearing 2: Outside diameter: 42,0mm. Inner diameter: 20,0mm. Overall height: 15,0mm. Or. No. 7701460642
Wheel bearing set of rear axle, suitable for Renault R4, R5, R16, R17. Bearing 1: Outside diameter
47mm, inside 20,0mm, wide one 15,25mm. Bearing 2: Outside diameter 52mm, inside 25mm, wide one 16,25mm. Dimension shaft seal: Outside diameter 58mm, inside 48mm, height of 4mm. Made in Spain
Wheel bearing set of rear axle. Suitable for Renault R4, R6, R16. Dimension bearing 1: Outside
diameter: 47mm. Inside diameter: 19,80mm. Wide 12,00mm. Dimension bearing 2: Outside diameter 52mm. Inside diameter: 25mm. Wide 13,00mm.
Wheel bearing set front axle. Suitable for Renault R16, R12. Bearing 1: Outside diameter: 72mm
Inside diameter: 35mm. Wide one: 21mm. Bearing 2: Outside diameter: 72mm. Inside diameter: 35mm. Wide one: 17mm.
Wheel nut, suitable for Renault R16TX, R12, R15, R17, R18, R20, R30 etc.. Thread: M12 x 1.25
Height: 38.5mm. Tapered collar. Width across flats: 19.0mm. Or. No. 7700532727
Rosette from rubber synthetic, frame of the trunk lock, suitable for Renault R16, R5, R6, R18. 1
art drinking hook. Inside diameter: about 20mm. Outside diameter: about 32mm. Or.Nr. 556130100
Rosette from rubber synthetic, frame of the door lock, suitable for Renault R16, R6. 4 synthetic
hooks. Inside diameter: about 20mm. Outside diameter: about 32,5mm. Or.Nr. 7700565962
Switch for the reversing lamp. Suitable for Renault R4, R5, R6, R16. Thread: M16 x of 1,0. 2
electric plug contacts.
Washer reservoir, suitable for Renault R4, R16. Original Renault, no reproduction. The reservoir is
supplied without lid. Or. No. 77.04.000.003
Windscreen washer foot pump seal. This is the seal that is fitted under the foot pump (seal to the
floor pan). Suitable for Citroen 2CV up to the year of construction 1970 (depending on country of delivery). Citroen Dyane, Acadyane. Renault R4 + R16.
Foot switch for the disk wiping water! Suitable for Renault R4 + R16. Or. No. 7701002908. Original
no reproduction. Fixing bolts center - center: 67mm. Note: The pump have only 1 line connection.
Blank key for door lock. Suitable for Renault R12, from 1969 to 1971. R15 from 1971 to 1979. R16
from 1965 to 1980. R17 from 1971 to 1979. R5 from 1972 to 1979. R6 from 1968 to 1980. For lock manufacturers: RONIS. Please observe the cross section of the key bit. Shaft length: 19,8mm. Shaft wide: 7,0mm.
Blank key for starter lock + door lock. Suitable for Renault R16, of year of construction 1965 to
1980. Talbot 1000, 1005, 1006, 1007, 1100, 1301, 1501, to year of construction 1973. Bagheera starting from 1973. For lock manufacturers: NEIMAN. Please observe the cross section of the key bit. Shaft length: 23,15mm. Shaft wide: 7,0mm.
SEV, distributor rotor SEV. Type S4510. For distributors with contact cassette. Suitable for
Citroen DS + HY. Peugeot 504 GR, SR (from year of construction 1979). Renault R4 GTL (R1128, 2370 2430), R8, R10, R12, Renault R16, R18, Fuego. Matra Bagheera. Or. No. Peugeot: 5937.27 + 5937.07. Renault: 7701020056
PDF FILE 
Safety belt automatic mechanism. An alternative for the original belts from Citroen DS (fits very
well). This belt can be also mounted in (as alternative, deviating from the original belt. Please note the dimensions): Peugeot 304, 203, 403, 404, 504 Pick UP. Renault Dauphine, Fregate, Floride + Caravelle to year of construction 1963, Renault R4 starting from year of construction 1978, R16. Belt length 297cm. Buckle connection 45cm. The belt has a "E" approvals! All the seat belts we offer are made in England. Strictly according to European car industry specifications, and of course have the required test marks. Your safety is close to our hearts. Therefore, we do not import cheap safety belts from Asia!
Shaft seal differential, complete in metal cage and felt cover. Dimension: 36 x 54 x 11mm. Suitable
for Renault R4, R5, R6, R15, R16. Or. No. 7703087011
Shaft seal differential. Dimension: 36 x 54 x 7,5mm. Suitable for Renault 4 (final version), R5
R6, R15, R16. Made in Germany. Or. No. 7703087087
Shaft seal crankshaft rear. Dimension: 80 x 100 x 13mm. Improved version from silicone. Suitable
for Renault R4 (955, 956, 1108cc). R5, Estafette, R12, Fuego, R11, R20, R30, R25, R16, R15.Peugeot 504 V6, 604 V6, Citroen XM V6.
Shaft seal crankshaft in front (35 x 50 x 10). Suitable for many Renault (R4, R5, R8, R10 R9, R12
R16, Fuego etc.). Or. No.7703087097
Shaft seal wheel bearing rear, inside. Dimension: 44.7 x 54 x 6/7,9mm. Suitable for Renault rear
engines, R4, R5, R6, R12, R14, R16, R17, R18
357 Articles | Page 6 of 8
Select your Citroen 
Please select your Peugeot 
Please select your Citroen Renault 
