Generator Renault R5, of year of construction 1972 to 1985. Renault R16, various years of
construction. External battery charging regulator. 12 V. 40 ampere. Assembly position: 60°. Mounting holes: 10mm.
Search in Renault-R16 for Renault 16
357 Articles | Page 1 of 8
Drain hose for the water tank under the wind deflector (A-pillar). Actually suitable for the
Renault R16. However, as many people are looking for these exhaust air hoses (regardless of whether for French, German or other cars), the hose can also be used for other vehicles. Better than nothing. The hose is very flexible and has a kind of funnel on one side. Total length: 640 mm. Inner funnel diameter: approx. 25 mm. Inner hose diameter: 12 mm. Outer diameter: 17 mm.
High performance starter motor (from 1.0 litre cubic capacity engines). One for almost all classic
Renault! 12 Volt, 1.4KW! This smart high-performance starter motor has an intermediate gearbox. As a result, it has approx. twice the performance of a standard starter motor with half the power consumption and only 3.8kg weight! Based on a DENSO motorsport starter. Thanks to its removable and rotatable mounting plate, the starter can be installed in 20 different positions! Suitable for Renault R4 1,0 + 1,1L (1971>1993). R5 1,0/1,1/1,3/1,4L + Alpine. R12 1,3L & Gordini. R15 all, R16 all (1965>1979). Estafette 1,3L (1969>1981). Alpine A110 (1,3L). Rene Bonnet Djet (Gordine 1108 engine) 1961>1964.
Collar drive shaft, wheel side (with clips and lubricating grease). Suitable for Renault R12, R14
R16, R17, R18, R20. Diameter inside: 20 + 76mm. Or. No. 7701457539
Collar drive shaft, wheel side. Suitable for Renault R16, R5 Super, R9, R11, Fuego. Peugeot 205
Talbot 1307, 1308, 1510, Solara. Inside diameter: 28mm + 78mm
Collar drive shaft, wheel side. Suitable for Renault R4, R5, R6, R12, R15, R16, R17. Inside
diameter: 16 + 68mm: Overall length: 100mm.
Exhaust valve, suitable for Renault R16 (1470ccm), starting from year of construction 1966. R16L +
TL (1565ccm), starting from year of construction 1978. Diameter: 31,3mm. Length: 103mm. Shank: 8mm.
Outlet valve, suitable for Renault R16TL + TS + TX (1565cc + 1647cc), starting from year of
construction 1973. R15TS (1565cc), starting from year of construction 1973. R17TL + TS (1565+1647cc), starting from year of construction 1973. Length: 110,70mm. Shank: 8,0mm. Diameter: 35,40mm. 1 notch at the shank!
Clamp at the chassis. Original Renault. This clip was nearly at all Renault R4, R16, R12, Dauphine
etc. installed. Or. No. 7701493039
Gasoline pump mechanically. Suitable for Peugeot 504,2.7 (Cabrio + Coupe). Renault R16, R17, R18
(1,6L + 1,7L), Renault R30 V6. Gasoline line connections: 8,0mm. Push rod length: 41mm
Gasoline pump reproduction. 3 x gasoline line connection. Suitable for Renault R16 (R1156 + R1157)
all 1,6L engines. Alpine 110 (1500cc). Renault R17, Fuego, R20, R15, R30.
Gasoline pump, 3x gasoline line connection. Suitable for Renault R4, R5, R6, R12, R16 1,6. Good
reproduction, completely made of metal. Only left hand drive (LHD).
Gasoline pump. 2x gasoline line connection (6mm). Suitable for Renault Alpine A110 (1500cc), of
year of construction 1966 to 1967. Renault R16 (1150, 1152, 1153), of year of construction 1968 to 06/1972.
Brake shoes rear. Brake system: Lucas Girling. Suitable for Renault R16, R20, R30. Peugeot 204 +
304. Drum diameter: 228mm. Lining-wide: 42mm. Original equipment quality.
Brake shoes mounting set (rear). Brake system: Girling Lucas. Suitable for Renault R16. For drum
diameters: 228,6mm. Lining-wide: 42mm.
Brake shoes to rivet. Drum = 228 mm, diameter = 40mm wide. (189x40x5mm + 244x40x5mm). Peugeot 304
Renault R4, R5, R12 Break, R16.
Brake shoe set rear, system Bendix. Drum diameter: 228mm. Lining-wide: 40mm. Suitable for Renault
16 (R1150/R1157), of year of construction 07/1967 to 1970.
Brake pads front (1 set). Brake system: Bendix. Suitable for Renault R4, R5, R16, R15, Alpine A310
R12, Alpine 1600S. Wide one: 108,9mm. Amount: 49mm. Heavy one: 14,0mm. Reproduction
Brake pads in front, Renault R16, to year of construction 09/1968. System Bendix. Wide one: 95mm
Amount: 40,5mm: Heavy: 12mm. Or. No. 7701348999. Made in Europe.
Stop light switch, 2 pole. Thread: M10 x 1. Suitable for Renault R4, R5, R16. Citroen AX, BX, CX
starting from year of construction 1981. Peugeot 205, 504, 505. Talbot Samba.
Sealing set wheel brake cylinder rear (7/8 inch = 22,2mm). Suitable for Citroen HY, of year of
construction 1963 to 1968. Renault Estafette, starting from year of construction 1967. Renault R16.
Seal intake manifold (per piece). Suitable for Renault R16 (R1151, 1154). R12 (1.6 Gordini). R15 +
R17. Fuego (1,6L). Or. No. 0857720900
Seal intake manifold (per piece). Suitable for Renault R16 1,6/TS/TX. Renault R15 + R17 (1.6 L
engine). Fuego (1,6L). Or. No. 0857720800
Seal exhaust elbow. Suitable for Renault R16 (R1151, 1154). R12 (1.6 Gordini). R15 + R17. Fuego
(1,6). Or. No. 7700501840
Seal for the spark plug tube (under the valve cap). Suitable for Renault R8, R10, R12, R16, R20
Fuego, Alpine. Or. No. 782600400
Seal Y-pipe. Suitable for Renault R16 (R1151, 1154). R12 (1.6 Gordini). R15 + R17. Fuego (1,6L)
Peugeot 505,2.0 TI/STI + 2.2 GTI. Or. No. 7700657683 + 7701036761
Seal on the left, for the gear shift axle, at the gearbox (365 gearboxes). Suitable for all Renault
with 365 gearboxes. E.G. Renault R12, R16, R20, Fuego, Alpine. Or. No. 0608357000. Opening diameter: 15 + 25mm. Length: 25mm.
Seal on the right, for the gear shift axle, at the gearbox (365 gearboxes). Suitable for all
Renault with 365 gearboxes. E.G. Renault R12, R16, R20, Fuego, Alpine. Or. No. 0608353800. Opening diameter: 23 + 25mm. Length: 35mm.
Differential bearing adjusting nut, with shaft seal. Suitable for Renault R4, R5, R6, R12, R16 (4
gear gearbox). Outside diameter: 74,0mm. Inside diameter: 35,5mm. Overall height: 18,0mm. Or. No. 0556231900 + 7700554257
Differential bearing adjusting nut, with shaft seal. Suitable for Renault R4, R5, R6, R12, R16 TX
(5 gear gearbox). Outside diameter: 74,8mm. Inside diameter: 35,0mm. Overall height: 16,0mm. Or. No. 7700634643
Ducellier, contact conversion kit to electronic ignition contact. This easy-to-install conversion
kit replaces the original contact with a "Hall sensor". The original distributor is retained (i.e. also the mechanical early ignition adjustment). Advantages: No wear on contacts, better control of the ignition coil. Attention: Better than contacts but not comparable with a fully electronic ignition system. Suitable for Ducellier distributor on Renault R4(1108cc), R5(845+956cc),R6(1108cc), R10(1108+1289cc), R12(1289cc), R15(1289+1565cc), R16(1565+1647cc). Peugeot 204(1120cc), 404(1618cc), 504 (1796+1971cc). Wherever the contact 34028(D304) + 82635 is installed, the conversion kit can be fitted quickly! Red cable = "+" Plus via ignition key - ignition current (terminal 15). Black cable = To ignition coil "-" negative (terminal 1). The condenser is omitted. It is no longer needed.
Ducellier, ignition contact (D304). Suitable for nearly all French car´s with Ducellier
distributor. E.G. Citroen DS, Citroen 11CV, HY. Peugeot 204, 304, 203, 403, 404, 504, J7. Renault R4, R5, R6, R8, R10, R12, R16, R17. Length of the contact: about 37mm. The cable is firmly mounted at the contact.
Ducellier, ignition contact + condenser (D304). Suitable for Citroen DS (engine DY3). Citroen HY
Peugeot 304, 404, 504, J7. Renault R4, R5, R6, R8, R10, R12, R16, R17. Contact length: 37mm. The connection cable is firmly mounted on the contact.
Ducellier, ignition contact + condenser. Suitable for R4 GTL, starting from year of construction
1984 (1108cc, R112, R2370, R210B). Renault R16, Alpine A110, R12, R5, R6, R18, R20. Citroen CX Athena, Reflex. Original manufacturer! Made in France.
Ducellier, ignition contact. Suitable for Renault R4, R5, R9, R16, R20. Renault Alpine A110
0. Citroen CX 1. Volvo 350-343-345 (B14. Or. No. Renault 7701200739. Or. No. Citroen 95534913. Made in Spain.
Ducellier, dust cap in the distributor for all Ducellier distributors (the cap is transparent)
Suitable for Renault R4, R5, R6, R8, R10, R12, R16, R15, R17, R18, R20, Fuego. Or. No. 7701020304.
Ducellier, distributor arm. Suitable for Citroen DS starting from year of construction 9/1972, CX
up to 1980, HY. Renault R4GTL, R5, R16. Peugeot 204, 304S, 404, 504. Version D216. Length over everything: 46mm. Height over everything: 36mm. Inside diameter: 15mm. Or. No. Citroen: 5452421. Peugeot: 5937.05. Renault: 0854120600
PDF FILE 
Ducellier, distributor cap + distributor arm. Suitable for Citroen DS, from of year of construction
10/1959 to 04/1966. Citroen HY. Renault Alpine 1300, from of year of construction 01/74 to 12/75. Peugeot 204 + 304, 404, 504. Renault R4, R5, R6, R10, R12, R15, R16, R17, R20. Height over everything: 65mm. Inside diameter: 65mm.
Ducellier, distributor cap, ignition cable outlet above (D216). Suitable for Citroen DS (up to year
of construction 1972). Citroen HY + 11CV. Peugeot 204, 304, 403, 404, 504. Renault R4, R16. Diameter on distributors: 64mm. Height over everything: 65mm. Inside diameter: 65mm. Made in France.
Ducellier/SEV, dust cap in distributor (for Ducellier + SEV distributor with 60mm inner dimension)
Suitable for various Renault (R16, R12........)
Inlet valve, suitable for Renault R16 (1470ccm), starting from year of construction 1966. R16L + TL
(1565ccm), starting from year of construction 1978. Diameter: 35mm. Length: 102,90mm. Shank: 8mm.
Inlet valve, suitable for Renault R16TL + TS + TX (1565cc + 1647cc), starting from year of
construction 1973. R15TS (1565cc), starting from year of construction 1973. R17TL + TS (1565+1647cc), starting from year of construction 1973. Length: 110,70mm. Shank: 8,02mm. Diameter: 40mm.
Exhausting filter for engine exhausting. Suitable for Renault R16, R15, R17. Citroen CX 2400, etc
Dimension: Diameter above: 30mm. High of filter: 28mm. Overall height: 46mm. Connection diameter: 18mm. Or. No. 7700550429 + 96072385
Spare parts catalog, reprint. Suitable for Renault R16 L, TL (R1152-R1153), starting from year of
construction 10/1973. 291 sides
Rim Alpine Design. Size: 5.0 x 13. Offset: 24. Bolt circle: 3 x 150. This rim in Alpine Design
silver front and rim base, fits front and rear axle. Hub cap is included. Body modifications not necessary. The rim comes with parts approval for the Renault R12, R15, R16 + R17.
357 Articles | Page 1 of 8
Select your Citroen 
Please select your Peugeot 
Please select your Citroen Renault 
