for Sonstige-Citroen Alle
Hydraulic line and Brake line flaring tool for use at the vehicle! For all lines with 3,5mm, 4,5mm
6,35mm (1/4 "). (Citroen)
Hydraulic line Brake line flaring tools for use at the vehicle (to use at the car). For all
flanging! For all Citroen lines with 3,5mm, 4,5mm + 6,35mm (1/4 "). For all lines after DIN/CSAE, for flanges of the types CD, E, F, F180 in the usual quantities 4,75mm, 6mm, 8mm, 9mm and 10mm.
Brake line flaring tool, for brake and hydraulic lines. Particularly for Citroen connectors. With
thrust pieces for 3,5mm + 4,5mm lines (8,0mm + 9,0mm Clinch screws).
Hydraulic line seal 6,35mm, for LHM (green) hydraulic system. 10mm outside diameter! About 10mm
long. Suitable for Citroen DS, CX, GS, SM, BX, XM etc.
Hydraulic line rubber 6,35mm, LHM (green), 10mm outside diameter! About 8mm long. Suitable for
Citroen DS, CX, GS, SM, BX, XM etc.
Hydraulic line rubber 6,35mm. LHM (green). 12mm outside diameter. About 10mm long. Only suitable
for Citroen DS + SM, with LHM hydraulic system. This heavy rubber is for the connection at the brake system accumulator.
Interior insulation mat (approx 10mm thick), self adhesive, optically as from the years 60s to
approx. end of the 70s. Dimensions: approx. 115 x 55cm (about 600g/m²). These mats have the greenish colour of the original felt mats (made from recycled cotton fibres), but have been manufactured according to today's automotive technology. Flame retardant, no harmful vapours! Completely "Made in Germany". These mats were installed in firewalls, doors, side panels, boot. For the vehicle floor we recommend the mats with a heavy layer (bitumen-like). We have been looking for them for a long time, and finally found some!
Interior insulation mat (approx 15mm thick), self adhesive, optically as from the years 60s to
approx. end of the 70s. Dimensions: approx. 115 x 55cm (about 900g/m²). These mats have the greenish colour of the original felt mats (made from recycled cotton fibres), but have been manufactured according to today's automotive technology. Flame retardant, no harmful vapours! Completely "Made in Germany". These mats were installed in firewalls, doors, side panels, boot. For the vehicle floor we recommend the mats with a heavy layer (bitumen-like). We have been looking for them for a long time, and finally found some!
Interior insulation mat (approx 20mm thick), self adhesive, optically as from the years 60s to
approx. end of the 70s. Dimensions: approx. 115 x 55cm (about 1200g/m²). These mats have the greenish colour of the original felt mats (made from recycled cotton fibres), but have been manufactured according to today's automotive technology. Flame retardant, no harmful vapours! Completely "Made in Germany". These mats were installed in firewalls, doors, side panels, boot. For the vehicle floor we recommend the mats with a heavy layer (bitumen-like). We have been looking for them for a long time, and finally found some!
Interior insulation mat for the floor (10mm thick), optically as from the years 60s to approx. end
of the 70s. Dimensions: approx. 105 x 55cm (approx. 2900g/m²). These mats have the greenish colour of the original felt mats, with an additional heavy layer (modern bitumen, does not age, does not crack, UV resistant, water repellent, state-of-the-art automotive technology, but with the look of the old days!) The insulation material is flame retardant, no harmful vapours! Completely "Made in Germany". These mats are laid on the vehicle floor or cardan tunnel. Heavy layer to the carpet side! The heavy layer also prevents "droning noises". The mats can be deformed by heat and adapt to the contours.
Interior insulation mat for the floor (approx 15mm thick), optically as from the years 60s to
approx. end of the 70s. Dimensions: approx. 105 x 55cm (approx. 3200g/m²). These mats have the greenish colour of the original felt mats (made from recycled cotton fibres), with an additional heavy layer (modern bitumen, does not age, does not crack, UV resistant, water repellent, state-of-the-art automotive technology, but with the look of the old days!) The insulation material is flame retardant, no harmful vapours! Completely "Made in Germany". These mats are laid on the vehicle floor or cardan tunnel. Heavy layer to the carpet side! The heavy layer also prevents "droning noises". The mats can be deformed by heat and adapt to the contours.
Interior insulation mat for the floor (approx 20mm thick), optically as from the years 60s to
approx. end of the 70s. Dimensions: approx. 105 x 55cm (approx. 3500g/m²). These mats have the greenish colour of the original felt mats (made from recycled cotton fibres), with an additional heavy layer (modern bitumen, does not age, does not crack, UV resistant, water repellent, state-of-the-art automotive technology, but with the look of the old days!) The insulation material is flame retardant, no harmful vapours! Completely "Made in Germany". These mats are laid on the vehicle floor or cardan tunnel. Heavy layer to the carpet side! The heavy layer also prevents "droning noises". The mats can be deformed by heat and adapt to the contours.
Inside mirror chromium-plates. Dimension about: 125 x 55mm. The mirror does not have a fixture
only a moving threaded bolt with M5 thread.
Instrument fixture (made of metal) for 1 additional instrument with 52mm diameter. Universal
fitting. Made in Germany.
Instrument fixture (made of metal) for 2 additional instruments with 52mm diameter. Universal
fitting. Made in Germany.
J5/C25, exhaust rear silencer. Suitable for Peugeot J5 (1,8 + 2,0), starting from year of
construction 1981. Citroen C25 (1,8 + 2,0), starting from year of construction 1981. Or. No. 1725.81
J5/C25, elbow pipe in front. Suitable for Peugeot J5 + Citroen C25, starting from year of
construction 11/1981. For engine: Petrol 2,0. Or. Nr. 1703.06
J5/C25, exhaust elbow pipe in front. Suitable for Peugeot J5 D, starting from year of construction
1981. Citroen 25 D, starting from year of construction 1981 (2.5 Diesel). Or. No. 1703.07
Rubber bearing for wishbone Citroen C25, Peugeot J5, Fiat Ducato. On the left of or on the right
fitting. Inside diameter of 18mm, outside diameter 34mm, height of 40,6mm. Or. No. Fiat 4331968
J5/C25, master brake cylinder sealing set for 22,2mm piston, brake system Bendix. Suitable for
Peugeot J5, Citroen C25.
J5/C25, air filter A847. Suitable for Citroen C25 Diesel (2,5D), starting from year of construction
10/1983. Peugeot J5 Diesel (2,5D), starting from 10/1983. Outside diameter: 140mm. Height: 296mm. Or. No. 1444.01
J5/C25, tie rod without tie rod end, on the left + on the right fitting. Thread M16 x 1,5. Citroen
C25 + Peugeot J5, without power steering. Installed to year of construction 1990. Or. No. 381227
Tie rod end Citroen C25, Peugeot J5, Fiat Ducato. Starting from year of construction 1981, on the
left + on the right fitting. Thread M16x1,5, right-hand thread.
J5/C25. Heater radiator (heat exchanger) suitable for Peugeot J5 + Citroen C25. Installed from year
of construction 10/1985 to 03/1994. Length: 243mm. Wide one: 177mm. Deep 42mm.
Brake pads in front Peugeot J5, Citroen C25 + C35, Ducato. Heavy 19,5mm, height of 71,7mm, wide one
144,9mm. Brake system Lucas!
K-Jetronic: System pressure control device in the fuel didtributor housing (for the constant
pressure in the fuel system of the K-Jetronic). Suitable for Peugeot 205 (1.8 turbo), 504 Cabrio + Coupe (V6 2,7L), 505 (2.0 + 2.2), 604 (2.7 + 2.8). Renault R5 (1.4 turbo 2), R30.
K-Jetronic: thermo-time switch (limits the injection time of the cold start valve in dependence of
the engine temperature). Suitable for Citroen CX2400 IE, CX 25 IE, of year of construction 06/1977 to 06/1986. Peugeot 505 2.2 (05/1981 to 12/1988), 604 2.8. Renault R5 1.4 Turbo2. R17 1,6. Overall length: 88mm. Thread: M14x1,5. Minimal delay: 1s > 35°C. Nominal delay: 8s > -20°C.
Cable binder from rubber. Length: 12 x 160mm. Made in Germany. Now manufactured from improved
material (NBR/SBR fabric rubber)
Cable tie made of rubber, for 2CV/DS, like the original. Length: 270mm, breadth:12mm. Made in
Germany. Now manufactured from improved material (NBR/SBR fabric rubber)
Cable tie made of rubber, for 2CV/DS, like the original. Length: 320mm, breadth: 12mm. Made in
Germany. Now manufactured from improved material (NBR/SBR fabric rubber)
Cable binder from rubber. Length: 50mm. Made in Germany. Now manufactured from improved material
(NBR/SBR fabric rubber)
Cable tie assortment (black). 75 pieces. Content: 25 cable ties 3.0 x 100 mm, 25 cable ties 3.0 x
120 mm, 25 cable ties 3.6 x 200 mm
